Your cart is empty.
Your cart is empty.TREAL SCX24 Brass Servo Mount Compatible with EMAX Servo for Axial SCX24 Deadbolt C10 Gladiator Bronco
Rich G.
2025-08-28 14:24:12
It's treal. Enough said. I have purchase 1000s in treal and to date only one minor self inflicted issue they still made right free of charge. This tray is amazing and fit my ax24 perfect. 4 link set up.
Mudboots
2025-07-30 14:52:44
This works well with Rampcrab servo, Injora brass links, and stock front axle housing. It will work with stock y-link but will not work with stock servo. I used this over other servo mounts since it is specifically designed to mount upper links in double shear when 4 linking the front suspension.
TW
2025-07-12 18:41:26
AX24 it is sometimes hard to find parts for our differentiate from the parts descriptions if you’re ordering the right part. Absolutely required if you’re upgrading your servo’s
Cameron
2025-07-03 11:36:22
Mine was missing the lower mounting holes and the holes in the face of it for bolting the servo down.
Tiz
2025-06-04 10:43:03
Read the fine print.... you won't fit a stock servo.
Santiago Salinas
2025-01-23 12:10:46
As expected from treal hobbies, this servo mount has an spectacular machining, finishing and it helps you to put weight (9g) on the front of the truck to improve its climbing performance, it will work with both upper link configurations 1 (Y link) and 2 links. if you decide to buy it, you won’t regret it
james root
2025-01-02 11:48:34
The holes for the servo are too big for the threads to bite, and you cant put a nut on the back, because its milled on an angle and will snap the screw. Bad design.
Recommended Products
