Your cart is empty.
Your cart is empty.
Packing List:
1 x Tie Rod End Kit
Each kit contains two tie Rods, four tie rod ends along with the cotter pins and jam nuts.
Condition: New
Compatible with:
2000-2006 Honda Rancher 350 Trx350Tm / Trx350Te / Trx350Fe
2004-2007 Honda Rancher 400 Trx400Fa At / Trx400Fga Gpscape At
2000-2006 Honda Fourtrax Rancher 350
2008-2012 Can-Am Renegade 500
2008 Can-Am Renegade 800
2009-2011 Can-Am Renegade 800R
2008-2014 Can-Am Outlander 400
2008-2015 Can-Am Outlander Max 400
2008-2012 Can-Am Outlander 500
2008-2012 Can-Am Outlander Max 500
2008-2012 Can-Am Outlander 650
2008-2012 Can-Am Outlander Max 650
2008 Can-Am Outlander 800
2009-2012 Can-Am Outlander 800R
2008 Can-Am Outlander Max 800
2009-2012 Can-Am Outlander Max 800R
Function:When the tie rod is worn down, it will become loose and will cause the front end of the vehicle to fall out of alignment. If you notice that your ATV is pulling in one direction, it may be a loose or worn out tie rod end that is causing the problem. This will cause Steering wheel shakes or feels loose. & the tires will have uneven wear. Which will affect driving safety and parking privacy. Replace the tie rod end in time to eliminate potential safety hazards.
We are a factory direct saler. Customers can spend a small amount of money and get high quality brand new tie rod ends. These replacement ATV kits provide excellent value at the cheapest price.
Own it now.
704Powersports
2025-08-16 13:48:27
Put on machine and have not had any issues. Easy to install and fits good. Seems to be a good product for the money. No complaint Would buy from this seller again for sure
Lowell Boudreaux
2025-08-04 11:28:08
Functioned as described and was high quality
Kristin
2025-07-27 17:21:59
Replaced stock tie rods with these.Everything was torqued to factory spec. On the first dry run everything looked fine, but while riding on trails the tie rod stripped the threads & sheared the cotter pin and let go. This could of gotten someone severely injured... Stick to stock parts.
William Vest
2025-07-13 18:34:42
Good tie rods but packaged slightly wrong or confusing, so I almost ruined one of these ends just based on packaging. I ended up having to retap one. When you open the box there are two labeled R and to labeled L. One L and One R goes on each rod. I originally thought it meant one set for the left side of the quad one foe the right as one is backwards threads it would make sense to package them together that way. The tie rod metal itself is pretty soft so trying to put it into the wrong threads almost immediately messes up the threads. I think its just highly confusing with no labeling actually indicating what they meant. Othetwise good product for the price.
Bailey!!!
2025-07-09 21:05:15
Easy install. Perfect fit
Ethan B.
2025-04-16 16:24:42
Fit my 2006 Honda rancher TRX350 with no problems! Pretty smooth and easy install if you’ve ever installed tie rods on something before
Honda doc
2025-04-09 18:33:34
It’s important to note that there is one left hand thread rod end and one right hand thread rod end on each drag link. I read one review that said these were not threaded correctly and wanted to make sure everyone understands this. I just installed these and thought they were very well made.
Casey Carmichael
2025-03-17 11:52:09
So product came as described. I only needed the right tie rod. Was gonna replace the other but the tie rod end wouldn’t screw onto the rod like the threads were off. Did not use the other one. Make sure they screw on before you install. Will se show long they will last as they were really cost effective vs buying OEM
Customer
2025-03-01 14:11:28
Quad. Can am outlander. No problem.
artur
2025-01-16 20:29:05
Quedaron muy bien en mi raptor 660, facil instacion
Véronique Breault
2024-12-24 17:30:15
Seems very well made and after 2 months still look new
Josh
2024-11-14 18:49:04
Very cheap product, the rods did not work different thread and after about 100-150 miles 2 of the 4 tie rod ends have busted.
Recommended Products
