Shopping Cart

Your cart is empty.

Your cart is empty.

Spectre Performance Air Intake Kit: High Performance, Desgined to Increase Horsepower and Torque: Fits 2015-2017 FORD (Mustang) SPE-9041

Free shipping on orders over $29.99

$195.00

$ 92 .99 $92.99

In Stock

About this item

  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. Spectre air intake systems are one of the easiest ways to increase horsepower.
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY


Spectre air intake systems are designed to increase horsepower and torque in your vehicle, while also working to protect your engine from harmful contaminants and debris. Each air intake system comes with a washable, reusable, low-restriction Spectre air filter, a polished aluminum intake tube, and a black powder-coated heat shield. Spectre air intake kits include the necessary rubber boots, velocity stack, stainless steel clamps, and all necessary hardware for an OE fit and finish. Vehicle Fitment: 2019 CHEVROLET Silverado 1500 LD; 2015-2019 CHEVROLET Suburban; 2015-2019 CHEVROLET Tahoe; 2019 GMC Sierra 1500 Limited; 2015-2019 GMC Yukon; 2015-2019 GMC Yukon XL; 2015-2018 CADILLAC Escalade; 2015-2018 CADILLAC Escalade ESV; 2014-2018 CHEVROLET Silverado 1500; 2014-2018 GMC Sierra 1500; 2015-2018 GMC Yukon Denali; 2015-2018 GMC Yukon Denali XL; 2014 GMC Sierra Denali


Environmentally Conscious Bargain Shopper
2025-08-11 11:25:42
The media could not be loaded.
M.Brock
2025-08-09 15:20:31
The instructions are clear, but the pictures not so much. I needed to go to Youtube to see where the "L" bracket goes on the frame because the picture wasn't detailed enough (too dark). It also wasn't too clear how to "assemble" the box, but common sense solved that issue.It comes packaged VERY well and secure (box inside a box) so everything arrived as it should and it good condition. Also, I've read all the other reviews and I did NOT experience any issues with a bolt or things vibrating off. It has collars on it that hold the whole assembly in place firmly so I have no worries there. Everything fit into the engine bay exactly as it should and I didnt have to force anything to make it fit.As for performance, it does what a cold air intake should. I can feel the difference when I mash on the gas and I can hear it as well. It's not obnoxiously loud as others have indicated and it doesn't drone. It certainly wakes up the sound of the V6 into something more throaty. I've owned multiple Cold Air Intakes over the years and even though this one is significantly cheaper than a K&N (or other brand), I can't tell the difference in regards to performance or sound. I wouldn't hesitate to order again.
tyler
2025-07-28 19:51:08
Works and sounds good. Don’t let people tell you it sounds like a v8 though. It does sound really good for a v6. Only issue i have with it is the filter sliding off the intake tube. I just put a little silicon on it and it works great
Adrian
2025-07-08 09:45:23
Really easy to install. Makes my car sound louder(good) and has a really nice sucking sound! It also did increase horsepower as well as throttle response and acceleration.
Alex
2025-07-02 12:37:49
More sound, fast Throtle response! Sound like a real V6
xoxo5
2025-05-09 13:27:57
The Spectre 9041 Air Intake I purchased came packaged very well. All the parts needed to assemble and replace the factory intake were included in the kit. I was able to assemble the kit, remove the factory intake and put the Spectre 9041 intake in; in about 45 minutes...the intake seems to be working well in my 2016 Ford Mustang with improved horse power and fuel consumption...
Tawnya
2025-03-16 11:54:22
Nice for the price. It wasn’t too easy to install though. Hard to fit even though it was “made” for my model and year of car
Hoboken Power Wash
2025-03-15 10:59:15
Installation was easy, the thing sounds great, and after 1,000 Miles my mpg have increased from 21.6 to 22.8.My only complaint is that there is no lip on the adapter that connects the filter receptor that goes through the heat shield to the metal pipe that goes to the throttle body. This means that no matter how hard I crank down on the pressure fitting that attaches the filter, vibration eventually takes it back off. I 'fixed' this by putting a screw in the base of the filter holding it to the adapter. I would say for the price this is still 5 stars, but I hate the idea of having a screw in the rim of the filter/adapter that in a worst case scenario could get sucked into the engine.
Jesus Gonzalez
2025-02-11 12:02:11
funciona muy bien, solamente que el tubo de aluminio se calienta excesivamente, y hace que el aire de entrada al motor entre a casi 75°C. cosa que con los de plastico no pasa. tendre que ponerle una cinta termica para que no se caliente tanto. de ahi en fuera todo funciona muy bien. el sonido cambio muchisimo! (y)