Your cart is empty.
Your cart is empty.Laila V Oswald
2025-08-23 11:39:54
Very impressed with this stabilizer. It ships with a strong tube for storage - please be sure to store the bar itself in the tube. Note that this does absolutely appear to be high modulus carbon fiber - as such, it is very stiff, but it will not like any form of impact damage. That's just physics - the reduction in deformability does come at the cost of overall tensile strength, and carbon fiber just does not do well with point impact damage, no matter what. The rubber portion of the weighted end is somewhat stiff but does respond to axial and lateral deformation, so it will serve well to moderate forces transmitted to the weights. The weights themselves are quite heavy for their size - I'm assuming they are lead, judging by their density. So, of course, do keep those away from children, as we all know how toxic lead is. I ended up ordering the longest length - 15 inches - and I'm very glad I did. The moment of inertia for this stabilizer appears to be very high, as increased of course by the distance from the source of kinetic energy (I.e., the bow moving as your hand moves) and so I expect the dampening effects of this stabilizer to be significant. Now, it does add weight overall, so if you don't have a strong bow arm, you might find the extra mass to be tiring to hold for long periods. But that, again, is physics - placing weight far away from the prior center of mass of the bow will make it harder to hold. However the inertial dampening effects are worth the strain, in my opinion. I can absolutely guarantee that small quivers and shakes from your bow holding arm will be reduced significantly - again, the joy of physics at play. Construction of this stabilizer is excellent, and the product quality is par excellence. Very impressed - absolutely worth the cost. Note that the set screw for the weights, if it is fully sunk into the rubber dampener, will not fully run through the threads of the second weight - this is not an issue, IMHO, as it does run through a little more than half of the second weight, if the plastic washer between the weights is removed, and that is sufficient, assuming you torque down the weights by hand after the set screw is fully tightened into the dampener. I debated on the best configuration for that set screw, and settled on fully tightening it into the damper, to ensure it makes full contact with the damper, even if the second weight is not fully on-spindle with the set screw. With sufficient torque by hand, I have no reason to think the weights will loosen. For the field, this stabilizer at 15 inches might be unwieldy, but YMMV. For the range, it's absolutely excellent.
Mike Scheirer
2025-08-22 12:55:23
Never had a stabilizer qd but this works great. I wanted to be able to quickly remove the stabilizer to case my bow. This works great.
B. Yuen
2025-08-05 17:16:27
Well made. It allows me to add a longer weight and still meet the 12.2 cm circle for bare bow.
lawrence knott
2025-07-21 09:12:06
Works as advertised would definitely buy again
Fire reel
2025-07-19 17:41:04
I have this quick disconnect adaptor on my Bear species EV and I could immediately tell the difference in stabilization!! It helps me increase time on target liner which creates tighter groupings!! It worked so much so that I put one on my wife’s bow, a Bear adapt… She even stated that she could experienced a noticeable difference as well!! Overall great product and I would recommend!!
That parts guy
2025-05-16 09:50:27
Picked up the adapter to build my own stabilizer system using threaded rod some washers and a couple of nuts. So far as of 10/2024 it’s still holding up perfectly once you tighten the adjustments down they don’t move even after bumping them through the brush with the stabilizer hitting everything also pretty damn easy to disconnect the rods at the end of the day. They don’t have any negative affects on noise or vibrations. Covered it in silencing tape to cover the gloss finish
Jen Douglas
2025-04-24 14:53:38
Very impressive with quality and the price point. Make sure review review pictures regarding overall length. I didn't not. The carbon bar was 10 inches. Dampener and weight addition 3 inches. This information was provided in the additional picture. Mistake was my fault.
Craig Chamblee
2025-03-10 11:04:41
1st it got lost in the usps mail..So I requested a replacement well the 1st one finally came only to find parts missing...the 2nd one was also delivered same day and both had missing pieces...I'm sending both back.. I would've recommended this part...but you decided for yourselfCraig
Annonyhmer
2025-02-14 14:04:17
Der Stabi macht einen sehr wertigen Eindruck. Alles ist sauber verarbeitet und die Dämpfer Wirkung ist recht gut. Allerdings ist er im Vergleich zu Avalon recht teuer.
Wesley Semrok
2025-01-17 15:40:35
Reasonably good stabilizer. Wish it was a bit more adjustable, but otherwise good for the price.
Kindle Customer
2024-12-30 10:54:04
It is what it says it is!
Salvo
2024-12-24 16:03:26
è un peso su un asta, la vendono così, è possibile mettere e rimuovere i dischi, il terminale è un dumper che aiuta a ridurre le vibrazioni, fa tutto quello che deve e quello che fanno i compari più costosi, la qualità è ottima, minimalista me è così che deve essere.lo consiglio vivamente
Gustavo
2024-12-23 14:43:31
Buena calidad
Recommended Products