Your cart is empty.
Your cart is empty.Product Description
RENECTIV 56029398AB Chrysler,Dodge,Jeep TPMS SENSOR
Please Double check the interchange number and compatibility for your replacing
- Battery Life: ≥5 years
- Operating Temperature: -40°C + 120°C
- Pressure Monitoring Range: 100 – 900kPa
- Frequency: 433MHz
- Installation Type：Snap In
Package Quantity
4pcs*Tire Pressure Monitoring System Sensor
Replace Part Number
- 56029398AB
- 56029400AD
- 68241067AA
- 68402371AA
- 68464665AA
HOW TO INSTALL THE TPMS SENSOR
Loosening the tire:
Lift your car, remove tire and the valve stem core to allow all the air to escape, then strip away the tire.
Dismount the sensor
- Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
- Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
Mount sensor and valve
- Mount sensor and valve: Slide the valve stem through the valve hole of the rim.
- Tighten the screw-nut with 4.0 Nm with the help of the positioning pin.
- Assemble the sensor body against the rim and tighten the screw.
Mount the tire
- Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
- Inflate the tire, check the balance before installing the wheel.
Brian Jones
2025-09-07 15:25:00
Bought these for my 2014 300 and they worked. I drove my 300 for about 5min and the light reset, no program needed.
Kathleen Chambers
2025-09-01 16:10:59
Working excellent so far, no programming was required for my jeep. Hoping batteries stay up for a bit.
Remoun
2025-08-27 13:07:47
work Great no problem
Bryan
2025-08-23 12:34:03
2013 Chrysler town and country.Had warning light blinking on the dashWent to local tire shop they said one of the Sending units failed and guoted 100.00 dollars to program and install aNew one.Bought four less than thirty dollars cameNext day had the bad one replaced for 15.00 the new one was already programmed cleared the alarm within aCouple of miles driving. Great
Mark A. Lowell
2025-08-21 18:35:42
Good pricing, but no time to park the vehicle at a shop to have them installed.
Lee
2025-05-26 14:02:50
Installed on 2013 ram 1500, Synced up in about a mile no programming needed. The hardest part was breaking the bead on the tire.
Tangle
2025-05-22 15:42:58
Purchased for my Fiat 500, and I paid to have them professionally installed. I’ve driven 5 different times now, at length. NO CONNECTION! What a waste. Totally disappointed and angry bc I’ve put time, effort and money into getting these on. I WANT A REFUND!!!!!
dphilmlee
2025-05-15 12:19:45
I had these added when I put on new tires. I was dubious because they were so much cheaper than the OEM TPM replacements. (Mopar wanted around $450 for 4 devices). But my worries were unfounded as they are working as expected on my 2013 Wrangler Sahara. My Jeep identified them within the first 100 yards of driving and were calibrated after about 50 miles or so of driving. Highly recommend.
Ali Hameed
2025-03-18 11:32:47
I used it in my 2014 Dodge Durango. Initially, I was worried when it was installed because it wasn't detecting, but without any computer settings, it automatically detected after a 20-minute drive.
Customer
2025-03-10 10:51:24
مطابق Ùˆ عمل بعد التركيب Ùˆ المشي بسماÙØ© تقريبا 25كم
R
2025-03-05 10:50:49
Installed them on my rims , they worked great. No issues programming them to the car. Great value
Duane R.
2025-02-28 10:09:25
Installed, and started working on their own within 10 mins :)
mohmmed a.
2025-02-12 12:53:35
ممتاز واشتغل ع طول بعد مشي تقريبا ٥ كيلوالسياره دودج تشارجر ٢٠١٤
Recommended Products