Your cart is empty.
Your cart is empty.Product Description
GS Series Inverter
- GS inverter is low frequency pure sine wave Dc 48V to AC 220V all in one inverter. Electrically integrated solar inverter consists of a 8KW 10KW and 12KW DC 48V to 120/240-volt AC split phase pure sine wave inverter with two 80A MPPT solar charge controller, and AC charger to DC battery charger and an automatic transfer switch ideal for your off-grid solar system.
- With reliable intelligent design, GS series solar inverter can be available to complicated appliances.Not only used for common appliances such as TV computer, lights, fans.but also suitable for inductive loadings such as refrigerators, airconditioners, motors, pumps compressors and laser printers.Convertible to electrical energy from wind and solar.
Important Safety Warning
- Before using the unit, read all instructions and cautionary markings on: (1) The unit (2) the batteries (3) all appropriate sections of the manual.
Solar Charger Mode Specifications
- This Inverter Support 2x80A MPPT Solar Charger Controller
- The maximum solar charging current :2x80A=160A
- The maximum charging current : 240A (2x80A MPPT+80A AC Charger =240A)
- Rated charge current:160A
- Rated Battery voltage:48VDC
- PV Input voltage range:60-240Vdc
- Max. PV open circuit array voltage:250Vdc
- Max. recommended input power (W) :2*4500W
GS Series hybrid Inverter is designed to serve as a backup power supply for AC loads
- The input power of GS Series hybrid Inverter comes from PV system and AC grid which not only supply power to AC loads but also charge the battery bank when the power from AC grid or AC generator is present (also known as Line Mode).
- In the event of AC grid (or AC generator) outage, the AC loads can be alternatively powered by PV system (if the illumination is sufficient) and battery bank.
- GS inverter realizes the use of solar energy and wind energy to convert into electric energy, which can save more electricity bills and allow you to use electricity freely.
- With lithium battery communication function.
8KW split phase pure sine inverter charger DC 48V AC 240V input AC output 120V/240V
- Automatic Generator Starting (AGS)when low battery voltage or no utility.
- Support 2x80A MPPT Solar Charger Controller.
- 8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries）.
- 5 stages adjustable AC charging current. AC charging also can be closed.
- Powerful Charge Rate Up to 240Amp, Selectable From 0%-100%.
- Built-in transfer switch and battery charge, backup or off grid power solutions.
- AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration.
- 4-step Intelligent Battery Charging, PFC for Charger.
- Smart fan adjustment(The fan automatically adjusts the wind speed according to the ambient temperature).
- Remote control line can be connected (without accessories, optional accessories if needed).
2. Wireless Router Connection
2.1 Download APP.Scan the QR Code and download the APP
2.2 Connect Wi-Fi Datalogger
- Select the same number of Wi-Fi Plug Pro PN to connect on your Phone WLAN.(InitialPassword:12345678)
- Open the APP, tap the Wi-Fi Config button to enter this page.
2.3 Network Setting
- Then tap the Network Setting button. According to the prompts, type in the information to finish the network setting. After the Wi-Fi Plug Pro is restarted,reconnect the Wi-Fi which connected by step 2.1.
3. Create Account And Add Datalogger
3.1 Create Account
- Open the APP, tap the Register button to enter this page.
- According to the prompts, type in the information to create an account.
3.2 Add Datalogger
- Login the account and click the Datalogger button. Tap the “＋” button on the top-right corner of the Datalogger page.
- Scan the PN on the Wi-Fi Plug Pro, or input it manually.
- According to the prompts, type in the information to finish add datalogger.
Earthing(ABYC standard)
- Inverter mode: the neutral and the earth joined
- Line mode: the neutral and the earth separated
- Use a Relay to realize the function.
LCD OPERATION
LCD Panel and Configuration Switch
Smart fan Adjustment
The fan automatically adjusts the wind speed according to the ambient temperature
Low Frequency Split Phase
48 VDC input, 240V input VAC to 120/240V AC split phase output This low frequency unit is a combination of an DC to AC power inverter, battery charger and AC auto-transfer switch into one complete system
Inverter Output Specifications
- Continuous Output Power: 8000 Watts
- Surge Rating: 24000 Watts
- Output Wave Form: Pure Sine Wave
- Output Voltage: 120/240Vac
- Nominal Efficiency: 90% (Peak)
- Line Mode Efficiency: >99%
- Output Frequency: 50Hz / 60Hz ± 0.3Hz
- Typical Transfer Time: 10ms
Inverter Input Specifications
- Nominal DC Input Voltage: 48.0Vdc
- Low Battery Alarm: 42.0Vdc-44.0Vdc
- Low battery Trip: 40.0Vdc-42.0Vdc
- High Voltage Shut-down: 64.0Vdc
- Low battery Shut-down Recovery:44.0 ± 0.8Vdc
- High battery Shut-down Recovery:62.0 ± 0.8Vdc
- Idle Consumption: 23 Watts
- Nominal Input Frequency:50Hz / 60Hz (Auto detection)
Charger Specifications
- Output Voltage: Based on the AC output voltage gear you set
- Battery Initial Voltage for Start Up: 40-62.8V
Nominal Charge Current:
- 12VDC model: Max 90A
- 24VDC model: Max 70A
- 48VDC model: Max 80A
Over Charge Protection:
- Bat. V ≥15.5Vdc, Fault, Buzzer alarm for 12Vdc
- Bat. V ≥31.0Vdc, Fault, Buzzer alarm for 24Vdc
- Bat. V ≥61.0Vdc, Fault, Buzzer alarm for 48Vdc
howk m. leung
2024-12-22 15:42:41
I like it very much
Recommended Products