Shopping Cart

Your cart is empty.

Your cart is empty.

TAILONZ PNEUMATIC 0-150PSI 1/2 Inch NPT Particulate Filter+Coalescing Filter Air Filter Pressure Regulator Combo Piggyback, Air Tool Compressor Filter (Semi-Auto Drainage）

4.8 (2) Write Review
Free shipping on orders over $29.99

$66.99

$ 32 .99 $32.99

In Stock
  • 【Product Name】Air Dryer System Filter Regulation Combination
  • 【Size】Air Filter Pressure Regulator Port Size:1/2"NPT；Gauge Port Size:1/8"NPT
  • 【Working Pressure】0-125 PSI【Maximum Pressure】150PSI【Working Temperature】32～140°F
  • 【Package included】1 X Air Filter Air Drying System, 1 X Nickel-plated Iron Air Plug, 1 X Nickel-plated Iron Air Coupler, 1 x Valve Switch Ball Valve，2 X Male Pipe, 1 X Teflon Tape, 1 X 5 Micron Filter & 0.5 Micron Filter Element
  • 【Features】With Different Filtering Accuracy To Clean and Dry the Air, Filter Moisture, Fine Particles, Dust and Foreign Matter in the Air.


Product Description

JZ-100

  • Filters Moisture and Particles from the Air.
Product Description

Air Filter Grade 2 Stage Air Drying System

  • Port Size:1/2" NPT
  • Material:Aluminum Alloy Body, Strength to Engage in Corrosion Resistance
  • Pressure Range:0-150 PSI
  • Operating Temperature Range: 40-140F(5-60℃)
  • Easy To Use:light Weight, Small Size, Easy Installation And Maintenance.
JZ-100

Product Feature

JZ-101

Dual-Layer Filtration

  • Equipped with 5μm and 0.5μm Filter Elements, The Dual-Layer Filtration Effect Provides More Precise Filtration.
cup

Filter Cup

  • Transparent Filter Cup Allows You to See the Volume of Water and Oil in the Glass.
  • The Capacity of the Cup Must Not Exceed 80%.
JZ-100

Installation Direction

  • Pay Attention to the Airflow Direction,And Follow the Arrow on the Pressure Regulator.
JZ-100

Complimentary Accessories

  • 1 × Nickel-plated Iron Air Plug and Iron Air Coupler、2 × Male Pipe、2 × Filter Elements、1× Copper Nickel Plated Ball Valve、1× Teflon Tape.

Steps for Replacing Filter Element（Other Models for Example）

JZ-100

Step 1

  • Rotate to the Left to Remove the ProtectiveCase and Filter Cup.
JZ-100

Step 2

  • Rotate to the Left to Disassemble the 5μm and 0.5μm Filter Elements for Replacement.
JZ-100

Step 3

  • Replace it with the New Filter Element.
JZ-100

Step 4

  • Install the Protective Case and Filter Cup Back into Place.

Direction For Use：

  • Stage 1 Regulator/Filter:The Adjusting Knob can Precisely Control the Air Pressure within the Range of 0-150PSI.The Knob will be Locked when Pressed to Ensure Safety During Use. Equipped with 5 Micron Element, It can Filter out up to 95% of Particles and Moisture in the Air.
  • Stage 2 Filter:The 2 Stage Filter Cartridge, With a Fineness Of 0.5μm, Removes 98.5% of Suspended Solids, Particles and Other Impurities.
  • Accurate Pressure Regulation, Clear Display.
  • Each Product Has a Backpack-Type Mounting Bracket, Which Can Be Installed on the Wall or Fixed Somewhere.
  • Ensure the dry gas, effectively extend the life of the air tool.Triple Aluminum Alloy Body: High Strength, Corrosion Resistance.

natevw
2025-07-22 16:58:09
This is a nice little regulator. Came partially assembled and just needed to add on the gauge and valve/fittings. All feels well made and sturdy. Planning to use this to run some individual tools at a lower pressure than my main compressor.
S Miller
2025-02-02 13:53:03
The thing I hate about these units is that it's really tough to get a wrench behind the gauge to tighten it down. I've actually got one wrench I ground down specifically for this task. Once it's assembled it's fine, though. I'm using this to help keep water out of my plasma cutter.