Your cart is empty.
Your cart is empty.Fits Toro models: CCR 3650 GTS Snowthrower 38538, 38537, 38518, 38517, CCR 2450 GTS Snowthrower 38536, 38535, 38516, 38515, CCR 3650 Snowthrower 38445, 38442, 38441, 38440, CCR 3600 Snowthrower 38439, CCR 3000 Snowthrower 38438, 38437, 38436, 38435, 38433, 38432, 38432, 38430, CCR 2500 Snowthrower 38427, 38426, 38425, 38424, 38423, 38422, 38421, 38420, CCR 2450 Snowthrower 38429, 38428, 38419, 38413, CCR 2400 Snowthrower 38418, 38417, 38416, 38415, 38414, 38412, 38411, 38410, 38409, CCR 2000 Snowthrower 38186, 38185C, 38185, 38181, 38180C
Stewie-VB-Dad
2025-08-21 17:45:56
They fit as described and after a couple of YouTube videos were relatively easy to install. The price was fair and they seem to be durable.
Dennis Kayl
2025-07-05 16:16:53
Perfect Fit
Nathan Oppie
2025-06-27 16:30:29
Picked up an older snowblower and the paddles and scraper were severely worn out. It would barely throw the snow out of the path of the blower. These were a little tricky to install as the tolerances were tight but they fit great. About 1/8" clearance to the body now and the scraper works great. Will now throw snow 10'+. Worth every penny. I've used it about 5 times this year so far and there is only slight wear. I expect these to last at least 2-3 years with 10 uses a year.
David Huckabee
2025-04-07 19:22:05
First the good news. The paddles were a perfect match for my 40-year old Toro snowblower. Also the plastic scraper fit too.My only product complaint is that newer Toro models apparently use two fewer screws than mine. You need to carefully align the new and old paddles together using the screws from the old paddles in order to drill out the necessary holes. The rubber is surprisingly resistant to drilling, but it can be done. Four stars because the paddles should have been pre-drilled.Don’t buy if you are impatient, have weak arthritic hands, or you don’t have help with the two, almost unreachable, screws. Even with help, I spent nearly a day replacing the paddles.
danny frantz
2025-04-06 10:13:08
I took this snow blower off of someone's hands because they said it did not work anymore. Quickly realized during the first snow storm of the season what the problem was, ordered these new paddles and scraper and WOW! Snow was flying thru the air like it was supposed to and the surface was clean.
Mule
2025-03-28 10:29:00
Easy install. Scraper blade perfectly cut and drilled. Paddles seem of high quality. FAST SHIPPING.
DC Persky
2025-02-04 16:28:05
Fast delivery, came in a couple of days. Both products fit perfectly but the installation was difficult due to the design of the snowblower and years of corrosion. Certainly not the fault of this suppliers product. Quality of product was exactly the same as the original parts on my snow blower. I would recommend this seller and product but I suggest you remove the old parts first in case you need to order replacement nuts and bolts. I was able to reuse originals but it was a challenge removing them without damaging them.
Happy Family
2024-12-06 18:56:02
The holes on the scraper didn’t line up so I had to drill them. The paddles were fine. They are just a pain to install especially the bolts on the far outside edges. I needed a #25 star wrench for my Toro CCR 2450.
Recommended Products
