Your cart is empty.
Your cart is empty.Spectre’s high-performance replacement air filters are engineered to provide increased airflow—one of the most important elements of engine performance. Manufactured using high-quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is pre-oiled and ready to use, and can be easily installed with no special tools required.
Joey
2025-09-05 12:27:05
Can’t beat this filter for the price. Easy of course to install. Good quality as well.
Jules
2025-09-02 09:20:26
Can't say for sure on actual performance but everything else was great as far as fitment etc.
Bedeski
2025-08-10 10:41:38
Works as intended. Solid construction and fits perfectly on 3in CAI tube.
Joe
2025-07-26 16:13:35
Good replacement for a beat up old KN filterPrice was much better and quality is good not like the chinese junk that let all kinda debris in your intake
Dbon82
2025-07-19 20:39:28
So I did an unconventional installation for this filter. I didn't buy it to make my old car faster, but because the original filter box was USD $270.00. I left the resonators on to silent the filter and just installed it exactly where the original filter box used to be. What you need to know is that it will not fit a 3 inch pipe (metal or plastic) from the same brand (spectre) those pipes are a little wider and this filters are made of rubber , not from stretchy silicon. What I did was to insert the rubber part in hot water for 10 seconds (it is really that fast) and then attached it to the 90 degree tube, it sealed perfectly! I was surprised of how easy it was, then put a clamp on it (4 inches clamp) to secure it. I then attached it to the tube where the airflow mass sensor is located in my car, and the filter rests infront of the front wheel behind the mudguards , it is protected from dirt in there, and my car has a pipe that injects outside cooler air in that area of the car. that was it. No check engine lights, no problem whatsoever. It took me longer to take apart the car to install it, that the installation itself. I am sure it is much easier to attach it directly to the throttle body, but I didn't want the "racing" sound in my car and mess around with wires to extend my MAS connection.
Mark S.S.
2025-07-13 11:46:08
I had a K&N filter on my machine, someone else thought they like it better and stole it. The thing cost me close to $100 bucks. I found these filters, there almost an exact replacement. Instead if the OD being 3 inches the ID is 3. No big deal a hose clamp and I am on the road or I should say in the dirt. I place the order and had it in 2 days, great service, I am impressed, the filter is killer, how needs the chrome ring I had on the one that was stolen. Killer design, made strong, looks great. MSS
Dan R.
2025-06-29 17:50:44
Purchased my 2007 Jeep Wrangler with a Spectre Cold Air Intake already installed. The filter on it was old, not maintained and disgusting. I purchased this one to replace the filter and the fitment was exact. Took 5 mins to replace. Overall my mpg went from 14.5 mpg to 16.1 driving the same routes at the same speed. More pickup with the vehicle as well. Very great upgrade for the price!
Sam
2025-06-23 13:16:00
Great filter, pre oiled and ready to install. Amazing quality on the 3†ID (inner diameter). Fits like a glow. Does not come with a screw tie but any 4†will do. I installed this filter on a 1500cc fuel injected motorcycle and the performance improvement are impressive. I use a Dynojet Commander and I set it up as “Cold air intakeâ€. Highly recommended.
Jules97
2025-06-16 17:13:18
The product is exactly as described, works well, and sounds quite nice!
luckyval9
2025-06-10 16:45:10
As described !
Brett H
2025-06-07 17:50:14
Installed yesterday. Easy to install, fit well on the Injen SP3078BLK intake in my VW. No issues!
Joey
2025-05-09 13:38:08
Can’t beat this filter for the price. Easy of course to install. Good quality as well.
Jules
2025-04-25 10:11:24
Can't say for sure on actual performance but everything else was great as far as fitment etc.
Bedeski
2025-04-10 14:10:32
Works as intended. Solid construction and fits perfectly on 3in CAI tube.
Joe
2025-03-26 11:01:49
Good replacement for a beat up old KN filterPrice was much better and quality is good not like the chinese junk that let all kinda debris in your intake
Dbon82
2025-03-25 15:08:23
So I did an unconventional installation for this filter. I didn't buy it to make my old car faster, but because the original filter box was USD $270.00. I left the resonators on to silent the filter and just installed it exactly where the original filter box used to be. What you need to know is that it will not fit a 3 inch pipe (metal or plastic) from the same brand (spectre) those pipes are a little wider and this filters are made of rubber , not from stretchy silicon. What I did was to insert the rubber part in hot water for 10 seconds (it is really that fast) and then attached it to the 90 degree tube, it sealed perfectly! I was surprised of how easy it was, then put a clamp on it (4 inches clamp) to secure it. I then attached it to the tube where the airflow mass sensor is located in my car, and the filter rests infront of the front wheel behind the mudguards , it is protected from dirt in there, and my car has a pipe that injects outside cooler air in that area of the car. that was it. No check engine lights, no problem whatsoever. It took me longer to take apart the car to install it, that the installation itself. I am sure it is much easier to attach it directly to the throttle body, but I didn't want the "racing" sound in my car and mess around with wires to extend my MAS connection.
Mark S.S.
2025-03-21 17:37:27
I had a K&N filter on my machine, someone else thought they like it better and stole it. The thing cost me close to $100 bucks. I found these filters, there almost an exact replacement. Instead if the OD being 3 inches the ID is 3. No big deal a hose clamp and I am on the road or I should say in the dirt. I place the order and had it in 2 days, great service, I am impressed, the filter is killer, how needs the chrome ring I had on the one that was stolen. Killer design, made strong, looks great. MSS
Dan R.
2025-03-18 13:43:00
Purchased my 2007 Jeep Wrangler with a Spectre Cold Air Intake already installed. The filter on it was old, not maintained and disgusting. I purchased this one to replace the filter and the fitment was exact. Took 5 mins to replace. Overall my mpg went from 14.5 mpg to 16.1 driving the same routes at the same speed. More pickup with the vehicle as well. Very great upgrade for the price!
Sam
2025-02-26 16:06:51
Great filter, pre oiled and ready to install. Amazing quality on the 3†ID (inner diameter). Fits like a glow. Does not come with a screw tie but any 4†will do. I installed this filter on a 1500cc fuel injected motorcycle and the performance improvement are impressive. I use a Dynojet Commander and I set it up as “Cold air intakeâ€. Highly recommended.
Jules97
2025-02-15 18:13:35
The product is exactly as described, works well, and sounds quite nice!
luckyval9
2025-02-14 17:16:55
As described !
Brett H
2025-02-06 10:53:06
Installed yesterday. Easy to install, fit well on the Injen SP3078BLK intake in my VW. No issues!
Tom Chenard
2025-01-29 18:15:08
Great fit on bike
13
2024-12-27 14:30:14
Works good on my mk4 2.0, nice deep sound and improved mileage slightly.Update- buy bigger filter with open end. Mesh around outter filter s*** the bed. Buy k&n
Tom Chenard
2024-12-16 10:37:33
Great fit on bike
13
2024-12-14 16:43:26
Works good on my mk4 2.0, nice deep sound and improved mileage slightly.Update- buy bigger filter with open end. Mesh around outter filter s*** the bed. Buy k&n
Recommended Products
