Your cart is empty.
Your cart is empty.
Solid Carbide Spiral Router Bit with 1/8 inch Shank and 1/8 inch Cutting Diameter, 1/2 inch Cutting Length, 1-1/2 inch for Total Length;
Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated;
For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc;
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/8" Collet;
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/8" Collet;
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.;
drew
2025-09-07 13:31:25
Had some cheap carbide bits, changed them out for these, cuts like butter leaving crisp 90° with a smooth finish.
Amp Pope
2025-09-06 20:29:06
Works with no hitches.
Customer
2025-07-30 17:24:49
These 1/8" as well as spe tool .25 inch endmills are under sized. I added a SPE 1/8" cutter to the data base so CAD can accurately account for the thickness. I like that I can squeeze a little more depth if I need it. Something you can't do with a 1/4" shank on an 1/8" cutter.
freqfas
2025-07-17 18:23:09
Hard to tell from the photo, but the cut was clean with minimal visible tool marks on the bottom or sides when cutting 6061. This was the primary reason for purchasing, so I'm satisfied.For what it's worth though, tried to use one to cut acrylic. While it did cut, I had to pause the job multiple times to snip off excess material from the tip of the endmill. Probably better to stick with cutting metal using these.
Roger Koeger
2025-06-26 15:29:17
I don’t run these in a CNC. I run them in a Bridgeport & they run fine. I run them at 3,000 rpm & they do what I need them to machine.
Faith
2025-06-12 13:46:00
I was hoping to find a less expensive 1/8 2fl carbide endmill than what I currently use to cut 1/8" and 3/16" brass. Unfortunately this ain't it. I couldn't find a speed and feed (including very slow for a test) this cutter was happy with. These endmills busting within the flute which is unusual. I don't want to give them a one star because I'm sure they're fine for plastic, wood, maybe aluminum.
Chris
2025-06-07 13:28:09
Very sharp bits. I had been using another brand of bit that is much cheaper and had no idea what I was missing. Very sharp bits. Had to look twice because of the noise reduction when I used the first one. I thought it broke, it was just so much sharper than the bits I had been using.
JBM3M
2025-06-01 14:47:40
These do not break very easily and produce a nice finish.
Handy Dude.
2025-02-04 12:18:54
No need to buy the expensive Amana bits when you can get these and then you won't cry if you break one. So far they have stayed nice and sharp. Nice packaging too.
ww
2025-01-06 12:30:42
For the price, these seem pretty good. Still using the first of 5 cutters.
J
2024-12-31 12:10:44
I picked these up alongside my 3018 CNC for milling carbon fiber sheets. These endmills have been really solid! None of these have snapped, they cut like butter, and they're holding up really well.
Bruce Forbes
2024-12-09 10:00:39
Works well
M. Frederick
2024-12-07 14:22:32
Amazing tools for the price, precise and sharp, for the price, amazing.
Recommended Products
$22.99
$ 9 .99 $9.99