Your cart is empty.
Your cart is empty.Product Description
Specifications
- Input Voltage: 120V
- Dimmable LED ≤ 25W
- Incandescent Bulb ≤ 60W
- Special Features: 3 Way Dimmable Touch Control
- Dimension: 0.63in (H)*1.18in (W)*1.69in (L)
- Wire Length: 4.09in
Package Included:
2x Touch Dimmer Switches
8x Wire Caps
1x User Manual
3 Way Touch Dimmer Switch
Dimension: 0.61in (H)*1.38in (W)*1.95in (L); Wire Length: 3.94in
These 3 Way dimmable switches equipped with latest dimming pattern, allowing you to adjust the brightness from dim to high smoothly. Featured by its cute size, the switch can be tucked easily under the lamp base, fits bedside table lamp, end table lamp, desk reading lamp or office lamp.
Warm Tips
1. Please don't connect electricity until the all the installation steps are completed
2. Please make sure the copper ring attach tightly to the lamp base, otherwise the lamp will not light
3. Please watch the video to install the switch if necessary
Assemble with Ease
1.Cut off the electricity supply.
2.Connect 3 white wires with included wire cap.
3.Connect black wire of the touch sensor to the remaining wire from power plug.
4.Connect red wire to the remaining wire of the lamp.
5.Install the copper ring to the lamp base.
More installation information you could refer to the video on the page.
jared
2025-09-05 14:06:27
Excellent product. Instructions clear and resolved a ham radio interference issue my old one had. This one seems well built and does not turn on every time I key my radio on 40 meters :)Would recommend this as a quality product!
Mitchell
2025-08-26 12:22:04
The touch dimmer controller worked great. put new life into an old lamp.
Z Man
2025-08-20 21:46:03
I am making a lamp from a bourbon bottle and I am using this touch switch as the on/off switch. Very clear instructions for wiring and worked as expected. I wish the switch was smaller to fit more easily in the lamp base.
Customer
2025-08-17 13:30:54
Easy to install. Fixed my 30 yr old night-light touch lamp.
jared
2025-08-12 16:19:09
Excellent product. Instructions clear and resolved a ham radio interference issue my old one had. This one seems well built and does not turn on every time I key my radio on 40 meters :)Would recommend this as a quality product!
Mitchell
2025-08-10 17:57:18
The touch dimmer controller worked great. put new life into an old lamp.
Z Man
2025-08-08 14:58:04
I am making a lamp from a bourbon bottle and I am using this touch switch as the on/off switch. Very clear instructions for wiring and worked as expected. I wish the switch was smaller to fit more easily in the lamp base.
Customer
2025-08-01 10:12:38
Easy to install. Fixed my 30 yr old night-light touch lamp.
indigo
2025-07-24 16:54:57
I don't do a lot of reviews (usually positive ones!) but felt I should definitely writet this one.I have had my touch lamps for going on 20 years. I love them, but the touch switch does go bad after some time (it varies- 5- 10 yrs) and I have replaced the switches in each lamp before, it is fussy work but not that hard. I could not remember the brand of touch switches I had purchased in the past (,they were the same as what came in it originally) but found these here on amazon and they looked right.So. even though it was obvious these switches are of inferior quality compared to the switch I removed, I put the new one in. The wires in this unit are NOT copper (which the original brand has always been). Put everything back together as usual, did nothing different, wires seemed to match what was being replaced and directions. Tried the lamp....there was a huge 'pop' immediately and it caused the circuit breaker to trip. Almost 20 yrs and this has NEVER happened before. Scary Junk.Says right on the lamp not to use any bulbs bigger than 25 watts, and I always use/only have 15 watt bulbs so that was not an issue. I figured out the original switch was from OK Lighting, and will stick with their great quality product from now on. Will NOT purchase this brand again.
Peter Trivanovich
2025-06-16 14:21:08
One of the two sensors blew when I first hooked it up and tested it. I ruined it. YOU MUST follow the instructions. I carefully marked my wires on the lamp with the old unit still attached and hooked the new one up the same way, using the same color pattern. The wires were all the same colors on the old and the new unit, so I figured this would be the best way to install. This was not how the instructions said to do it. That was my fault. When I followed the instructions on the 2nd unit, it worked fine. FOLLOW the instructions.
