Your cart is empty.
Your cart is empty.Restore, cushion, and protect your existing office chair armrests with this easy solution. These armrest covers provide durable cushioning to the elbows and forearms and the most professional, built-in, upholstered look. The soft neoprene material stretches and conforms around most chair armrests from 13" long up to approximately 17" long and covers armrests up to 4" wide. Longer stretches reduce coverage width. The neoprene material is covered with soft black fabric. Underneath is an elastic opening for a snug secure fit. Existing armrest pads should allow these covers to stretch completely over and around the tips. If needed, momentarily loosening your existing armrest attachment screws may help to optimize installation of the covers. Non-removable upholstered armrests may be compatible by pulling and flossing the elastic under one tip at a time. It is usually easiest to hook the covers over one end, then stretch them over the other end. These armrest covers are very durable and the materials can handle tight stretches. This is the perfect solution to repair armrests with deteriorating upholstery or to cover up old surface damage to arm pads and restore them like new. This item is durable and hand washable. For illustration purposes, our product images may show the armrest covers installed on a chair. This offer is for armrest covers, the chair is not included. Pricing is per complete set (right and left). Specify a Qty of 1 for 1 set, 2 for 2 sets... etc. Simple to install. Attachment Method - Elasticly stretches to fit snug over existing chair arm pads for a smooth built-in look. The stretchable material fits most chair armrest shapes. These armrest covers are ambidextrous and not specific to right arm or left arm, they work on either side. Made in the USA by Ergo360.
TJM
2025-08-20 16:50:00
The arms on our home office chair were peeling off badly. These covers fit nicely and were easy to put on. They seem to stay in place without problem. The material is thick with a slight bit of padding. The covers shipped with foam inserts. I don’t know if that was just to maintain shape during shipping, or if they are intended to add extra padding to the chair arms under the covers. I didn’t find them necessary and just tossed them.
Charles A. Eckert
2025-08-03 15:55:51
I have to admit I was a bit skeptical while looking for these items, but I decided to give it a shot.I will say they are very nice arm rest covers that fit amazingly well. Once on my arm rests they are a tight fit .I chose to use the pads with them, although they would fit very well without them. I would definitely purchase again. Give them a try and I don't think you will be disappointed. The only con I have is they are a little pricy.
4indog
2025-08-02 11:15:28
Like the facts that they are made in the US by a small business and are easy to install. Most pleased with their comfort.
Dopy Doorite
2025-07-04 13:26:21
The armrests on my 2 year old RealSpace (Best Buy) office chair are pathetically padded at the factory. I just wore out my 2nd pair of strap-on pads. Those are too thick, and the straps wear out after a few months of use. So, I thought I'd try these, even though they cost considerably more.They were a little cumbersome to install at first. I had trouble getting them to stay in place while stretching them over the length of the armrests at first. But I finally did get them installed, as so far they are great. The padded cushioning feels more natural and much more comfortable than the others, and they look better as well. My only complaint is that by stretching them lengthwise, the width shortens, and they don't quite cover the armrest completely. But it's not that noticeable while sitting in the chair.I noticed another reviewer removed the armrests and stapled these cushions in place. That won't work in this RealSpace chair because the covers aren't long enough, or wide enough to stretch under the existing pads, unless the padding in the covers aren't used. But then, in my case, the purpose would be defeated.
Donna O
2025-05-28 12:19:36
These are very well made and I’m definitely happy I purchased them. It made my arms on the chair look new again.
tonya pierce
2025-05-14 11:36:30
I bought these to cover the leather arms on my computer chair that are cracked and frayed. They fit length ways but they are about an inch short on both sides. They still work just wish they were a little wider.
