Your cart is empty.
Your cart is empty.The Spectra Precision CR700 Combination Laser Receiver is a machine mounted display receiver used on small grading and excavating equipment as well as a traditional laser receiver mounted to a grade rod. With super bright directional LEDs, it is ideal for entry-level machine grade display, specifically on mini-excavators and backhoes. This provides instant grade information to the operator and eliminates the need for a rod man in the trench. It uses the patented light bar technology incorporated in the HL family of Spectra Precision laser receivers, providing more accurate and consistent readings than traditional methods and with fewer electronic components. It has a working radius of 1500 ft (460 m) (laser dependent) and a laser detection height of 5 in (12.7 cm) for quick beam acquisition. Six accuracy setting fit any jobsite requirements from Ultra Fine (1/32 in - 0.5 mm) to Machine Coarse (1.0 in - 25. 0 mm). Three Beeper Volumes include medium and low and loud to 110 dBA. Automatic shutoff after 30 minutes of non-use conserves battery life. Environmental standard of IP67 - waterproof and dustproof - and superior drop protection ensure minimun downtime.
MrPowerLines
2025-09-04 12:09:05
Best laser receiver I have used.. mounted to Excavator boom yesterday and dug a level trench for a French drain. Wish I would have ordered it months ago!
Customer
2025-09-03 14:56:15
Got the Spectra cr700 delvered by courier to my door in less than three days.Works flawlessly out of the box. Might be a bit heavy on the rod compared to a normal sized receiver. Arrows very bright. Very good magnets too. Best price on the net and lowest shipping cost too.
Shawn E
2025-08-27 12:01:22
Excellent quality, accuracy and simple set up
D-Man
2025-08-03 17:27:07
The media could not be loaded.
Nick Swanson
2025-07-26 10:46:17
Strong magnets and works as it should so far.
Mark
2025-06-18 18:13:26
Description states is has 110db volume from the speaker. I tested the speaker in a protected area, (enclosed carport) there was no wind. 38 to 40db, laser not running. 45db laser running. Turned on receiver, moved away from laser noise, 78-80db about 12" away, in front of speaker. Moved to less than 1", 89-90db. Not anywhere near what is needed to be outside in an even somewhat busy (noise) area. I was showing a friend the receiver, who was about 12' away, and he said he could barely hear it. It does have bright leds.The display has Vs, one up and on down, and has lines to indicated how close to grade you are approaching. Would be nice to be able to plug in an amplifier, and 'blue tooth' to a speaker in the cab.Nice unit, no useful volume. Unit 5 stars, speaker 0.
Youracunce
2025-06-01 21:27:24
Works good with my rotary level. Comes with a magnet that stuck to my skid steer
Super T Powell
2025-05-22 17:34:59
I love this receiver. I currently using it with a Bosch laser. It is so much better than the receiver Tha came with the laser. Makes all the difference in the world. Love that it shows how far of grade you are with a digital read out in mm. It works fantastic when attached to my bobcat our excavator. Two thumbs up
R Lock
2025-05-20 13:12:07
Just as advertised
Jimmacni
2025-04-01 13:33:29
Have been looking for something that would make digging to a level much easier for single person operation. This CR600 is a great laser receiver that was delivered on time. I use it for site levelling with a 6ton digger also for digging drains. I set up the required slope on the laser level and dig with the aid of the red LEDs to the green light (on level) is reached without the need to get out of the cab or have a second person. Both the LEDs and the sounder are easily seen and heard from the cab with the front open and the machine level setting gets it to within 10mm on fine. Have also used the receiver with the magnetic base to set steel posts to the required level. All in all a great piece of kit for the price.
Wilson Isenor
2025-03-13 10:20:46
Works great, genuine product
leighthebuilder
2025-03-12 10:25:29
I love this thing, just saves so much time once you’ve setup.Would buy again no hesitation
James L
2025-02-17 19:31:13
Mounts on my e26 and works amazing! Trying it on a French drain this week.
Recommended Products
