Shopping Cart

Your cart is empty.

Your cart is empty.

Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)

Free shipping on orders over $29.99

$199.00

$ 94 .99 $94.99

In Stock

1.Color:Black


About this item

  • Bluetooth 5.0 LDAC transmission :DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.
  • NFCA circuit :The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
  • Pre-amplifier function :Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier.
  • PA3s is the best power amplifier for DX3 Pro+: PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x 2@4Ω, 10%THD+N, 65W X 2@4Ω, 1%THD+N can be adapted to most situations where speakers are used.
  • Bluetooth headphone amp / Bluetooth DAC application: Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience.



Product Description

DX3 PRO+
dx3 pro

Adapt to different usage scenarios, DX3Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier.

dx3 pro

Pre-amplifier function

DX3 PRO

Bluetooth headphone amp /Bluetooth DAC application

DX3 PRO

High performance DAC for media player mobile phones and tablets

DX3 PRO

DAC+Pre-amplifier application

DX3 PRO

DAC application

When you only need a simple DAC, you can set DX3Pro+'s output mode to be DAC,then it could served as a simple DAC,screen will display current sampling rate and volume will keep outputting 2Vrms.

DX3 PRO

Bluetooth 5.0 LDAC transmission

DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC.

It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LI /APTX HD protocol.

To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.

DX3 PRO

Plug and play, turn your PC into a HIFI source

DX3Pro+ uses 2nd generation 8 core XMOS XU208,

USB supports up to PCM 32bit768kHz and DSD512 native.

DX3Pro+ also has a wide range of compatibility:

Windows 10, MAC, Linux, IOS, Android can be plug and play. Even in the face of higher end ASIO applications,

DX3Pro+ can do a good job: MAC drive free, Win10 with customized Thesycon ASIO driver, PC becomes a professional HIFI source.

DX3 PRO

NFCA Circuit

The new DX3Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion.

It pairs with high sensitivity lEMs and power hungry high impedance headphones nicely.

32ohm load: 1 800mW x2| 300ohm load: 250mW x2

DX3 PRO

Two gain settings

DX3Pro+ provides two gain settings, which greatly expands the range of headphone adaptation.

Lo Gain+6dB

Hi Gain+19dB

SPEC:

USB IN PCM 44.1kHz-768kHz/16Bit-32Bit DSD(Native) : DSD64-DSD512 DSD(Dop) : DSD64-DSD256
COAX/OPT IN PCM 44.1kHz-192kHz/16Bit-24Bit DSD(Native):Not support DSD(Dop) :DSD64
BT IN AAC/SBC/ APTX/APTXLL/ APTX HD/LDAC DSD(Native):Not support DSD(Dop):Not support
Size 12*16.5*4cm

