Your cart is empty.
Your cart is empty.
Features:
This surface resistance tester, high-precision digital display with backlight, suitable for measuring the surface resistance of the material, anti-static measurement, measure the insulation material.
Surface resistance tester is widely used in microelectronics, pharmaceutical, aerospace, precision machinery, and other fields. Used to quantify the measurement of all conductive, surface resistivity or resistance antistatic systems and ESD material, simple to use, easy to carry.
Large-screen liquid crystal display
Specifications
With backlight function
Ambient temperature display and compensation
Symbol and unit display for easy reading
Low voltage display
Automatic shut-down
Measurement tally
Static grounding system measurement
Measuring range: 1000Ω-1000GΩ
Accuracy: ± 10%
Temperature measurement: 0-50C (32-122F)
Repeatability: Resistance ± 5%; temperature ± 2C( ±3.6F)
Operating temperature: 0-40C (32-104F); Humidity 0 to 70%
The reaction rate: Power: 9V 6F22 Battery * 1 (NOT included)
Product size: 126 * 64 * 31mm
Product Weight: about 125g
Packing: Blister
Package content:
1 * Surface Resistance Meter
1 * Ground Lead
1 * User Manual (English)
JW
2025-08-07 10:51:14
Going in, I had somewhat low expectations from an instrument at this low price point. However, after testing it out on surfaces with known values, the surface resistance meter appears to work perfectly and is accurate right out of the package.
Customer
2025-06-09 10:31:04
Product seems to work -- contacting a metal surface, shows 10^3 ohm / conductive (the lowest resistance value it can show). Contacting most surfaces either shows 0 or "insulative". Anti-static bags show 10^10 or 10^11 "dissipative". An anti-static work mat showed 10^5 "conductive". Some types of painted surfaces showed 10^9 - 10^11 "dissipative" while other types were insulative.So it certainly seems to appropriately show a range of values that appear reasonable for the types of surfaces I'm testing. I don't have another meter to compare it to for accuracy purposes, so I can't say for certain the readings are fully accurate (maybe it is?). Either way, it appears to do what it's meant for. For $30 I can't ask more than that.
david lissner
2025-06-01 17:53:14
It works well
Eric P
2025-05-09 10:41:32
Works as expected to meet the measurements requirments
A
2025-04-09 20:10:57
Upon making initial contact with most surfaces, value jumps between 10e10 and 10e12 before showing an open circuit. This happens even for materials that have a much lower resistance. The only exception is bare metal with near-zero resistance, which shows 10e3. Effectively useless. Calibration doesn’t improve the results.
BK
2024-11-28 09:54:29
Wanted to be able to compare and test my "ESD" mats and bags.Works well enough.Found good bags, found bad bags.Found mats that are not conductive as advertised, and found others that are - as advertised.Nice inexpensive reassurance.
Recommended Products
