Your cart is empty.
Your cart is empty. Description:
Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.
These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.
AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.
Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.
Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
Specification:
Bearing Modle: AXK2035
Bearing Washer Modle: AS2035
Needle Roller Meterial: Chromium Steel (GCr15)
Cage Meterial: ST13 Steel
Bearing Washer Meterial: 65Mn Spring Steel
Bore Diameter (d): 20mm
Outside Diameter (D): 35mm
Bearing Thickness (T1): 2mm
Washer Thickness (T2): 1mm (Approx.)
Dynamic Load Capacity (Cr): 12.9kN
Static Load Capacity (Cor): 45.6kN
Limiting Speed (Oil): 8500RPM
Package Contents:
5 x Bearings
10 x Bearing Washers
Bill
2025-08-09 13:44:21
I’ve used these bearings to modify my rolling suitcase swivel wheels. I recently purchased a brand new suitcase online and used it only one time to my trip to Japan. Suitcase wheels failed after a few blocks of walking to our hotel. After returning home to the US I removed the wheels and inspected as to why they failed. I noticed that the construction is very poor. Swivel assembly was only a stamped pin with washers causing a lot of wobbly movement on the swivel pins which made the wheels fold on them selves. Now i have these non wobbly swivel wheels constructed with roller bearings. A+ improvement
Mickey J. Curtis
2025-08-08 10:52:48
Used these to add to front steering spindles to reduce friction when turning my Cub Cadet lawn tractor. Feels like “power steering†now.
GEORGE MCINTYRE
2025-07-02 12:17:36
product was as ordered, my only complaint is shipping time
PT
2025-06-04 18:10:03
I redesigned the jet pump from a small boat to use this thrust bearing to handle the axial loads instead of the radial bearings it originally used. Now the stock radial bearings just keep the axle centered while this thrust bearing does it job. Pump has a higher rpm ability, lower friction, lower heat, better performance, and greater reliability. Has handled 4500 rpm + at full throttle for extended periods without issue. Have used in at least 100 pumps now!!
Christan S.
2025-06-03 11:36:08
I used these bearings on the steering on my lawnmower. After installation and greasing them up. My lawnmower turns like a cadillac.
Jeff Marks
2025-05-30 20:42:12
Didn't work very well on my Husqvarna riding mower. Can't really notice any difference since installing them on both sides. Was hoping for a more noticeable power steering effect. The bearings themselves are fine, but they just didn't do much for the steering as I'd hoped they would.
Nathan Tate Jr
2025-05-11 20:46:36
Very enlightening!!
Customer
2025-03-05 10:21:56
used for all thread bearing puller worked great.
JDK
2025-01-20 20:29:48
I used these bearings on an old craftsman ride on lawn mower steering spindles . Made turning easier
Recommended Products
