Your cart is empty.
Your cart is empty.Product Description
The Acteam Blind Spot Detection System is a vehicle assistance device that helps driver lane changing safely during driving.With the aid of ultrasonic sensor, probe the side/rear of the vehicle for those moving objects into the blind spot of the detection zone.
About Acteam
Acteam is professional in designing car and motorcycle accessories, and we are committed to using our plentiful experience to serve our customers better.
Main Functions:
1. 3 in 1 universal BSD system
2. Warning with LED and buzzer
3. Lane change assistant
4. Whole weather working, no effect by frogy, rainy or snowy day
- Working Voltage: DC 9~16V
- Working Current: 190MA±5MA
- Working Temperature: -40℃~+85℃
- Speed range: ≤120KM/h
- Detect range: Rear side 6 to12 meters
- Warning: Buzzer and LED light
The system will analyze the reflected signal sent by two microwave radar sensors behind the car. When there is a vehicle in the detection area approaching quickly, the indicator light will flash. If turn on signal lamps, the system will emit "Di-Di-Di" sound and LED indicator flash to avoid accidents occurring.
Only detect vehicles that are moving in the detection area,and do not alarm when the no moving vehicles or the vehicles beyond the blind area.
Tere M.
2025-08-04 16:39:17
The media could not be loaded.
Rodolfo Cabrera
2025-08-03 10:43:44
This item was delivered using the box itself, not packed on a bigger box as amazon normally does. The box was opened and ripped of on one side, the main system box was missing. very dissapointed. Worst, the instructions were in chineese languagge, worst of all, very bad instructions not even good for chineese speaking people. It looked as not easy to install and missing parts also; now I dont trust ordering any of these devices, ; and I really wanted one for my car
Island Guy
2025-07-05 10:00:35
I purchased 4 kits in January 2024. I now got the opportunity to get 2 of these kits professionally installed within the last 1 to 5 days. The system basically alerts you visibly by engaging the little LED lamp which basically indicates that a vehicle is in your blind spot. If you engage your indicator/turn signal, whilst there is an active blind spot alert, the system will sound a buzzer. It’s not as sensitive and long range as a factory installed system but it works. There is no rear cross traffic alert in this kit though. The interior lamps should have an a slightly better design to be attached to the ‘A’ pillars but overall, I think it’s a good purchase and will update this posting as time goes by. I have no reason to doubt that these accessories will continue to be improved upon and newer generation kits would be far superior.
Pedro E. Granizo
2025-06-29 21:17:38
Great product, great service, works perfect!
EEH
2025-04-20 10:31:38
NO written directions, NO information on how high to mount sensors, Wires marked good, I am a retired mechanic so I was able to get it in and working, MANY MANY MANY false alarms, but overall it sort of works for a system about 90$, power wire WAY too short, I have it wired so it can be disconnected fast n easy if too many false alarms, if it wasn't such a pain to install I would remove it and return this product, better than nothing but not by much, sets alarm with concrete road dividers, trees, bushes, alot of times misses cars coming up from behind, dont waste your time and money
Chandra subba
2025-04-12 17:50:39
Easy to install and it’s work
Ryan
2025-03-24 12:39:26
We have an SUV and the cables will barely reach unless you have the unit in the center of the vehicle.There is excessive cable to the LED.VERY INEXPENSIVE & NOT WORTH THE TROUBLE.
dude123292
2024-12-24 14:00:21
Pretty straight forward installation. Needed to remove the bumper cover and some interior panels. Can be a bit daunting at first but everything is pretty much held on by clips. Put it where the factory bsd sensors should be. Wire tapping was tricky maybe include some taps in the kit?. It be nice if it had a diagnostic mode (maybe some diagnostic lights on the cpu/logic Xbox) but in the end very good value. Doesn’t mention what the door sensor should be hooked up to but I put it on my trunk light. Will be testing it out over the next few days but seems to be working well. A great deal for all the tech. It says high quality and it really is. Sensors seem solid and waterproofed. Good water proofing around the cables to the cpu/logic box. Maybe include some rubber sleeves around some of the connectors.
BriBri
2024-12-07 19:13:45
Sensible install instructions. Not difficult but is time consuming installation on my Ford Edge. Like that the sensors are hidden inside the rear bumber cover and mounted to the vehicle. Couple of wires related to reverse wire connection (cross traffic perhaps) and door wire connection (vehicle or object approaching-opening door warning perhaps) were confusing but hooked them up anyway. Works very well. Good value for money.
Trav
2024-11-29 10:01:08
Didnt work for me
Recommended Products