K. Monteith
2025-08-28 18:41:31
This scraper is a perfectly fitting replacement for the OEM scraper on my Honda snowblower. I wore out my previous scraper (also new) after a weekend of 8" snows where I cleaned my and my neighbors' driveway four times, and two other neighbors once. I've already used the snowblower with the new scraper and it works perfectly. It fit perfectly on the snowblower, taking only 10 minutes to install.
whitejww
2025-08-23 12:21:23
This is the second one I have used on my Honda HS621. It is of excellent quality and a perfect fit. It was well priced. It was the exact part I replaced and the first one lasted many years. It is a wear item and depending on your walk or driveway surface it will last at least as long as the OEM part.
Dan Fleming
2025-08-18 15:35:54
Fit like OE and appears to be high quality.
Customer
2025-08-09 12:58:49
Perfect fit easy to adjust positions
Scott Wilson
2025-07-24 12:16:29
It was relatively easy to install. Make sure when you’re taking off the old one that you check which way the square washer is setting. It has either none, 1, 2, or 3 holes on a side and that tells you the height of the scraper. 3 is the lowest and then goes higher from there. I’ve purchased this before and it lasts a few years and then has to be replaced. I thought it was a pretty good deal.
William J
2025-07-15 16:23:01
It installed easily and fit well on my Honda HS621. Seemed like a direct replacement for the factory original. No more just scraping by, this replacement helps my snowblower perform better once again. Listing states a plastic scraper bar, which is what I received.
David
2025-07-10 10:57:34
This was just what I needed for my worn-out edge on the snow blower. I should have ordered the bolts. I had to go to the hardware store to replace one of the old ones that didn't come off so well.
Dan Z
2025-06-17 11:02:54
Fit and works great
RH
2025-06-12 18:59:59
The blade seems very solid and well made. For some reason it couldn't be adjusted to function properly on my snowblower. The vendor's response was very fast and the issue got resolved to my satisfaction.
Customer
2025-05-31 16:57:55
Received new scraper bar & installed easily after removing old bar!
Tony
2025-05-12 16:12:09
The product is good. Thick and solid. All holes line up with the original. However, Canada Post gave the parcel to my neighbor. Luckily I saw it while working on the driveway. Now I really wish Amazon let me choose NOT to use Canada Post as carrier in the future.
Awesomeo
2025-03-04 16:27:48
One massive snow clearing and it works ao far. Modified it for a Honda hs35.Since Honda does not make the scrapper bar for the hs35 I have resorted to modding.The length of the bar matches up for a hs35. It does not have the extra bit for the side mounts of a hs35. But with the center two bolts and drilling some new holes to line up for the hs35 I am up and running again.So it is a work around for hs35 owners out there if you are a little handy.
COCO
2025-01-22 17:53:09
Works great on my older Honda hs35. I just need to make one new holes in order to fit