Your cart is empty.
Your cart is empty.Product Description
It Can Effectively Filter Impurities, Dust, Moisture and Particles in the Air Regulating Function: With Pressures Ranging from 0 to 145 PSI, You Can Pull the Button on the Filter and Rotate It to Reduce the Pressure.
Product Description
AC3010-03 Air Filter Pressure Regulator
- Air Port Size: 3/8" NPT；Gauge Port Size：1/8“NPT
- Flow:2000 L /Minute
- Max Working Pressure: 145PSI(10.3BAR)
- Operating Temperature Range: 40-140F(5-60℃)
- Drain Type: Manual
Product Feature
Precision Pressure Gauge
- The Pressure Gauge with Purple Copper Core is More Accurate to the Pressure Induction, and the Metal Shell is Resistant to Impact.
Fiber Filter Element
- The Filter Element is Made of Fiber. the Filtration Capacity Can Reach 40um, Which Can Effectively Filter Particles/Water/Oil in the Air.
Transparent Filter Cup
- Transparent Filter Cup Allows You to See the Volume of Water and Oil in the Glass.
- The Capacity of the Cup Must Not Exceed 80%.
Complimentary Accessories
- We Will Give Away the Following Accessories: 1 X Nickel-plated Iron Air Plug, 1 X Nickel-plated Iron Air Coupler, 2 X Male Pipe, 1 X Teflon Tape.
Steps for Replacing Filter Element
Step 1
Press The Drain Button And Turn The Protective Case Clockwise To Remove It.
Step 2
Remove The Filter Element To be Replaced With A Screwdriver.
Step 3
Install the New Filter Element.
Step 4
Install The Filter Cup and Protective Housing Back Into Place.
Mark at Ed’s Garage
2025-07-27 13:00:15
Included everything needed for air regulation on a new plasma cutter. Well-made and does its job. No problems during use.
Eduardo Barreat
2025-06-23 12:22:58
Working good
J. Miller
2025-06-08 10:28:06
I'm an amateur Woodworker, so take my review with a grain of salt (limited experience), but this was very easy to install, and works well. The adjustment could be a bit smoother, but I also installed it in an awkward spot due to necessity, which likely compounded the issue. I like that the knob locks.its dry here now so now, so I can really tell how well that feature works.
The Grumpy Guy
2025-05-07 16:59:59
I was setting up a complete a system in my wood job and came across these when I was doing my research and these are a great find I bought five of them and they all work great if you're looking to set up a new system or add to one of your existing months these are perfect fit highly recommend them and would buy them again if I need them
WBubbers
2025-04-07 10:44:59
Seems to regulate fine and the oiler works, but it does have a few small leaks I could not get rid of using teflon tape or liquid teflon.
Copper Minehart
2025-03-08 15:01:26
For the money, it's a hard deal to beat.I have not calibrated the regulator on this yet.. though subjectively and operationally it appears to do a good job.Don't expect a high flow rate from this unit. It is pretty small. Just perfect for an airbrush...Note:I bought two of these and hacked them up to create a water-trap/regulator/DRYER for an airbrush booth for model painting. This was done by modifying the second unit's water trap/separator and filling it with silica balls. So far so good.
Randal Keith Jewett
2025-02-04 11:38:13
Solid metal construction, accurate gauge.Works good, haven't had it long enough to see it collect anything though.
DBM
2025-01-16 15:13:59
Needed a better solution for home workshop and was still getting moisture in the equipment and hate manually applying oil. Noticed an immediate improvement in my sander and love the ease of adjustment. So far, love it and would consider more of this brand. I decided to put this on a particular line in case oil residue remained and didn’t want that in my HVLP guns even though you can easily shut off the oil. Just my preference.
Recommended Products