Your cart is empty.
Your cart is empty. **Verify the part fits before purchasing**
Specs:
Description: Scraper Bar
ID: 1/2"
Length: 26"
Thickness: 1/8"
Width: 2 1/4"
Notes: 4 mounting holes, Verify OEM part number by referring to engine model and spec - does not fit all applications
Replaces OEM Numbers:
Cub Cadet: 753-0626, 753C0628, 784-5579, 784-5579A, 784-5579A-0637, 790-00121, 790-00121-0637
MTD: 753-0626, 784-5579, 784-5579-0638, 784-5579-0692, 784-5579A-0629, 784-5579A-0637, 784-5579A-0667, 784-5579A-0691, 790-00121, 790-00121-0637, 790-00121-5083, OEM-784-5579, OEM784-5579, OEM-784-5579A, OEM784-5579A
Compatible With/Replacement For:
MTD 26" two-stage snowblowers, 1992 and newer
JD V
September 4, 2025
Bolted right on, no issues.
Stanley Peterson
September 2, 2025
perfect fit. quick delivery.
Timothy Y.
August 30, 2025
Does not fit Home Depot Yard Force YF26-DS21-GSB. I ordered hoping it would, but it is totally different. My fault not the seller's fault.
Mike H.
August 27, 2025
Fit as it should most work is getting old one off. Don't forget to buy bolts nuts washers and skids
br1ght
August 22, 2025
Great on pavement but very different but I can’t get it dialed in for gravel. The original was a piece of cake to dial in, this one I can’t get dialed in as well as the factory…
Robert Rogers
August 5, 2025
Built good and heavy, I'll tell more people that's the best to get
Bootsy Cox
August 3, 2025
Scraper bar fit great just wish hardware came included as the bolts are usually ground off when needed to be replaced!
Eric S.
July 18, 2025
I NEEDED a new shave plate for my snowblower. This one was cheaper than form the manufacturer, and it made blowing my driveway and fence line easier. Maybe I'll get 25 years out of it like the previous owner did out of the old one....
Brad noland
July 14, 2025
Was worried this product would be flimsy like tinfoil after reading other reviews. I received the product and compared it to my original piece. It weighed more than my original one which was worn down telling me it was close to oem thickness and it also fit perfect. 10/10 would recommend.
Customer
June 30, 2025
Works great
Customer
June 2, 2025
Very satisfied as ordered
Frugl Consumer
May 20, 2025
Item Thickness not as described, Bar thickness not 1/8†thick, only 3/32†or exactly 2.5 mm thick. Made in China. Mind you the OEM replacement part no longer the original thickness of 5/16†or 3.9 mm thick. See Pictures. Decided to purchase this part because it was advertised as 1/8†thickness. Even the sticker on part fails to mention thickness of part, just the length & width. All other dimensions & hole placement same as OEM.Have found that the Thinner scraper bars results in much faster wear on the scraper bar and especially the slide shoes!
Richard
April 26, 2025
It’s as described. Dimensions are perfectHowever, it’s quite flimsy.
JD V
April 21, 2025
Bolted right on, no issues.
Stanley Peterson
April 20, 2025
perfect fit. quick delivery.
Timothy Y.
April 17, 2025
Does not fit Home Depot Yard Force YF26-DS21-GSB. I ordered hoping it would, but it is totally different. My fault not the seller's fault.
Mike H.
April 9, 2025
Fit as it should most work is getting old one off. Don't forget to buy bolts nuts washers and skids
br1ght
April 9, 2025
Great on pavement but very different but I can’t get it dialed in for gravel. The original was a piece of cake to dial in, this one I can’t get dialed in as well as the factory…
Robert Rogers
March 15, 2025
Built good and heavy, I'll tell more people that's the best to get
Bootsy Cox
March 12, 2025
Scraper bar fit great just wish hardware came included as the bolts are usually ground off when needed to be replaced!
Eric S.
February 12, 2025
I NEEDED a new shave plate for my snowblower. This one was cheaper than form the manufacturer, and it made blowing my driveway and fence line easier. Maybe I'll get 25 years out of it like the previous owner did out of the old one....
Brad noland
February 10, 2025
Was worried this product would be flimsy like tinfoil after reading other reviews. I received the product and compared it to my original piece. It weighed more than my original one which was worn down telling me it was close to oem thickness and it also fit perfect. 10/10 would recommend.
Customer
February 8, 2025
Works great
Customer
February 6, 2025
Very satisfied as ordered
Frugl Consumer
January 24, 2025
Item Thickness not as described, Bar thickness not 1/8†thick, only 3/32†or exactly 2.5 mm thick. Made in China. Mind you the OEM replacement part no longer the original thickness of 5/16†or 3.9 mm thick. See Pictures. Decided to purchase this part because it was advertised as 1/8†thickness. Even the sticker on part fails to mention thickness of part, just the length & width. All other dimensions & hole placement same as OEM.Have found that the Thinner scraper bars results in much faster wear on the scraper bar and especially the slide shoes!
Richard
January 18, 2025
It’s as described. Dimensions are perfectHowever, it’s quite flimsy.
Recommended Products
$30.99
$ 13 .99 $13.99