Your cart is empty.
Your cart is empty.Product Description
Solenoid Valve for Air co2 Water Products Features:
- This solenoid air valve body is made of high precision aluminum and has strong pressure resistance,good Seal, safe and reliable to use.
- The friction resistance in the hole is small, the starting air pressure is low, and the service life is long. Smooth work, no jam in high-speed use.
- Compact size, easy to assemble and disassemble.
- The 2v025-08 high-precision guide head is adopted, which is sensitive in response, and the response speed can reach 5 times/second.
- This product widely controls the flow of various types of fluids, such as air, water, mud, liquid metal, etc.
2-way normally closed solenoid air valve is to control On/Off of air and inert gas.
Operation principle: ln En-ergized State, Inlet &outlet Holes Open. ln Non-energized State,Inlet & Outlet Are Closed.
We have solenoid air valves of various specifications. Each solenoid air release valve has two interfaces. 1/4 inch or 1/8 inch NPT inlet and 1/4 inch or 1/8 inch NPT outlet.
Electric Solenoid Valve 12V 24V for Air co2 Water 1/4 1/8 Inch NPT 2 Way Normally Colsed
Safety & Convenience air valve
Our cap of solenoid air valve is made of waterproof material, which prevents metal screws from being exposed to the outside and fingers fromdirectly touching metal.lt's easier to use than others. lt can be screwed directly by hand, without a screwdriver.
High Quality Air Valve by AOMAG
It adopts aluminum air valve body with fine surface treatment, high durability and low air leakage. High-precision valve stem and seal design ensure sealing. Adopt pure copper high-precision pilot head inside, with high sensitivity, stability and no jamming. Long-term use is not easy to heat.
2 Way Normally Closed air valve
The screw threads of the inlet and the outlet are smooth, so that the working speed can be well ensured. Allows you to quickly install and disassemble solenoid air valves. This Solenoid Valve is greatly used for for Air CO2 Compressor.
AOMAG 2 Way 2 Position Solenoid Air Valve
Product Specification of co2 solenoid air valve
- Material:Stainless Steel, Aluminum
- Exterior Finish:Stainless Steel, Brass
- Type: 2 Way 2 Positions
- Inlet = Outlet = 1/4" FNPT or 1/8" FNPT
- Inlet Connection Type: National Pipe Tapered
- Specification Met: CE, ISO 9001, RoHS
- Voltage: DC12V,DC24V,AC 110V, AC 220V
- Operation Type:Internally Piloted Acting Type
The solenoid valve (also called co2 solenoid, air release valve, air horn valve, electric water valve, air idle control valve, air valve, air solenoid) is equipped with ED 100% packaged coil for continuous service and continuous energization.Solenoid valves with multiple voltages are available for you to choose from.
Solenoid Air Valve Installation Instructions
- Clean and rinse the impurities in the pipeline before installation.
- Be careful not to drop the debris into the pipeline to prevent blocking the solenoid air valve.
- Keep the direction of air valve body consistent with the flow direction of medium for installation.
- After the solenoid valve is connected, it should be confirmed whether it should be connected firmly.
WM NELSON
2025-09-01 18:45:35
I bought this to install on my compressor to drain water from the tank. works great!!
Jimmy
2025-08-24 17:11:47
Ok
Bobby J Mullinax
2025-08-04 15:51:06
These are good valves for the price. I used these to build a remote controlled braking system for a vehicle for crash testing purposes. The valve is energized remotely and then allows air flow from a storage tank to a shock mounted to the brake pedal. Has enough flow and pressure to fully move the shock, around a 5 in stroke, and maintain pressure on the pedal. Survived a 40 mile per hour impact and is still working fine. Very pleasantly surprised by the performance of this valve.
jim1945
2025-06-25 16:37:54
Seemed to work fine but is designed for air not liquid so flow was inadequate for my needs. Would like to see something in the description emphasizing that it is for air, not liquid, and that the orifice is correspondingly small. Otherwise it worked as advertised.
Kenneth
2025-06-19 18:12:58
Installed 2 of these in my car to actuate a pneumatic exhaust cutout. Knowing so little about inductive loads at the time of purchase I was surprised when it stalled my car upon releasing power. I didn't know it at the time but the collapse of the magnetic field in an inductive load sends a NASTY voltage spike into your electrical system. I added a diode backwards between the positive and negative leads when rewiring them and I never saw the problem again. They have worked as expected this entire time with absolutely no issues.
Luke
2025-06-09 19:15:24
Used 10 of these for a project, all 10 worked perfectly out of the box. They're cheap but the manufacturing is pretty good, the threads are cut well and fittings screw into them nicely. Very good considering the price.
Nicholas B.
2025-04-05 21:07:19
Don't buy, lost my money and gotta buy another one. Do yourself a favor and buy local stop screwing with shipping problems
Customer
2025-03-29 17:47:41
Product was exactly as described
Joël T.
2025-02-25 11:03:37
Très bon produit . Un peu lourd . Mais ça fait bien le job .
AJA
2025-02-22 14:40:18
Great quality, recommend it!
Alejandro MartÃnez de Maya
2025-02-20 11:28:52
Medidas contenidas buen funcionamientoCoge algo de temperatura perdonada preocupante
Allan G.
2025-02-19 11:50:48
Used on my sawmill for blade lube control, go through 1/4 of the lube I use to
Stuart Singer
2025-02-16 17:23:03
Thought this would work for an air horn. Sure it’s 1/4inch threads but the hole for the valve is tiny. It’s a great little unit and it works great but the air flow is seriously restricted.
Recommended Products
$29.99
$ 13 .99 $13.99