Your cart is empty.
Your cart is empty.Product Description
Why Choose Us
We are a manufacturer with many years of experience in developing and selling epoxy resin Our mission is to provide you with more needs.
- BPA & VOC Free
- Low Odor & Easy Mix
- Bubble Free & Crystal Clear
- Self-leveling & High Gloss
- Hard as Rock & Yellow Resistance
- Scratch Resistance & Food Safe
- Heat Resistant Up To 203°F
TAKIMO Bubble Free & Crystal Clear Epoxy Resin
Clear Glass-Like Epoxy
The transparent epoxy on the market is offered in our epoxy resin kit.We are always here if you are dissatisfied with the clarity of our ultra-clear art resin crafting kit,and it’s a high gloss product you have ever used.We have created an extra strong formula that is extremely hard after fully curing,we will help you every step of the way.
- It is recommended that you keep the working temperature between 70°F-80°F.
- Epoxy resin is a temperature sensitive material.
- When the temperature is too low, it becomes very thick and the curing time is prolonged, and when the temperature is too high, it becomes very thin and the curing time is shortened.
Long-Lasting and Heat Resistant
Our resins are UV stabilized tested to prevent yellowing. Its heat-resistant temperature is as high as 203℉, and you can put a hot coffee cup on the coaster at will.
Safe for Beginners and Pros
It's very easy to use, you only need to mix the resin and hardener according to the volume ratio of 1:1 to cure, it has a self-leveling formula.
Multi-application
Perfect for all kinds of DIY projects, casting,jewelry making, coasters,silicone molds,or coating tabletops,art paintings.For large molds each layer no more than 1/4 inch.
Naomi
2025-09-03 10:40:59
This has been one of my favs so far-affordable, very clear/shiny, low bubbles (as long as you follow good practice- warm it before or during stirring if bottles are cold to the touch, pour B in first then add A, stir very slowly for 5 min). It’s ridiculous for anyone to say “no bubbles†but the bubbles left are easy to remove with a lighter. Very low odor. Working and cure time are good, as always cure time is greatly dependent on the temp of the room you are curing in! I point a space heater at it while curing if the room is cold, this greatly speeds up curing. I often finish an item at night and it is hardened when I wake up. However if you cure in a cold room, it can take much longer - as is the case with any epoxy.Now the weird caveat- The instructions I noticed said that it’s not to be used for anything thicker than something like a 1/2 inch (I can’t find them to confirm exact amount- but I’m sure it was less than an inch) because it could get so hot that the project would melt. It was shocking to me that this was not mentioned on the product listing- it even says it could be used for large projects. I decided to give it a try anyway since I often will pour in layers 1/2-1 inch, my projects turn out fine BUT one time I mixed a large amount (600ml) as I was pouring a layer for several molds and a while into my working time I noticed tons of steam coming from the measuring cup, I touched the outside of the cup and it was shockingly scalding hot and I had to throw out half of the resin as it was lumpy/almost completely hardened, which sucks because 300ml is definitely expensive. So my lesson is to work in smaller batches and pours. Aside from that, no complaints.
alfred
2025-08-16 21:07:32
We followed the instructions to the letter. A 50/50 mix is easy to do precisely. It flowed to a perfect level with no bubbles. Very pleased with the results. it did appear to be fully cured in 24 hours.
Customer
2025-08-15 18:23:55
This affordable product does what it needs to do. I do acrylic pouring projects and enjoy the finishing touch of resin. I will buy this product again.
Slackey
2025-07-21 13:50:02
Did have bubbles after mixing. Used heat to remove them. Also became cloudy when mixing. Was clear before mixing. My projects did come out after curing.
Customer
2025-07-19 11:11:42
Arrived on time. Works as advertised. Price is right!
Carol
2025-06-22 10:44:07
It is a great expoxy resin to use
fischer.dan
2025-05-29 13:58:22
I used the resin for coating a wooden bench to give it a plain white glossy plastic look. Overall, I am really pleased with the result and the resin is easy to work with. I had to make two layers, because I made several mistakes at the first attempt:1. The temperature of the resin is critical. I put the the two jugs in hot water (about 120F) before mixing them. While this is not a bad idea (it should reduce the cloudiness of the resin) I should have waited for it to cool down to room temperature again before mixing it. The reaction was really fast and it became very viscous already after a short time (maybe about 20 minutes). For the second layer (at room temperature) I had much more time.2. If you mix a larger volume at once, I recommend spilling the resin as fast as possible where you want to have it, and don't leave anything in the bucket. I first tried to spill only small portions of the resin on the board and carefully spread it, but the resin in the bucket got so hot that it reacted very quickly (and got even hotter). At some point it was too hard to be used.3. For the first layer, I used mica powder to tint the resin. While this gives an interesting shimmer to the resin (and you can see in which direction you spread it), this was not really the effect that I wanted. For the second layer I used liquid white dye and that worked perfectly.Also, it is preferable to work with it in a "dust-reduced" (and insect-free) environment. I didn't really have that and there are some small imperfections ... but overall the result is really nice.
Ed Catuto
2025-05-27 18:46:17
Very few bubbles!
K & B
2025-05-11 12:58:52
Does exactly what it claims to do for my requirements. I use a lot of pigments and mica powders and am very happy with the quick curing time. I don't do any clear resin work so I cannot comment on that. This product is now my go to resin.
Leena
2024-12-03 14:27:46
more expensive than most epoxy combos we would get in Singapore. Works the same as the super cheap ones that are on shopee or the like. disappointed.
Recommended Products