Your cart is empty.
Your cart is empty.Product Description
Jumper Cables Jump Starter EC5 Connector Emergency Alligator Clamp Booster Battery Clips for Car
- Input: 12V
- Operating temperature: 0°C-60°C
- Compatible with Bolt Power Jump Starter or High Quality Portable Jump Starter
- Cable Length:RED (+) 8" length; BLACK (-) 5" length
Enjoy Your Journey with TPF Products Care
- Usage of Car Jump Starter:
1. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative pole.
2. Plug the cord of jumper cable into the jumper starter's socket.
3. Start the vehicle.
Cautions:
1. Do not reverse the operation sequence of the jump starter.
2. Do not use jump starter to start vehicle if the number of battery indicators are less than 3 to protect the jump starter from damage.
3. Do remove the product from the vehicle within 30 seconds after the vehicle started, or it may cause security incidents.
TPF (TOP PRODCUTS FOREVER)Brand:
TPF is a professionalmanufacturer who sells emergency tools for vechicle,various mobile phone accessory and camera batteries & chargers accessories to USA, Euro, Asia and so on.
High quality promise. We insist in using pure copper as cable conductor and RoHS material to improve the user experience.
Keep developing new product to meet customer's increasing demand.
Jason Bourne
2025-08-27 20:24:25
Works amazing with a button for 12v bypass mode. Originally replaced wires that came with my Bolt Power G06C Portable 600 AMP. The 3 schottky diode rectifiers p/n: 42ctq030 on my old cables blew and this was a cheaper replacement then getting each individual component to solder.Great cables thank you!
JOHN L.
2025-07-25 14:01:05
I needed a replacement for my old Aukey jumper pack since the cable fried. It's a perfect fit. Since sturdier than the original one.
Stuart Chisholm
2025-07-20 10:25:37
For the first time in a very long time, I went outside to find that my car wouldn't start. Although it was one of the coldest days of the year thus far, I had just put a new battery into it and it has always performed like a champ! In any case, I wasn't worried, because I had my trusty lithium-ion jump starter on-board. It was a startling experience, then, when a fully charged jump starter FAILED to get me started! I tried for several minutes. Finally, I called my wife to bring her car around to jump start me in the traditional way. It worked on the first try.Bringing in my power pack (jump starter), I broke out my multimeter and found that the pack was pushing out the required power, but the jumper cable attachment was bad. That's when I jumped onto Amazon and found this one. I'm pleased to report that they both fit the receptacle in my Viking unit, but that they deliver the required power and then some! They're a near match to the original equipment.What I don't care for is how short they are. The originals were short enough, but these are even shorter! Also, the clamps seem small n' flimsy. Again, the originals weren't all that beefy either, but these are smaller still. That said, they worked without a doubt! I'm thinking of getting a second pair, given that the failure of the old unit was due to some chips frying in the circuit board section of the red lead, which I thought was a fuse holder. (It's not!) Getting a quick, working replacement at a decent price is peace of mind at a bargain price. Color me happy.
Elias Tejada
2025-06-15 11:04:16
Excelente
Hal S.
2025-05-29 17:44:43
The cables are at least 10 inches shorter than the original ones. They don’t even reach both terminals in most battery compartments!I would not recommend these for anybody.
C. L. L.
2025-05-12 12:43:29
It's wonderful to be able to replace the jumper cables instead of having to buy the whole set again (and at a reasonable price, too)! I have used them on our family cars, riding mower, etc. It sure beats having to depend on another vehicle to give me a jump start. The delivery time was right on schedule. Thanks!
Mark Maupin
2025-04-09 18:26:47
The leads worked on my Harbor Freight Viking jump starter. The original set had gone bad. The main comment on this replacement set is the length of the leads. They are so short, it becomes awkward to get them connected to the battery with other items in the way. The original HF set was built wit 8AWG wire. This set has 10AWG wire. Bottom line is I would be glad to pay an extra $5 and get some bigger AWG wire that are a few inches longer.
Shawn P.
2025-02-16 15:15:14
These battery clamps were purchased to replace original plastic clamps that broke. These clamps have a metal hinge, making them a great replacement if your lithium-ion battery jump kit has clamps with plastic hinges. The original plastic clamps literally broke during their first use. These metal clamps have been used several times without worry of them breaking.Note* I think my purchase was for the Smart version, which was around $16. Apparently there may be a cheaper version for around $8 with plastic hinges as an option when try to checkout...
Recommended Products
$117.62
$ 57 .99 $57.99
$115.00
$ 45 .99 $45.99