Your cart is empty.
Your cart is empty.Product Description
The fan has its own power to inhale ordinary air from the top, and through HEPA efficient filtration, the filtered clean air is evenly sent out at a speed of 0.45m/s+20% on the air outlet surface of the filter.
Key Features
Aluminum Fan
- Built-in air duct diversion system, reduce noise, increase fan service life and improve fan efficiency.
Copper Wire Motor
- All models of Air Flow Clean Workstation use copper wire motors, which are quieter, more efficient, and escort the work area with higher cleanliness.
Solid & Stable
- Connect the corner code, solid and stable. The style of assembled model connection is very convenient for installation, disassembly and moving.
Aluminum Support
- The industrial aluminum profile is used as the support, which is beautiful , dirt resistant and easy to produce ash.
PVC Curtain
- Fully transparent PVC curtain, black conduc tive link is printed on the transparent PVC film with good imitation of static electricity, and the mesh surface of the product has better ESD electrostatic discharge effect.
Adjustable Speed
- Three adjustable spped to meet your different work needs. Extremely low operating power consumption, effective cost reduction.
Product Features
- The Vertical Laminar Flow Hood adopts a galvanized case, which is durable, not easy to wear, and not easy to deform. Insulated handles on both sides.
- It uses HEPA-filtered air and can trap 99.999% of particles with a diameter greater than and less than 0.3 micron.
- Suitable for assembling ultra-clean production lines, which can be configured to be used by one or more sets according to the requirements of the process, or can be connected in series to form a 100-level assembly line.
Cedric Anderson
2025-08-29 20:25:33
Very pleased with the price and size. Exactly what I’m need for my needs. The only negative thing I can see is that my instructions were blurry and hard to read.I highly recommend getting an idea of how it is assembled before putting everything together. Hopefully my pictures help you with the layout. Doesn’t take long to assemble and it was delivered quickly. Wish they allowed you to purchase replacement filters too.You won’t be disappointed. A similar setup was going to cost me over 1k.
shawn
2025-07-19 13:18:06
no parts numbered no directions no way to contact. buy a different one
JUAN MANUEL JARAMILLO
2025-06-24 09:46:58
Excelente producto. De acuerdo con mis necesidades.
BambooRollingTip
2025-03-02 11:59:11
blower motor lubricant smells terrible. Ran the blower with ozone for 24hr. Smell still came back. Whole lab stinks during and after use...
Ignis Sempra
2025-02-10 17:35:39
Everything about this flow hood is deceptive one the filter is not of rating sure it may be the proper micron but there's no laminar flow coming out anywhere from this filter regardless of the speed setting I even changed the speed pot so I could try to control it a little better: nothing. It has a small pocket of imitation laminar flow about 3 inches from the filter but these things are garbage. You are better off spending a little more and buying a fan filter unit that has (needs, is important, is CRUTIAL) A PREfilter as well. Don't trust chap Chinese knock offs.
Recommended Products
$349.99
$ 99 .00 $99.00
$129.99
$ 52 .99 $52.99