Your cart is empty.
Your cart is empty.Product Description
What is Included？
- 2 x Strut spring compressor tools
- 1 x Heavy duty plastic blow molded carrying case
Safety Assured
- Made of high hardness carbon steel and built with heavy duty forged structure for high strength and superior durability.
- Built-In pins lock the coil spring in place still to prevent slippage for safe compression of the springs.
- Heavy duty screw heads and puller hooks have broad contact with springs for safe operation.
KOOPOOL Strut Spring Compressor Tool Set 2 PCS
Fit Variety of Macpherson Strut Springs
- 11.5-inches threaded rods allows 10-inches to 10.5-inches maximum opening for coil springs of different length.
- This tool set can be used with hand or power tool and the hex-shaped end can be used with 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment.
- The threaded rods of 11.5'' length are long enough to compress springs safely without removing springs from your cars.
Warm Tips:
- Always use both strut spring compressors on the same spring, at the same time
William Berg
August 9, 2025
Worked wellThanks
Eric B. from Newton
August 8, 2025
I used these to compress the springs on a strut that had a bad mount. Having never used a spring compressor before, at first I treated these gingerly and cranked each side down just a bit at a time using a ratchet. Eventually I got a feel for how they worked and felt more comfortable cranking them down about 1/2 inch each side. I made sure to oil the threads and the compressors showed no signs of strain or wear even after I had to release and recompress the springs three times for this particular job. Other details: The tops of the compression screws can be cranked using a 1/2" square drive or a 22mm socket or wrench. I also found that a 7/8" wrench worked well. The retaining pins are a nice feature and helped to make the operation of compressing the springs feel a little safer. Overall these seem like a well made product that come in a nice red storage case. Recommended.
Phönix
June 30, 2025
I am taking away 1 star because my Audi spring was 16mm and the safety pin wouldn't close and I was scared to use it. This tool is made for 14mm or smaller springs.
Jacqueline
May 29, 2025
As of right now I've used it only one time and it did the job. It is good quality.
Harold lameh
March 3, 2025
It did the job very well
Luis Alfredo Jiménez barboza
January 22, 2025
Funciona bien
Customer
December 25, 2024
Not the best design for grabbing on to the spring. Kind of a sketchy hold.
Juan m Ramos
November 24, 2024
good for regular people not for daily use
Recommended Products