Your cart is empty.
Your cart is empty.Product Description
Water-Based, Rubberized, Non-Skid Coating
Add traction to any concrete, fiberglass, wood, metal, or previously painted surface with Tuff Coat.
Tuff Coat is feet & bikini friendly!
Feet & Bikini Friendly
Tuff Coat is created through a unique process of cross-linking urethanes, acrylics, co-polymers and recycled rubber granules, making it a feet & bikini friendly finish.
Flexible & Durable
Tuff Coat is a single component, flexible, water-based non-skid coating designed to create a long-lasting non-slip finish.
Apply By Roller Or Spray
Tuff Coat can be applied with Tuff Coat textured rollers or with a low-pressure hopper gun or commercial texture sprayer for larger applications.
UV & Chemical Resistant
Tuff Coat is a UV & chemical resistant product, making it a great, long-lasting choice for both indoor and outdoor applications.
UT-80 ADHESION PRIMER
is a 2 component water-based epoxy primer/sealer that can be used on concrete, wood, fiberglass, and previously painted surfaces to promote adhesion between the substrate and Tuff Coat. UT-80 Adhesion Primer can be applied to damp concrete surfaces following proper application procedures. UT-80 Adhesion Primer is compatible with all Tuff Coat rubberized non-skid coatings.
STANDARD APPLICATION GUIDE
Fiberglass, Concrete, Wood & Previously Painted Surfaces
- 2 Coats of Tuff Coat Rubberized Non-Skid Coating
- 1 Coat of Tuff Coat UT-80 Adhesion Primer
- Fiberglass, Concrete, Wood or Previously Painted Surfaces
UT-95 METAL PRIMER
is a fast drying, single-component, water-based, corrosion inhibiting primer that's designed for use on interior and exterior metal application that is compatible with Tuff Coat rubberized non-skid coatings. The product chemically etches for a tighter bond on clean, bare steel or aluminum surfaces.
METAL APPLICATION GUIDE
Bare Steel & Aluminum
- 2 Coats of Tuff Coat Rubberized Non-Skid Coating
- 1 Coat of Tuff Coat UT-95 Metal Primer
- Metal
Dustaharley
2025-08-13 11:43:10
This floor surface had a much better texture on an aluminum boat than the Raptor liner that I used on a different boat. I am thinking of replacing the other one with this surface. It is much easier to install and way better traction surface. I cannot comment on durability and reliability yet.
Zack & Alyssa kaufman
2025-08-05 12:19:50
Used to redo the interior of my bass boat, super easy to follow instructions and use. Doesn’t get super hot at all when we spend the day on the water
Customer
2025-07-16 16:44:44
recently applied this coating to an old bass boat easy to apply, but proper prep is important. Time will tell how durable -for now very pleased.
Robert H. Mclean
2025-06-23 18:39:34
Easy to apply. It looks great. The only thing is I was hoping for more of a bed liner finish. It’s quite a bit rougher.
Customer
2025-06-13 12:59:31
Didn't come out as thick as it looked in the pictures and was much rougher then expected. I thought it would be more rubbery.
Tommy Tran
2025-04-05 18:30:49
Great product and easy to use.
Cliff
2025-03-09 19:51:55
Very rough and inconsistent texture. I use multiple Bed liner brands professionally so I understand using textured products. I needed something with good water resistance so I thought I’d try this, terrible mistake this stuff is very rough and in 70 degree weather I found it drying in the pan within 5 minutes of pouring out of the can. I don’t know if this normal for this product but it’s a terrible work time. Thanks Tuff Coat for adding an extra week to my project time.
Kevin B.
2025-02-13 12:50:16
Good stuff, not hard to apply, goes a lot further than advertised. Bought 2 gal. only needed 1 gal. used on jon boat, covered the decks with 4 thick coats. Hopefully the shelf life will last till end of summer, will apply 4 more coats.
Recommended Products