Ronald B.
2025-06-10 15:14:35
The wire leads are long enough, color coded, and the ground has a sta-con ring.
Mike
2025-06-05 11:38:33
Very easy install, took only 5-7 minites to install in two lamps, but you can tell where it lacks quality. After installing one of my lamps turns on when you touch it, but additional touches don't change brightness or turn it off. It will not turn off until unplugged. Only half in the pack worked, so I give it half stars
Miguel
2025-05-23 18:33:40
Buen producto a buen precio, fácil de instalar con los accesorios incluidos, prácticamente, no necesité herramienta especial.
Fred Jones
2025-05-07 16:42:48
Existing unit was faulty. Followed the wiring on it to replace with new unit. Working like a charm. not difficult. I then tried to add the other unit to another lamp. This lamp was not a touch lamp. Could not get the new unit to work on it.
Elias Flores
2025-05-03 10:53:25
Utilice este switch para reparar una lámpara, viene bien detallada la manera de como conectarse además de tener los accesorios adecuados para hacer la instalación rápida
DonÄić=GOAT
2025-04-28 17:48:34
Wire color options received were a little different but easy to figure out with help of reviews from other customers!
Customer
2025-04-27 17:52:25
The touch switch works well took a little figuring to wire it in as colors did not match but diagram helped figure it out would but again
indigo
2025-04-15 09:22:54
I don't do a lot of reviews (usually positive ones!) but felt I should definitely writet this one.I have had my touch lamps for going on 20 years. I love them, but the touch switch does go bad after some time (it varies- 5- 10 yrs) and I have replaced the switches in each lamp before, it is fussy work but not that hard. I could not remember the brand of touch switches I had purchased in the past (,they were the same as what came in it originally) but found these here on amazon and they looked right.So. even though it was obvious these switches are of inferior quality compared to the switch I removed, I put the new one in. The wires in this unit are NOT copper (which the original brand has always been). Put everything back together as usual, did nothing different, wires seemed to match what was being replaced and directions. Tried the lamp....there was a huge 'pop' immediately and it caused the circuit breaker to trip. Almost 20 yrs and this has NEVER happened before. Scary Junk.Says right on the lamp not to use any bulbs bigger than 25 watts, and I always use/only have 15 watt bulbs so that was not an issue. I figured out the original switch was from OK Lighting, and will stick with their great quality product from now on. Will NOT purchase this brand again.
Peter Trivanovich
2025-03-29 11:47:30
One of the two sensors blew when I first hooked it up and tested it. I ruined it. YOU MUST follow the instructions. I carefully marked my wires on the lamp with the old unit still attached and hooked the new one up the same way, using the same color pattern. The wires were all the same colors on the old and the new unit, so I figured this would be the best way to install. This was not how the instructions said to do it. That was my fault. When I followed the instructions on the 2nd unit, it worked fine. FOLLOW the instructions.
Ronald B.
2025-03-28 09:39:04
The wire leads are long enough, color coded, and the ground has a sta-con ring.
Mike
2025-03-22 19:14:50
Very easy install, took only 5-7 minites to install in two lamps, but you can tell where it lacks quality. After installing one of my lamps turns on when you touch it, but additional touches don't change brightness or turn it off. It will not turn off until unplugged. Only half in the pack worked, so I give it half stars
Miguel
2025-03-09 11:07:19
Buen producto a buen precio, fácil de instalar con los accesorios incluidos, prácticamente, no necesité herramienta especial.
Fred Jones
2025-03-04 17:38:39
Existing unit was faulty. Followed the wiring on it to replace with new unit. Working like a charm. not difficult. I then tried to add the other unit to another lamp. This lamp was not a touch lamp. Could not get the new unit to work on it.
Elias Flores
2025-02-24 12:24:09
Utilice este switch para reparar una lámpara, viene bien detallada la manera de como conectarse además de tener los accesorios adecuados para hacer la instalación rápida
DonÄić=GOAT
2025-02-23 12:44:09
Wire color options received were a little different but easy to figure out with help of reviews from other customers!
Customer
2025-02-03 17:21:30
The touch switch works well took a little figuring to wire it in as colors did not match but diagram helped figure it out would but again
Recommended Products