Your cart is empty.
Your cart is empty.Product Description
1. What is a dowel pin?
Generally divided into dowel Pin,slotted spring pin,clevis pins,taper pin and so on.
It is mainly used for positioning and connect two parts, make your equipment more stable .The Pin fixed in the installation hole by Presspassung.
2. How many materials?
Location pin materials are stainless steel SUS304, SUS316, carbon steel C35, C45, etc., heat treatment and hardening are required under high strength requirements.
Dowel Pin Size
Diameter range:(Ø)
3/64"-3/8" 1.5mm-10mm
Length range:(L)
3/16"-4" 4mm-50mm
Diameter Tolerance:
+0.0008"/-0.0008"
Length Tolerance:+0.02"/-0.02"
Uxcell
Our group comprises factories in Asia that manufacture OEM and aftermarket consumer products.
We believe in FACTORY DIRECT purchases.Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever.We perform sourcing, quality control and fulfillment. We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy.
Install
This cylindrical locating pin has special chamfering on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase.
Connection
The pin is one of the unthreaded cylindrical pin fasteners. When connecting, make sure to keep the alignment between the hole positions between the connecting components. In order to maintain the best firm performance, a metal adhesive can be added at the fixed end of the locating pin.
Notice:
For a tight fit, your hole should be equal to or slightly smaller than the diameter shown (Diameter + 0.006"/-0")
Pirate Cat
2025-06-26 20:51:46
I appreciate that these are camphered, and there were enough for me to use in multiple clamps. I only wish they had an even shorter version, it looks like 10mm is their smallest size.
Nick R
2025-06-24 15:01:17
Worked well for what I needed.
"mdpx"
2025-06-20 15:02:14
Item just as described. Although it’s a bit snug if u want to put metal on metal pin. I had to use some oil/grease to get the pin in. And it will probably never come out lol but that’s fine.
Dre
2025-06-15 16:17:38
Did not mic them for actual dimensions, but they are straight and finished well. My set was used for hidden shelf pins.
Bob57783
2025-05-09 16:52:02
The pins were well made and worked as described. I would buy again.
Candice Kirkland
2025-05-03 17:39:29
The size is not what I was looking for
Ryan
2025-03-27 11:21:11
Worked great as hex pins for an RC car
Lets Go Brandon "FJB"
2025-03-24 15:22:29
good
Jase Bouchard
2025-03-22 12:50:37
Undersized
Chacapamac
2025-01-23 14:05:11
Work perfectly for my purpose
Consumer 99
2025-01-12 16:45:55
Good product
Recommended Products