Your cart is empty.
Your cart is empty.Product Description
Sporacingrts
Our company was established in 2011,,We are committed to providing convenient, high-quality and efficient cross-border e-commerce services for global consumers.
Product Size
10 mx 5 cm
Scope of application:
It can be used in panel, firewall, sealed air box, wrapped wire, cable, fuel pipe, hood, hose, door, partition, also suitable for car parts, home repair, computer repair, etc.
BLUEwarrior333
2025-08-29 19:15:48
used this to get heat away from my ECM in my engine bay (its ON the head) so i made a spacer with this and Bakelite, wrapped the Bakelite on this tape and now my ECM could practically hold ice! this reflects heat very well! so i imagine for wrapping applications like intakes or other engine bay spots this would be such a great option to consider! this is alot of tape for a cheap price AND its good? worth every penny! definitely will be buying again in the future!
Gage Morton
2025-08-21 13:10:25
The size of the roll you get is totally worth the money, depending on what you’re installing it on.. it’s super easy to cut 1â€â€”3†pieces and apply with a slight overlap. Works well to keep temperatures down and is also pretty thick and durable.
Allen E Crews Jr
2025-08-11 21:03:21
I installed this on a 2006 Chevy Malibu SS with a 3.9 l. The throttle body is on the driver side, and the air intake is on the passenger side, so there's an intake tube that needs to run all the way across the engine to the throttle body. With the intake tube being made out of plastic, it's just sucking up all the heat from the engine. It's noticeable when you're in stop and go traffic, and then the traffic clears up and you can drive, it just feels sluggish sometimes. After installing this, the car just feels like it has more pep, it feels like you're driving with a cooler running engine. It sticks okay, you want to make sure whatever you're putting it on you clean it thoroughly. I clean the intake tube with rubbing alcohol twice, just to make sure there was no residue left from the dressing I use on the plastics under the hood. And to determine how much I needed, I taped one end to the start point and then wrapped it without removing the paper all the way around the pipe as far as I wanted to go added a few more inches and then cut it. It just makes it easier to deal with instead of trying to deal with the entire role. The adhesive could be a tad bit better I believe, it is sticking, there were a spot here and there where it was coming up, I just use some clear Scotch tape, and that held it down. There's a couple flexible areas in the intake tube, I wrapped around those also, it's just a little loose so it can still move around. And this is supposed to be good all the way up to 350° c or 662° f. I wish the tape would lay down better, and look a little bit smoother, but it's doing the job I needed it to.
M D
2025-08-04 18:37:59
The tape is strong, easy to conform to surfaces, and looks good installed in the car. Thumbs up!
Hector quintana
2025-06-03 14:14:25
Buena calidad facil de usar
E
2025-05-26 12:41:03
Like they always say you get what you paid for, adhesive was very cheap and didn’t stick on to the components very well, recommend getting the ones that cost 80$ at autozone
iJ1469
2025-05-11 11:21:59
Very easy to handle and work with. The adhesive is very sticky so you know it’ll stay. Worth the money in my opinion helped with heat soak in my case
James E Lynch
2025-04-30 20:50:21
Looked great at first but after just a short while, they started to peel up. Bummer
Enjoylife
2024-11-19 15:31:11
Great fun to use. But the edges of the tape lifted up from piping and tubing after spirited driving, most likely from heat. I used aluminium tape to wrap over the gold tape.I did some rudimentary testing on aluminium piping with a temperature probe against the inner pipe wall with no layer, 1 layer and 2 layers of this tape applied to the outside pipe wall. Hot air source: Bosch heat gun set to 100 degrees centigrade for 4minutes, at same distance from pipe. Piping was allowed to cool to ambient (approximately 22.8 to 25 degrees centigrade) after each test. With no layer, it took 52 seconds to reach 60oC with 67.3oC @ 4minutes. With 1 layer, it took 65 seconds to reach 60oC with 65.1oC @ 4min. With 2 layers, it took 120 seconds to reach 60oC with 60.7oC @ 4min.Personal ‘guesstimation’ -As mentioned by another reviewer, this product likely increases the time it takes for whatever you are wrapping to heat up from surrounding heat sources, and possibly reduces the plateau/equilibrium temperature that the wrapped object might reach during operation. As per rudimentary test, more layers are better but law of diminishing returns apply; it’s up to you to work out the optimal number of layers in consideration of time, effort, weight, material costs and other relevant constraints for your purpose.Most likely unsuitable as a substitute for proper exhaust wraps designed for direct application to exhaust manifolds, turbocharger turbine housings or wastegate outlets, unless ‘living on the edge’ is your life motto.Edit: added a bit more text and increased my rating as it’s held up despite the beating it received under the car’s bonnet during a drive on a hot >35oC day we’ve just had. Great value for money.
danai h.
2024-11-17 18:40:21
bought a few rolls and covered my engine bay with it, as installed a turbo and wanted to keep my original paint safe.
Recommended Products
$34.99
$ 16 .99 $16.99