Your cart is empty.
Your cart is empty.Product Description
Kristoffer Zimmerman
2025-09-04 12:24:54
I’ll admit it—the first CIMPLE CO BNC Compression Connector I crimped didn’t exactly go as planned. Turns out, cutting the insulation to the wrong length makes for a pretty sad-looking connector. That one didn’t just fail; it humbled me in front of my tools. But hey, live and learn, right? The good news is, these connectors are forgiving if you aren’t perfect on the first try.Once I got my measurements sorted (because, yes, precision matters), everything went smoothly. The connectors locked in like a dream, and suddenly I was back in control of the live video feeds at church. The quality was flawless—no signal drops, no static—just a crisp, dependable connection that even the pickiest AV enthusiast couldn’t complain about.In the end, these connectors earned their spot in my kit. If you’re willing to measure twice and cut once (okay, maybe twice), these little guys will reward you with rock-solid connections every time.
LT
2025-08-23 12:56:23
These connectors are built better than most. They are tight with no slop. They fit into two of my crimp tools. I have never had one fail.
Dan
2025-08-05 12:30:05
A lot easier to use than some other connectors I've used. I noticed that a few connectors that did not connect properly may have been over compressed/crimped. (?)
sean
2025-07-06 10:38:09
So once I figured out how to use these they do work great. I would however call them a 2 piece compression connector but they work. Make sure when you compress them that you stop when you feel the click otherwise you will damage the connector and will have to chop it off but I figured out how to make it work.1. Pull the back boot off and slide it on the cable after stripping the cable2. Push the connector onto the center conductor and make sure it is fully seated.3. Push the back boot onto the connector.4. Insert the connector into your compression tool and compress until you feel a click. Once you feel the click back off or you will damage the connector. If you have a ratcheting compression tool you may need to adjust out your tool to prevent damaging these connectors.I use these to make HD-SDI cable and 3G-SDI cable and they work great for that application. Highly recommend these.
Brightsyde1
2025-07-01 16:45:34
Best BNC connectors I have ever used. easy to compress without breaking apart or damaging like some others. Out of the 50 I got not one off them gave me any problem.
Evil J
2025-06-16 16:04:52
Not much more to say than the title. I've used a bunch of different compression fittings from different companies and these are the best by a mile. Assemble easily. There is a small gap between the sleeve and the body that allows you to visual confirm the coax is seated in the connector. The inner pin is already in the connector and is machined such that the center conductor easily inserts with a little give that you can feel to tactically confirm the connector is assembled correctly. Once compressed, the connectors are on tight and don't work loose or come off.I've installed nearly 300 of these now on RG-6 for SDI signals and I don't think I've had a single failure. Other brands, I'll typically see 5% to 15% failure rates.Please don't ever change these connectors or stop selling them! These are the only ones I'm buying going forward!
Sicko
2025-05-30 13:41:36
Easy to install. Most of my connections worked, but had a few I’ve had to redo
felix
2025-05-11 17:34:52
Son excelentes
Paterasp S
2025-02-15 10:29:50
Excellent product.
Recommended Products