Your cart is empty.
Your cart is empty. - Made of carbon steel, oxidized black finished, good rust and corrosion resistance.
- The pitch and spiral angle of the fine thread is smaller, which is more conducive to the self-locking, so the fine thread are generally used in places where it is necessary to prevent loosening.
- Design with thread inside, 4-slot slotted round nut.
- Operated with hook spanners (not included here).
- Widely used for roller bearing, axial shaft, pump valve, etc.
Specification:
Material: Carbon Steel
Finish: Oxidized black
Thread Size: M24x1.5mm
Type: Fine Thread
Outer Diameter: 39mm / 1.54"
Height: 10mm / 0.39"
Package Content:
2 x Slotted Nuts
Customer
2025-08-17 11:56:50
I wound up not needing them but they are nice jam nuts
David
2025-08-13 18:06:58
I used it on BBS 02 but they are thicker
John A.
2025-07-27 16:15:19
The locking nut was badly warped when threaded onto the spindle. I put in on a surface plate and sanded it flat until it mated with the bearing preload nut. Had to remove about .040" to achieve this. Lots of sharp burrs on ends of threads as well. They worked though!!
cor
2025-07-25 11:11:53
Better than expected good quality metal
Customer
2025-07-03 17:15:49
I wound up not needing them but they are nice jam nuts
David
2025-04-22 13:26:34
I used it on BBS 02 but they are thicker
John A.
2025-02-16 21:03:59
The locking nut was badly warped when threaded onto the spindle. I put in on a surface plate and sanded it flat until it mated with the bearing preload nut. Had to remove about .040" to achieve this. Lots of sharp burrs on ends of threads as well. They worked though!!
cor
2024-12-23 15:39:11
Better than expected good quality metal
Recommended Products
