Your cart is empty.
Your cart is empty.Product Description
Sutekus Fuel Injection Pump Pressure Test Gauge 0-140PSI Automotive Fuel Oil Injector Tester Tool Kit
How to Use
- Remove the fuel pump and fuel injection fuses, disconnect the main wire from the coil and spark plug wires, and remove the spark plugs.
- Select the right adapter and attach it to the pressure gauge and the test port on your engine's fuel rail.
- Start your car, idle the engine and check if the gauge's reading is within the manual's specified value range.
- Turn off the engine, press the pressure relief valve to relieve pressure, let the fuel flow into the container suitable for fuel storage.
Connection Methods for Fuel Pressure Test
- 1. You can use the Tee adapter to splice inline between the fuel pump and engine for test.
- 2. Directly hook up fuel pressure test port with included accessories:
- 15" long hose is used for direct connection to the 1/4" SAE standard Schrader valve on the fuel rail or fuel pump
- M8/M10/M12/M14 adapters for the corresponding test port on fuel rail
- 8" pressure test hose for test port M6
Packing List
- 1x Pressure Gauge
- 1x 15" Long Hose with Drain Hose & 1/4" SAE Standard Schrader Connector
- 1x 8" Pressure Test Hose with M6 Connector
- 1x Tee Fittings (Aluminium tee parts 1/4" & 3/8" barbed x 1/8"-24NPT & brass parts 1/8"-27NPT x 1/4"-18NPT)
- 13x Adapters
- 1x Cut Hose (1/4" I.D. x 3-1/2"L)
- 1x Cut Hose (3/8" I.D. x 3-1/2"L)
- 2x Hose Clamps
- 1x Plastic Case
D
2025-08-13 18:19:34
measures seems precise and easy to read.
Paul C.
2025-06-28 18:01:46
I liked that the gauge is easy to read. I disliked that the hose attached to gauge was short. None of the extras helped in the matter. So.....if you have a low Schrader valve with extra lines and harnesses on top.......you wish you had the extra length. Over all......it did its job and cut down on a guessing game for me.
Dustin
2025-05-09 17:32:09
Works good
JR
2025-02-02 14:49:18
Timely fashion
Recommended Products
$19.99
$ 9 .99 $9.99