Your cart is empty.
Your cart is empty. This hybrid bipolar Nema 14 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 0.4 A at 12 V, allowing for a holding torque of 14Ncm(20oz.in).
Electrical Specification:
* Manufacturer Part Number: 14HS10-0404S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 14Ncm(20oz.in)
* Rated Current/phase: 0.4A
* Phase Resistance: 30ohms
* Inductance: 30mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 35 x 35mm
* Body Length: 26mm
* Shaft Diameter: 5mm
* Shaft Length: 20.5mm
* D-cut Length: 16.5mm
* Number of Leads: 4
* Lead Length: 400mm
* Weight: 140g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
James J. Collom
July 18, 2025
I used this in my ERCF V2, and had great results with it. The stepper fit perfectly and performed really well. Recommend this for anyone needing a stepper for ERCF V2..
R. N. Shagam
June 21, 2025
Usual fine quality Nema 14 motor. It moves on command, just like it should!
Trung
April 25, 2025
Great motor. Used in my toranado extruder. Runs alittle hot so i printed a cool fan.
L4Soft
April 3, 2025
I bought this motor to drive a geared extruder on my 3D printer. It works great. The previous motor tended to overheat but this one remains cool even after several hours of printing.
RT
March 31, 2025
Works perfectly for the Toranado geared 3D extruder. Shaft is slightly shorter so when mounting the pinion gear have it flush with the end of the shaft.
A1cPeanut
March 26, 2025
Works great with my geared down extruder!
Salvatore Costanzo
March 4, 2025
Great product
ernesto ortiz
December 27, 2024
good
Gazza
November 27, 2024
This has to be the most well packaged item I have ever received from China and the stepper motor is robust but light.
Recommended Products
$79.99
$ 31 .99 $31.99