Your cart is empty.
Your cart is empty.You asked for it, we listened. Introducing the highest quality board Tech Deck has ever made with the Pro Series Finger Board. Premium materials mean epic performance on and off the course. Made with real 5 plywood decks, dual durometer wheels with bearings, polished metal trucks, and textured pattern foam grip, allow for pro level control and next level tricks. Take your Tech Deck collection to a whole other level. These pro series boards are the only professional fingerboard with real skateboard graphics. Each pro finger board comes with a wooden storage display to store and ride your board on the go. Use it as a grind box to perfect your next trick. All the feeling and sounds of real skateboarding, right at your fingertips. Are you ready to go pro? Pro series boards need pro level obstacles with the Daily Grind Pack. (Sold separately) Raise the standard with 3 obstacles for more ways to play and create your Tech Deck Skatepark. There are tons of Decks, toy figures & playsets to collect! Ride, flip, and grind with Tech Deck fingerboards from real skate companies! Tech Deck mini skateboards for fingers and ramp sets make the perfect gift for girls toys age 6-8 who love small toys and cool toys. This can also make an alternative to toy cars as a boys toys age 6-8 item. Start small and go big with Tech Deck.
George P.
2025-08-31 14:31:06
Overall , bravo tech deck , bravo. By far one of my favorite decks I’ve ridden in a while and as you can see I have several boards from several brands and several brands of trucks. One the trucks are very smooth even when tighter, they still rock back n forth nicely allowing nice carving and just generally high steeze factor when landing flips and grinds. 10/10 for the trucks. Consider changing the pivot cups unless you like really loose flowy trucks like meTwo the wheels my favorite part even if I had a mishap with mine.very grippy very smooth and very quiet and bearings spin for days. However if you powerslide a lot or do reverts a lot, I’ll give you this advice if the outer wheel ever comes off the inner core take a tooth pick and super glue and Dab it on inner core , then gently pull the outer wheel back on. This prevents the outer wheel from deforming and sliding off again. Unfortunately I didn’t do this and mine deformed to the point where it was no longer sitting on the inner core properly6.5/10 bc the wheels only lasted 5 daysGrip tape . My favorite tape I’ve used and I’ve used fbs tape , that tape and rip tape and a few others and this is my favorite tape, except the fact it’s too thick. It takes away from the shape of the board ( which outside of perimeter shape being a bit flat toward the Tail and nose the concave is great, the pop is perfect tail and nose and perfect although I wish the nose was a tad shorter and like a MM more narrow than the tail. Overall a great buy. I plan on collecting all of them and buying another plan b and this one will be the one I stick other companies parts on just to see how it rides with those parts . Guess techdeck gave me a fun little experiment. Hope spin master and the folks at the tech deck brand gets the best success from this line up.Overall I’d give this a solid 8.75/10
Saucytuna
2025-08-26 10:31:30
The media could not be loaded.
Crystal
2025-08-24 13:32:52
When my son who collects tech decks said he wanted a pro I was very hesitant because of their price. Still I relented and got him one for his birthday. I was surprised to see how good the quality was and the packing that it came in was pretty neat. It even included a tool that he could loosen or tighten the wheels with. He was pretty excited and I decided I would buy another because the quality was so good.
Eranda
2025-07-20 10:37:39
I got this for Christmas and I was very excited it was one of the main thing I asked for and it isn’t really cheap either. But the quality and the price are just not worth it. My board broke within 3 months of use, I did not really beat it up or anything. The plys of the board became separated and one ply broke in the nose so there isn’t any pop. The wheels were not good either, after a week or so they came apart and were streched so much that I had to buy new ones. The kingpin of the trucks came out way too many times as well. You are better off buying from anyone else. The only reason to buy this is for the official prints but otherwise DO NOT WASTE YOUR MONEY
Carl
2025-06-21 14:15:34
If all you want is the skateboard, the price is alright for a first pro board. I just got mine and after looking at it, I think the pivot cups (the things that keep part of the truck from moving a way they aren’t supposed to) will give out first. Those are not always expensive, but it is a bit annoying. However, the rest of the board is worth the money compared to a 20 dollar teak tunning beginner board. If this is your first pro board, I would say not bad. If this is not and you like Tech deck sure, but for not much more you can get China trucks and basic wheels and a decent board and quality is the same or better, but better pivot cups. The only thing to watch is that as a seven ply board, it feels different from a five ply I am used to, so that feels different. Pop is good. Wheels are the most grippy wheels I have and don’t squeak like other wheel, maple, teak tunning, etc.However I was in it partially for the box that had metal side rails. The box window is cheap plastic that you see in toy box windows and the lid does not snap on and has no hinge. It came tapped shut. At this price, I would expect a hinge or some clasp to keep it shut and I would prefer a harder window. A phone screen protector is more durable. Also, it slides around when you try to play with it. I have cheaper pro obstacles that came with some grip pads on the corners to keep it from sliding. Again, at this price point, I expected more. This box is why I won’t buy the pro obstacle tech deck pack. Too much and I have get it all for half the price and better quality elsewhere.Awesome tool though.
RK
2025-05-17 16:03:57
The trucks are amazing. Great bearings. It's a true skateboard in teeny tiny form, not a cheap plastic toy.
Mireya F
2025-04-09 09:37:18
Le encantó a mi hijo
wobby
2025-04-01 19:06:43
Very expensive but was the biggest hit on Christmas Day. Well worth the money.
David Webb
2025-03-10 12:33:53
My son wanted a tech deck pro really badly. It lasted all but a day before it started falling apart, the bushings in the trucks snapped (rubbers) and the deck wouldn't roll properly. Biggest waste of $50 I've ever made. Don't buy one, they're very flimsy and poorly made
Mackenzie Kostelyk
2025-03-04 10:13:01
Nothing against Amazon here; Tech-Deck just dropped the ball HARD when they made these, the board itself is decent, the grip tape that is pre-installed is fine... Oh boy are the wheels bad, they cracked immediately, bearing seized to the truck, so when I tried to take it off, ripped the wheel off the bearing itself... Pictures above to prove. Literally buy any other fingerboard than Tech-Deck if you actually want to enjoy fingerboarding
lauren new
2025-02-10 15:44:09
Rubbish.
Recommended Products
