Your cart is empty.
Your cart is empty.Product Description
Christopher
2025-08-03 12:53:58
The old headlights for my 1968 Dodge D200 were so dim they barely looked like parking lot lights. I installed these quite easily and they are massively different in terms of brightness. They also feel like good quality overall. Maybe a bit more fragile than the stock ones but much brighter. They did not fit perfectly and I had to bend the insert area on the truck itself a bit but after they they fit in place just fine. Overall very happy.
Eric W. Gast
2025-08-01 10:58:30
Purchased these lights for my 2009 Jeep Wrangler, l had to grind some of guides on the base otherwise it would not fit. Once l made the adjustment they slotted in fine and work better than expected. These are the WHITE HALOS, I originally bought the blue ones however the police stopped me and told me they were against the law to be running blue lights unless I was a police officer. I ordered the white ones and they and look just as nice and I don't have to worry about the police stopping me anymore.
Steph G.
2025-07-15 17:48:38
Bought this headlight for my hubbys Harley Street glide & he loves it! Very bright, good quality & sturdy. He has a 2018 Streetglide Special & it fits perfectly! Two comes in a package so we're selling the other one, great value for these types of lights.
Jen Montoya
2025-07-13 20:09:53
Easy to install and they look awesome I don’t know if the foggy lense is permanent or not other than that highly recommend
J. Turner
2025-04-23 18:11:57
Bright white light - makes my old car feel like a new car at night. Basic install only took a few minutes.
K. O'keefe
2025-04-22 17:36:00
I will start off by saying the lights do look nice and the wiring was not hard, but the requirement to grind down the tabs was not as easy as the instructions say. Grinding the tabs down causes the headlight to be loose in the bracket. Not only did this require the purchase of an angle grinder to modify the lights, it also required the purchase of some kind of filler, like adhesive weather stripping, to fill the gap now present in the bracket. Not having the tabs also allows the headlight to spin freely within the bracket so I hope that vibration will not cause this to happen over time. Having the lights ground down and installed probably voids the warranty as well. While I was able to get these installed and they look and work for now, I hope they last for a while. My suggestion to the seller/manufacturer is that if it does not fit without modification, don't indicate it will fit in the vehicle. 2010 Jeep Wrangler JKUEdit: after all the work to install these they flicker horribly. Returning. These lights were. It good.
baseballer34
2025-04-09 17:59:27
These are good lights so far. The trouble is you have to switch wiring. You have to change the white and blue wires On the supplied harness so the bright lights work. You have to take the white and the blue wires out of the connector and switch places with them. Also, they supplied harness will not click into the Jeep connector so you must zip tie it snug. You also have to rewire the halo lights into the existing harness of the running lights on each side. Then you might have to grind down the tabs so they will fit into the cavities. I had to do all this to get them to work properly. But with that said for the price these are Bright a look great. So if you have the ability to do the work these work great for this price.
devyn troon
2025-03-23 17:27:44
Very bright. Pretty easy to install. Just the main plug and 2 power wires for the day time running light and turn signal. Ground is in main plug. Amber halo is super bright as well. They did fit a little tight and did have to take the moisture plug off the back to make them fit in my 72 el Camino. But over all very happy. Will update if there are any issues.
Louie Salmon
2025-03-01 20:28:03
So I think for the price they are great! The the DRLs are cool. You can get the same headlights for cheaper on other Chinese whole seller sites. Okay the issue here is that the headlights at night on low beams cut out after 20 mins. I've checked the installation, cleaned the connectors double checked everything. And it has to be a over heating issues on the LEDS... Luckily the DRL ring still stays on so you're not invisible but still super dangerous. This happened after a month of having them installed. But only round to writing this review now.
sandra everett
2025-02-28 12:33:38
2017 Jeep jk … lights flicker and throw faults contacted seller as their description said they would provide decoder to make it right. Well guess what they came up with excuse that they can’t ship to Canada even though the lights weee listed and purchased on Canadian siteBuyer beware… would not purchase from this seller again.
JR
2025-01-24 14:06:43
I new going in that there may be issues due to the price and the "may have to cut off lugs" warning, but I did it anyway. The warning was correct. I had to cut off two lugs on the rear of the light. However; it still did not fit correctly and the light moved easily in the bucket so I had to do some shimming.Secondly, the connector does not mate well with the OEM connector on the Jeep. I had to zip tie it to keep it from disconnecting. I had to replace the crappy non water tight connectors to the turn signals and DRL. Looks good. We will have to see how long they last.In short, you get what you pay for.I would not buy them again.
Recommended Products