Your cart is empty.
Your cart is empty.Spectre’s Air Cleaner Riser Kit fits air cleaner and carburetor combinations with 5 1/8 inch diameter necks and was designed to space air cleaners above chokes, linkages, and more. This kit includes 3 riser rings measuring 1/2 inch, 1 inch, and 1 1/2 inch and can be stacked for increased heights. Manufactured using high quality materials this product is engineered for optimum fit and function.
Eric
September 4, 2025
Fit, my Edelbrock curb just fine.
Baronva
August 29, 2025
Liked quality of the materials. Blades were sharp and delivered clean/keen cuts. Perfect fit and cost effective.
Nguyen Tran
August 28, 2025
Needed the smallest riser. It lifted the air cleaner assembly just enough to clear the hood.
Jeff Morrissey
August 16, 2025
Worked perfect to raise the aftermarket air filter on my1974 454 with a quadrajet carburetor. Now the accelerator pump no longer hits. Used just the 1/4" spacer. I bought a longer stud to hold the airfilter on. Stock one was going to be too short.
Teri
July 10, 2025
used them on 2 cars
Mike
June 24, 2025
This was just what I needed to lift the air cleaner up a bit to clear the fuel line on my AVS2.
hi
May 30, 2025
For someone looking to install in efforts to mock up an engine this would suffice. I would not trust the flimsiness of the product. This was for a dirt track truck. With the bouncing and jarring I do not see it staying in place. With the frequency of installing and removing, I do not think it will hold up. It served the purpose of setting up the air filter to confirm the height of aluminum spacer I need to use. Not sure I would trust it even on a street vehicle.
bejong2
May 12, 2025
Great if you have a low-profile air cleaner assembly. Allows to not sit on the fuel feed line if it is on top of the carb. And can be adjusted to not interfere with the closure of the hood.
Humberto zapata
April 23, 2025
Justo en tiempo lo requiero para usar un filtro Edelbrock 1221 a mi camioneta Silverado 1995 sistema TBI
Adam Meagher
March 22, 2025
My new air cleaner wouldn't clear the distributor on my 89 4.3l tbi motor. I ordered these and the 1 inch riser worked perfect. Fit the factory tbi and the aftermarket breather very well. 1 riser was broken, im assuming during shipping, I didn't contact the seller as I didn't need it but that was the only downfall to this product
68bird
March 21, 2025
Three rings of different sizes so that you can adjust to clear what ever is interfering with air cleaner. In my case it was the electric choke on an edelbrock carb. Problem solved.
oziel
February 20, 2025
muy bien, cumple con su funcion, lo mejor es que tienes la posibilidad de usar diferentes alturas dependiendo de tu necesidad gracias a las combinaciones que se pueden lograr con los anillos
Bernie
December 18, 2024
worked well and difft sizes to work with
Recommended Products
