Your cart is empty.
Your cart is empty.Product Description
Information
Reamers are with one or more cutter teeth. Holes can be with exact size and shape after the reamers' processing. Finished product can be smooth, intact and more beautiful.
Reamers can be used to process holes in small cuts based on guiding function, such as: holes with diameter tolerance in ≤IT8; holes with requirements in surface roughness (≤Rz12 generally); holes with requirements in roundness tolerance; holes with requirements in cylindricity; stepped holes (different diameter holes on the same axis); series holes (diameter holes on the same axis) with requirements in high coaxality.
Chucking Reamers
High-speed Steel Tool
High-speed steel tools are with combination of hardness and toughness for wear resistance. Suitable for most general purpose applications.
Straight Flute
Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications. For reaming cylindrical shape holes.
No Coatings
Designed with the base substrate without any additional coatings, good for wide ranges of applications.
Features
- Used for light cut, repair work, removing stock or simply for enlarging holes.
- Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines.
- Round shank can be used with a wide variety of tool holding systems.
Wide Applications
Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.Used for semi-finish machining and finish machining of holes.
Designed for accurate reaming in aluminum, cast iron, copper, alloy steel, die steel, plastic, wood, etc.. Use on all types of equipment including screw machines, turret lathes, drill presses and machining centers
bob
2025-08-23 13:36:09
Works great with my mini lathe
Customer
2025-08-22 18:49:25
Tools looked great, used the .125 diameter one. Worked fine
Outback Joe
2025-08-19 16:44:47
These are good reamers that come very close to the stated size. They all measure just a few thousands under size but for most of the work I do they are fine. Overall they are nice and sharp with clean and straight flutes. These all have laser markings of the size on the shanks so they are easy to identify. So, these are good for making small precise holes and the price for all four is very reasonable.
ezedude
2025-08-12 11:02:01
These are great for reaming out holes and carry throughs after powder coating. Only wish is they included3/8†and 1/2†as well to complete the most commonly used reams.
Avidreader
2025-08-06 11:15:36
Cut well. Right dia
Kindle Customer Terry
2025-07-22 10:24:19
I’ve only used one so far and it did the job ok
Customer
2025-07-20 15:28:16
Perfect for this job.
Al
2025-06-26 15:09:55
Absolute waste of money. The flutes broke before I got even one complete revolution. Cutting oil was used. I'd give it zero stars if that was possible.
Don C
2025-05-18 12:22:20
Product was as advertised
Ross Thompson
2025-05-04 14:16:00
Good selection of sizes of reemers but don't use them on anything harder than brass or aluminum. Otherwise, they did what they were supposed to do and were accurately sized. The shaft has been carefully ground where the reemer portion is as is the portion that would fit in the chuck, seem to be perfectly in line. However the portion of the shaft, unfinished between the ground surfaces, was rough and not concentric with the ground surfaces. Get what you pay for generally so I'm not complaining, just noting. Need the metric sizes now.
kcwcc
2025-04-30 17:16:41
If you're expecting to ream thick metal with cheap reamers then you deserve what you get. These are perfect for reaming out 3D printed parts, which is why I purchased them. It is true they are shipped loose but under a microscope (you do have one right?) there were no issues. I just 3D printed a stand for them...and used them to ream the holes to fit! No issues. I suspect these would be fine for annealed copper and aluminum but I have not tried it.
Bert Marchand
2025-04-18 16:49:07
it does the job removing rust and scale
Tom K
2025-01-02 13:40:40
Low quality and accuracy, all four are put in one plastic sleeve and chip each other.
Recommended Products