Your cart is empty.
Your cart is empty.Product Description
Flexible Helical Shaft Coupling
For small torque shaft connection. Absorption of parallel, angular misalignments and shaft end-play by spring action
Introduction of Shaft Couplings:
Know the Size You Need
We provide various kinds of rigid flange coupling for choosing. Please check the correct size: d1, d2, L, and D before purchase
DIY Applications
Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling
CNC Machine
Flexible coupling suitable for model shaft connection, perfect accessories for RC Model motor, etc.
Robot Replacement
A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly
crazytekkie
2025-09-04 17:30:30
So we are using ours on a food printer which as I found out is a glorified 3d printer with an Epson attached to its elevator mechanism. This was to replace a broken OEM part and it's doing just fine raising and lowering that heavy contraption on a daily basis.
Engineer95051
2025-09-02 10:27:43
Worked great. Nice smaller diameter.
GEBrown
2025-08-22 16:04:43
I have purchased several items from UXCELL and every time the product has been great quality, shipped promptly, well packaged, and arrived on time. This time was no exception.Recommended
Roy
2025-08-19 11:14:12
Works well. Good tolerances.
Michael Amato
2025-08-18 11:35:37
Works, build quality is not perfect, but it holds shafts together.
nathan
2025-08-17 20:01:59
I ordered two 6mm to 6.35mm couplers. One came in the correct size. One came in the wrong size, 5mm to 5mm. Also, the correct one came in an antistatic bag, the wrong sized coupler did not, not that it matters much but something to look out for. Luckily, the sizes i need could be drilled out easily with common imperial bits (1/4th in in for the 6.35mm and 15/64ths for the 6mm in case you need to do the same). Mine DID come with the grub/set screws which I'm happy about. From other reviews saying they did not, I was worried about that. Overall decent quality. Holes seem concentric enough.
Amy Richardson
2025-07-29 10:07:46
Coupler worked well with 1/4 steel rod.
Jake Smith
2025-07-18 14:21:12
Nice quality and fit. Note $10 price is for one coupler only. If you have a dual lead printer you can get 2pcs for same price from multiple other venders here. I went with these because I trust the name and it’s a quality part. I will pay closer attention to descriptions next time.
SIR
2025-07-14 10:44:46
Not that great a quality with burrs on the inside resulting in the coupler not being able to move as freely causing problems.
luis D.
2025-07-12 18:16:58
Parfait
Bradley Halls
2025-07-05 10:32:42
Perfect
crazytekkie
2025-06-26 12:57:36
So we are using ours on a food printer which as I found out is a glorified 3d printer with an Epson attached to its elevator mechanism. This was to replace a broken OEM part and it's doing just fine raising and lowering that heavy contraption on a daily basis.
Engineer95051
2025-06-14 10:21:54
Worked great. Nice smaller diameter.
GEBrown
2025-04-22 17:49:21
I have purchased several items from UXCELL and every time the product has been great quality, shipped promptly, well packaged, and arrived on time. This time was no exception.Recommended
Roy
2025-02-26 18:43:26
Works well. Good tolerances.
Michael Amato
2025-01-29 13:17:07
Works, build quality is not perfect, but it holds shafts together.
nathan
2025-01-24 13:34:41
I ordered two 6mm to 6.35mm couplers. One came in the correct size. One came in the wrong size, 5mm to 5mm. Also, the correct one came in an antistatic bag, the wrong sized coupler did not, not that it matters much but something to look out for. Luckily, the sizes i need could be drilled out easily with common imperial bits (1/4th in in for the 6.35mm and 15/64ths for the 6mm in case you need to do the same). Mine DID come with the grub/set screws which I'm happy about. From other reviews saying they did not, I was worried about that. Overall decent quality. Holes seem concentric enough.
Amy Richardson
2025-01-17 14:45:43
Coupler worked well with 1/4 steel rod.
Jake Smith
2025-01-10 10:10:51
Nice quality and fit. Note $10 price is for one coupler only. If you have a dual lead printer you can get 2pcs for same price from multiple other venders here. I went with these because I trust the name and it’s a quality part. I will pay closer attention to descriptions next time.
SIR
2024-12-25 10:09:53
Not that great a quality with burrs on the inside resulting in the coupler not being able to move as freely causing problems.
luis D.
2024-12-10 15:53:34
Parfait
Bradley Halls
2024-12-07 19:23:52
Perfect
Recommended Products
$9.99
$ 4 .99 $4.99