Misteron
2025-05-01 16:41:09
I have a Lane Office Chair that is covered by bonded Leather and is 6 years old. The right Armrest is bonded Leather and is mounted on a Wood Mounting and it has cracked Leather in several areas. I have repaired those cracks with a clear Vinyl and Leather repair that works very well, but it looks bad when done. I tried to loosen the Armrest per the instructions,but it did no good because the Leather Armrest had bonded itself to the Wood over time and would not Budge. The Armrest is the maximum that this product will fit,which is 18 inches long and 4 inches wide. I had to remove the Foam inserts because I knew that these Covers would never fit with those inside. It took a lot of effort to stretch the Covers and several attempts, but I managed to get the Cover on the left Armrest ok. The right Armrest, which was the one that I repaired, went on ok,but started to slip off over time. I had to repeat the process 3 or 4 times before it seemed to stay on for good. My Chair is brown and the Covers are black, but black is a neutral color and some of the trim on the Chair is black as well, so right now my Chair looks as good as the day I bought it. Overall, I am happy with this product.
TJR
2025-04-12 11:50:15
I bought this to cover arm rests on my home office chair. In 7 months one of the covers shows significant wear. It does fit snuggly and otherwise looks good.
TJM
2025-04-08 14:12:15
The arms on our home office chair were peeling off badly. These covers fit nicely and were easy to put on. They seem to stay in place without problem. The material is thick with a slight bit of padding. The covers shipped with foam inserts. I don’t know if that was just to maintain shape during shipping, or if they are intended to add extra padding to the chair arms under the covers. I didn’t find them necessary and just tossed them.
Charles A. Eckert
2025-03-31 15:23:27
I have to admit I was a bit skeptical while looking for these items, but I decided to give it a shot.I will say they are very nice arm rest covers that fit amazingly well. Once on my arm rests they are a tight fit .I chose to use the pads with them, although they would fit very well without them. I would definitely purchase again. Give them a try and I don't think you will be disappointed. The only con I have is they are a little pricy.
4indog
2025-03-23 17:44:55
Like the facts that they are made in the US by a small business and are easy to install. Most pleased with their comfort.
Dopy Doorite
2025-03-18 15:06:37
The armrests on my 2 year old RealSpace (Best Buy) office chair are pathetically padded at the factory. I just wore out my 2nd pair of strap-on pads. Those are too thick, and the straps wear out after a few months of use. So, I thought I'd try these, even though they cost considerably more.They were a little cumbersome to install at first. I had trouble getting them to stay in place while stretching them over the length of the armrests at first. But I finally did get them installed, as so far they are great. The padded cushioning feels more natural and much more comfortable than the others, and they look better as well. My only complaint is that by stretching them lengthwise, the width shortens, and they don't quite cover the armrest completely. But it's not that noticeable while sitting in the chair.I noticed another reviewer removed the armrests and stapled these cushions in place. That won't work in this RealSpace chair because the covers aren't long enough, or wide enough to stretch under the existing pads, unless the padding in the covers aren't used. But then, in my case, the purpose would be defeated.
Donna O
2025-03-14 13:03:32
These are very well made and I’m definitely happy I purchased them. It made my arms on the chair look new again.
tonya pierce
2025-03-04 13:36:19
I bought these to cover the leather arms on my computer chair that are cracked and frayed. They fit length ways but they are about an inch short on both sides. They still work just wish they were a little wider.
Misteron
2024-12-12 16:05:44
I have a Lane Office Chair that is covered by bonded Leather and is 6 years old. The right Armrest is bonded Leather and is mounted on a Wood Mounting and it has cracked Leather in several areas. I have repaired those cracks with a clear Vinyl and Leather repair that works very well, but it looks bad when done. I tried to loosen the Armrest per the instructions,but it did no good because the Leather Armrest had bonded itself to the Wood over time and would not Budge. The Armrest is the maximum that this product will fit,which is 18 inches long and 4 inches wide. I had to remove the Foam inserts because I knew that these Covers would never fit with those inside. It took a lot of effort to stretch the Covers and several attempts, but I managed to get the Cover on the left Armrest ok. The right Armrest, which was the one that I repaired, went on ok,but started to slip off over time. I had to repeat the process 3 or 4 times before it seemed to stay on for good. My Chair is brown and the Covers are black, but black is a neutral color and some of the trim on the Chair is black as well, so right now my Chair looks as good as the day I bought it. Overall, I am happy with this product.
TJR
2024-12-10 17:52:59
I bought this to cover arm rests on my home office chair. In 7 months one of the covers shows significant wear. It does fit snuggly and otherwise looks good.
Recommended Products
