Your cart is empty.
Your cart is empty.Material: Brass;Pressure Rated:4000 PSI,Max Pressure: 5000 PSI Size:1/8 inch BSPP thread,Stem OD that insert into magazine is 9 mm Accurately, stable characteristics, with Seal O-rings, reliable and no leakage Quick disconnect probe: Filling probe replacement, straight stem Threaded - Fitted with standard 1/8 inch BSPP thread to fit directly to most pump or bottle hoses
Knuckle Dragger
2025-07-15 15:39:39
Turned out I needed a 9mm not an 8.9Be Shure to check the size u need
Linder
2025-07-13 14:27:32
The O-rings on this product or a little small had to change them to a slightly larger O-ring other than that it fits the hot side, blitz air rifle, 30 caliber pellet thank you
Sean Peters
2025-07-10 12:44:25
The probe’s body seems just fine however as others have noted the o-rings are too small to provide a sealing surface. Ordered new o-rings with 6mm ID and 2mm thick, OD 10mm.
jaime pacheco
2025-06-27 15:13:55
Good
Very Satisfied
2025-06-23 13:34:21
FYI - I Took a shot at trying this in the air ram from a Hatsan 95 rifle. The fit is too loose. I tried other o-rings but none would work. I thought 8.8 mm might be close enough, but it's not.
yamkipor
2025-06-11 11:15:34
First off the only thing wrong with this fill probe was the green o-rings. they were to thick and soft. the o-rings kept it from fitting into my fill port on my FX Wildcat MK3. when attempting to squeeze the probe in with the green o-rings they would split or a chunk would break off. luckly I had good o-rings on hand and used them. after changing o-rings It worked flawlessly.Things I would improve would be larger fill hole to push more air through faster and change the o-rings.worked on my fx wildcat mk3 and my Hatsan flashpup after the o-ring change.
Fernando A Ahumada
2025-06-02 17:35:25
I Bought 2 of these for my Hatsan air rifle, the quality is good but the O Rings did not fit snug enough for the rifle fill port so i got slightly thicker ones and that did the trick.
G
2025-05-14 12:39:02
Quality of the brass is fine. The supplied O rings are too small to seal when filling the air rifle. Fortunately I had a couple spare O rings that were the correct size so it now works. Four O rings were included, all the wrong diameter.
salvador
2025-05-05 15:25:23
Tal y como se describe
Conny Haglund
2025-03-29 12:16:46
O-ringarna var i tunnaste laget så dem bytte jag ut
Stephane Toth
2025-03-05 11:56:18
Reçu très rapidement,Sonde de bonne qualité,juste les joints toriques à changer car pas adapté sinon c est parfait pour mes deux carabines kral et hatsan
Cliente
2025-02-18 16:58:59
Prodotto di buona fattura per il mio uso niente di negativo
DV
2025-02-01 15:05:14
Useless without proper o rings
Recommended Products
