Your cart is empty.
Your cart is empty.Product Description
Sutekus Pipe Expander Tool Kit can fit a wide range of exhaust pipe sizes from 1-1/8 inch to 3-1/2 inch ID thin wall exhaust pipes, and serves an important function in straightening, spreading and repairing automotive exhaust systems.
Features
Precision Craftsmanship
Drop forged and heat treated steel construction is for maximum strength and longevity that resist to endure years of heavy use.
Long Hex Shaft
Long hex shaft is easy to go deep in the pipe and providing more torque.
Sealing O-rings
6pcs extra O-rings are included.
Easy to Use
Recommend to disassemble and grease the mandrel threads and die segments before using. Insert the beveled steel cones of the expander into the pipe, then turn it by hand with a breaker bar or hand wrench and gradually expand the pipe.
Wide Application
Our tailpipe expander tool can spread exhaust tail pipe on most vehicles and trucks. Suitable for family and professional mechanic.
It comes in a plastic storage case for easy carrying and storage.
ENF
2025-06-26 15:19:15
Was not able to expand 4" to 3" Inch Galvanized Steel Round Duct Reducer. I had a 36 inch long 1/2" driver handle with socket and even with that much leverage it could not expand the 4" end of the duct reducer.If it cannot expand steel duct it will definitely NOT expand and type of exhaust piping. This may work on thin 20+ gauge tin or 20+ gauge copper or brass but nothing that is 20 ga. of thicker steel.Do not waste your time or money. If you need to expand a 18 ga. or heavier pipe look at either a hydraulic unit or better. It will cost more but it's better than throwing away your money on this useless tool.
Stephanie Adler
2025-02-10 15:11:55
Expanded crushed aluminum pipe as needed.
Charles Larson
2025-01-25 18:01:33
The expansion bars are only made of the cast iron instead of steel.So...they shatter if placed under a load like you are trying to expandthe new thicker walled pipe that is now used. The video suggests toplace the expander toll into the pipe and progressive insert the the toola little at a time with the cast bars they will break before you are half way in.If the bars were steel this would be a great tool.
Customer
2025-01-23 16:00:26
Cheap material. Broke on first use. I would avoid this it's was to cheaply made
Recommended Products