Your cart is empty.
Your cart is empty.Product Description
Superior Tool Spare Blades (10) For Mini Hacksaw,Gray
From the Manufacturer
Spare blades for mini hacksaw - 10 blades per pack.
Mike B.
2025-08-24 11:52:48
Been using the saw that accepts these blades for years. They work well cut just about anything and you can be precise with them. Good quality good price highly recommended
T. Hill
2025-08-23 13:56:28
After many years of reliable service, the blade broke on my trusty mini handsaw. Being a vintage tool, I was certain we’d worked our last project together. I was delighted to discover exact replacement blades and my trusty tool and I are back to the cutting board. So happy. Thank you.
Aura Perez
2025-08-16 13:43:54
Good quality for the price
H. Bustani
2025-07-29 16:53:41
I tried three brands of 32 TPI 6" mini-hacksaw blades, for my BrassCraft T114 Close Quarters Hacksaw:1. Eclipse 71-132R Carbon Spring Steel Junior Hacksaw Blades (10 pack) $0.72 each blade Blade thickness is 0.017 inches. The pins on the Eclipse blades were too thick, so I could not install them on my hacksaw. Holding the blade in my hand, it does cut the Stainless Steel which is used for Stainless Phillips screws sold at Home Depot.2. Superior Tools Spare Blades (10) for Mini Hacksaw $0.56 each blade Blade thickness is 0.019 inches. Works well, does cut the Stainless Steel which is used for Stainless Phillips screws sold at Home Depot.3. Zona 36-657 Mini/Junior Hack Saw Blades (3) $2.20 each blade Blade thickness is 0.016 inches. Works well, does cut the Stainless Steel which is used for Stainless Phillips screws sold at Home Depot.All three of these blades have a wavy pattern along the length of the blade, unlike the original BrassCraft blade. This means they cannot cut as narrow a slot.One conclusion from the above data is that the thinner blades cost more. (The original BrassCraft blade was 0.016 inch in thickness.)
Matthew Sankey
2025-07-10 17:12:55
I like how small theses are
Kenneth Dixon
2025-06-28 14:58:00
I’m a plumber so I use these a lot. They last a good while so I recommend them
Charles Tadros
2025-06-22 11:25:04
For sawing in those tight spaces. This, and several other tools, were presents for my newly wed daughter and son-in-law, when they purchased their new home. Happy homeownership!
Gary
2025-03-13 15:14:41
These hacksaw blades are junk. Do not buy. Every blade end was bent or twisted. The cross pins were all bent or crooked. Two of ten could not be straightened. The rest I had to straighten with pliers. Not one was able to fit on to the saw frame right out of the pack. My first use was to cut through a 1 1/2 inch piece of plastic tubing. by the time I cut through the plastic tubing all the middle teeth were dull.
Matt
2024-11-28 17:28:19
Â
Recommended Products
$20.92
$ 9 .99 $9.99