Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell Ball Nose End Mill 0.5mm Tip Radius Solid Carbide AlTiSin Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC45 with 4mm Shank 50mm (2-inch) Length

4.3 (3) Write Review
Free shipping on orders over $29.99

$9.59

$ 4 .99 $4.99

In Stock

1.Size:0.5mmx2mmx4mmx50mm


About this item

  • Ball Nose End Mill: Cutting radius: 0.5mm / 0.02"; cutting dia.: 1mm / 0.04"; cutting flute length: 2mm / 0.08"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC45.
  • Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
  • Wide Applications: Suitable for milling and cutting of carbon steel, malleable cast iron, alloy steel, stainless steel, etc. For slot and hole machining. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
  • Features: Ball end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
  • Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.


Product Description

Ball Nose End Mill

Solid Carbide (P05 Carbide)

P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency.

Features

Features ball end cut, 2-flute design. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting.

Composite Coatings

The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.

Wide Applications

Suitable for milling and cutting of carbon steel, malleable cast iron, alloy steel, stainless steel, etc. For slot and hole machining.

Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.

Tips

The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.

Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.


Antonio Perez
2025-07-13 10:47:51
Exellent
Matin Taraz
2025-03-07 18:31:48
The End Mill worked just fine cutting the deep part it was intended for.
Jean Leon Desgagne
2025-02-02 15:39:09
produit ok
Recommended Products
Drill America 1-1/4' X 1-1/4' High Speed Steel 2 Flute Single End Ball End Mill, DWC Series

$82.01

$ 34 .99 $34.99

5.0
Select Option
40pcs End Mills CNC Router Bits, 1/8' Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose, Nano Blue Coat & Titanium Coat, MC40A

$34.99

$ 17 .99 $17.99

4.3
Select Option
1/2' Carbide Ball Nose End Mills - 2 Flutes End Mill Bits, Tungsten Milling Bit CNC Cutting Tools for Stainless Steel, Forge Steel, Hardened Steel, Copper, Alloys & More

$32.99

$ 15 .99 $15.99

4.8
Select Option
uxcell 10pcs Ball Nose End Mills CNC Router Bits, 1/8' Shank 1.0-3.175mm Spiral Upcut 2 Flutes Solid Carbide Cutter Milling Tools for PCB Acrylic Plastic Wood Aluminum

$11.69

$ 4 .99 $4.99

4.3
Select Option
Tapered Ball Nose End Mill, 0.5mm Radius 6mm Shank 30 Degree Angle, Micro-Grain Carbide 2 Flutes Milling Cutter CNC Router Bit - (Applications: for Stainless Steel Aluminum)

$15.69

$ 7 .99 $7.99

4.5
Select Option
uxcell Ball Nose End Mill CNC Router Bit, 1/16' Radius 1/8' Shank Solid Carbide TiAlN Coated Upcut Spiral 4 Flutes Cutter Milling Tool, 1/8' Dia 3' Total Length

$15.59

$ 6 .99 $6.99

4.9
Select Option
3D Carving Tapered Angle Ball Nose CNC Router Bit, 3.6 Degree NACO Coated Solid Carbide, 1/16' Cutting Dia, 1/32' Radius, 1/4' Shank, 3' Overall Length, 2 Flutes

$26.97

$ 12 .99 $12.99

5.0
Select Option
5PCS Solid Carbide Ball Nose End Mill Cutter CNC Router Bits, Double Flute Spiral Milling Tool 1/4 Inch Shank for Milling Metals, Alloy Steels, Hardened Steel

$43.99

$ 19 .99 $19.99

4.6
Select Option