Joseph Pulitzer
2025-07-11 10:29:12
For $200, it's really hard to beat this DAC. I like to listen to music at work, but the PC audio of my work computer is awful. I had a portable DAC+AMP, but it finally bit the dust. I rolled the dice on this, and I'm incredibly surprised.First of all, this was pretty much plug-and-play. Set up just involved plugging in the USB and power, and turning it on. In my experience, most USB DAC setups in Windows can be finnicky to say the least- more so true the cheaper the device. Even though it was playing fine out-of-the-box, I did install the drivers from the website afterwards and then upgraded the firmware, and again it was hassle-free.The sound is very good, if not a little uninteresting. It's clear, clean, and very neutral. Which is certainly fine, but so unremarkable it's hard to comment about it. But hey, that's a pass in my books. It does support very high PCM and DSD bitrates, which for the price is phenomenal.The amp is serviceable. I doubt anyone who's considering a $200 desktop amp has a pair of Sennheiser HE1s, so for its target audience, it's certainly powerful enough to drive a decent pair of headphones. With that said, anything with more impedance than a set of mid-range cans, and I would have my doubts.I did try the bluetooth capability on my Pixel 6 Pro. The sound was very very clear and clean- there were no hiss or static coming through, and the stream was at a high quality bitrate with LDAC enabled. There was of course a bit of lag, but it wasn't atypical of most BT playback.The display is easy to see. The wheel is stiff and clicky, so there's little chance of bumping into the knob and rupturing your eardrums. It's reasonably small, enough to fit most desk spaces. Generally, the build quality seems to be really good considering the cost. Wherever they cut the corners, it wasn't on the case.There are a few very minor annoyances. The power supply is very short, and since it's a 15v power supply, it's a somewhat odd voltage to replace. I also wish that there were more buttons, so that I don't have to rely on the clicker as much.Overall, it's a fantastic buy- especially for an audiophile that's a beginner, someone on a budget, or just looking for a DAC+AMP that punches well above its weight class.
Average Joe
2025-07-05 17:19:02
This thing supports DSD512, so those high-resolution tracks are delivered with the clarity of a mountain stream—so pure and detailed, you can almost hear the conductor's breath in a symphony. The NFCA headphone amp? Oh, it’s a beast. My old headphones came to life in ways I didn’t know were possible, hitting every note from the deepest bass to the crispiest high like it was nothing.And let's talk about its looks—it's got a minimalist vibe that screams 'I mean business'. It's so stylish yet unobtrusive, blending perfectly with any setup without screaming for attention. Yet, once you hear what it does to your music, it’s all you’ll want to talk about.Bottom line, if you're serious about sound, the Topping DX3 Pro+ isn’t just a good investment; it’s a must. It's turned my average playlist into an audiophile’s dream and absolutely spoiled me for anything less. Now excuse me while I go lose myself in some FLAC files for the next few hours—or days.
mike
2025-06-12 13:58:55
It works you plug the power in and plug the usb in. Though every now and again it stops working like windows stops recognizing the device. The fix is to unplug everything and replug it back in.Other than that for what it cost the minor inconvenience is overlookable.Build quality is good the knob is tactile and it plays nice with my older gen schitt amp. I had to replace the older schitt dac when windows decided that the usb controller is no longer supported.I bought an all in one amp/dac from schitt never again it is a paper weight. Bad interference separate systems is better sound quality and easier to upgrade.
John Sonner
2025-05-10 15:21:39
This dac/headphone amplifier is an excellent value. I found it very easy to set up and use. The sound quality is incredible, very linear, ruler straight neutrality. It is a very small unit that is perfect for desk top use and build quality is superb. I hear details in the music that I never heard before. Check out Audio Science review about the DX 3 Pro
Wakazo
2025-04-30 09:24:31
I thought it was my ears. The sound was weaker on the left. I also doubted my headphone (Dan Clark Aeon 2). But it was a faulty earphone jack. I was too lazy doing the research. I finally did full test after almost one year. change Amp, change headphone, waring the headphone left and right reverse. test using headphone extension code. testing COAX left and right out put. It is a faulty phone jack. I threw it in the trash then had a second thought. I took it out of trash and open it up and try to fix it. So far i haven't been able to make it work. Oh I found similar review on headphone.com review. His case was more obvious (no sound on left) so I think he got the replacement.
cond12
2025-04-17 18:10:03
I am very happy with this DAC. Very clean sound and an abundance of connection options. It has more features than I really know what to do with. I am using it in conjunction with the Topping PA3x stereo amplifier and use both of the devices as the audio "amplifier" for my computer. Could not be happier with the setup! Highly recommended!
Yvonne Gerlach
2025-03-17 16:09:36
Make sure the 1/8 inch plug is all the way inserted. You may have to use a surprising amount of force to get that last little bit.
Cliente de
2025-02-16 09:36:11
Excelente producto, buen sonido HiRes. No es MQA.El único inconveniente es que el manual es una extraña mezcla entre chino e Inglés incomprensible. Recurrí a videos en internet para configurarlo, lo que en realidad es muy sencillo.Lo recomiendo ampliamente.
Adam
2025-02-15 14:18:08
Habe meine Beyerdynamik DT1990 Pro und DT990 Pro zuvor mit einem Gerät betrieben, dass nicht ausreichen Power hatte. Jetzt mit dem Topping ist der Klang ein Unterschied wie Tag und Nacht. Bei Musik, kann man die unterschiedlichen Instrumente viel besser ausmachen, der Bass hat deutlich mehr punch und bei Spielen, vor allem bei FPS-Games, kann man Schritte viel besser hören. Hätte ich vorher gewusst, dass der Unterschied so gewaltig ausfallen würde, hätte ich nicht jahrelang gebraucht, mir ein solches Gerät zu holen. Sehr empfehlenswert.
Emil Persson
2024-11-17 15:01:31
When entering the somewhat daunting world of professional equipment, one might be frightened by terms such as ohms, gain or pre-amp. But not to worry! The Topping DX3+ Pro makes all thag a breeze!I paired mine with a set of Beyerdynamics DT 990 Pro, and after changing the gain, they sound amazing. An awesome buy, and you don’t have to spend double for a pair of mediocre gaming headphones!
Torero
2024-11-15 10:28:03
Läuft seit über 2 Jahren ohne Probleme. Bin sehr zufrieden.
Recommended Products

$179.00

$ 83 .99 $83.99

4.9
Select Option

$124.50

$ 50 .99 $50.99

5.0
Select Option