Your cart is empty.
Your cart is empty.Product Description
Sartatue Multi-functional Thread Tip Replacement
- Made of aluminum alloy: Not easy to be oxidized and broken.
- Easy installation: Please check the sizes to ensure you choose the right thread tip replacement.
- Wide application: Widely used in all kinds of brush heads.
- Each thread tip replacement is equipped with 3 kinds of nails.
Warm Notice
- Please check the sizes to ensure you choose the right thread tip replacement.
- 0.8 inch: Suitable for 0.8 inch diameter poles.
- 1 Inch: Suitable for 1 inch diameter poles.
Wilmonger
2025-09-05 10:00:56
These seem decent quality, unfortunately I didnt realize they were the wrong size.BEWARE. There are 3 common size poles...1", 3/4" (.8") and .87"(22mm). Make sure you are measuring the outside diameter of your pole correctly to ensure it fits. I ordered this one a it was close to fitting, but I ended up requiring a .87"/22mm tip. The .8 and .87 tips look almost identical when holding them, but one is about 1.5mm larger.
dan whitney
2025-08-18 16:15:54
Works well and has all screws or bolts needed to install
Customer
2025-08-07 12:38:47
Fit my handle perfectly and is well constructed.
Atomicgerry
2025-07-25 17:37:58
This adapter works perfectly to replace the plastic one on my auto cleaning brush. The plastic just cracked and broke off the brush. I found these on the Amazon site. They have different sizes to match the size of the pole. I measured mine and ordered these. They were quite easy to mount and screw on to the end and also drilling new holes for the screws to hold it in place. I used my own larger screws because they fit a little better. Overall theses replacements works quite well and they are more sturdy than the old plastic ones. I am very happy with these. If you order them, remember to measure the diameter of your pole so you pick the right one.
Nikko T
2025-07-20 12:50:42
Worked a hoped and was able to save a telescoping pole with a broken end
Over the Road
2025-07-09 18:23:10
This is my 4th Carrand fiberglass telescoping pole that snapped off the thread portion that attaches to the brush. At $59 to $60 dollars a pole, I thought I would give this a try. I used the 1inch diameter piece for my project. The pole is a little larger than the part, so I had to ream it out some to get it to fit. Now some have stated that it will snap off in time, but same is true for the ones on a new $60.00 dollar pole. So for $8 dollars for 2 of these I can replace them many , many times.
Randy A.
2025-06-09 12:19:30
reingineered them , and made it work with some duct tape .
Andy Mann
2025-04-14 18:58:35
Package comes with two different sized tips. The larger of the two my aluminum extending pole perfectly, replacing the original plastic part. I had to drill a corresponding holes in the tip into the pole, though I probable could have used self-tapping sheet metal screws. I secured the tip with a couple of rivets and voila…perfect. Pole and soft bristle brush back in action.
Jose C.
2025-02-03 18:33:42
Esta bien fabricado, aunque no dice el diámetro donde va el tubo, ya que si se usa en una extencion telescopica para pintar tendrás que montarla con algo para que quede bien acoplada,O usar la que se daño y montarlo sobre de esa y queda bastante bien.
Recommended Products