Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell M9 x 1.25mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair

4.4 (13) Write Review
Free shipping on orders over $29.99

$14.79

$ 7 .99 $7.99

In Stock

1.Size:M8 X 1.25mm


  • Tap & Die Set: M9 x 1.25 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction. Tap Size: thread length: 23mm / 0.91"; overall length: 72mm / 2.83"; square shank: 5.5mm / 0.22"; Die Size: outside diameter (OD): 25mm / 0.98"; thickness: 9mm / 0.35"
  • Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
  • Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
  • Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
  • Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.


Product Description

1

Information

When tapping, appropriate lubricating oil is good for cutting or cooling, making the cutting easier and faster, improving the smoothness and dimensional accuracy, and helping to extend the service life.

The following lubricants are recommended: steel - cutting oil, machine oil; pig iron - dry oil; aluminum - kerosene; stainless steel - mixed kerosene; hard plastic - dry oil. Be sure to select the appropriate cutting oil for complex tapping process and apply anti-rust oil for maintenance after use.

Round Threading Dies

The round dies can process, correct or clean external threads. Conical locking hole, strong locking and not loose. Great for maintenance and repair work on pipes, boards and machinery.

Applications

Perfect for rethreading existing threads in hard materials like metal, or making new threads in softer material such as plastic.

Easy to Use

Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. NOT suitable for tile, concrete, walls, stone, etc.

Alloy Tool Steel Dies

  • High hardness
  • Wear resistance
  • High hardening capacity
  • Tempering resistance

Tips for Round Dies

The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.

It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. When tapping, add suitable lubricating oil to the cutting edge, and repeat the operation 3-4 times until the thread length is obtained. When using by hand, pay attention to even force and avoid blind force.

Straight Flute Thread Taps

Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow blind holes. Perfect for drilling and tapping aluminum, zinc, alloy etc..

Easy to Use

Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.

Coatings

Features just the base substrate without any additional coatings, suitable for wide ranges of applications.

High Speed Steel Taps

  • High hardness
  • High wear resistance
  • High heat resistance
  • Good process performance
  • Good strength and toughness
1

Tips for Thread Taps

Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is easy to cause breakage to the tap, so it is not recommended. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.


James C.
2025-08-20 16:21:49
Item was shipped immediately and arrived in great time. Worked great and the job is done. Thank you.
r2
2025-08-16 13:39:52
Great tap and die set, just the right size that I needed for a special job.
Lee Daniels
2025-08-08 11:42:33
I have a reasonably full set of metric tap & dies, but of course it did not include the one I needed last week - M8 x 1mm. This one was available for one-day delivery to me, and while not inexpensive (my "nice" set would have cost many times more if each piece were this much), the price is acceptable for the convenience. The quality is "good enough" - I don't think it would last too long if used in rough service or on a daily basis, but it was timely and *exactly* what I needed. It did the job (I used both the tap and the die) cleanly and allowed me to finish up the project at hand.
DERIC WRIGHT
2025-07-21 10:03:49
While assembling an art desk I found threads ruined. This tap and die saved the day.
RussB
2025-06-29 21:49:35
I needed to chase some threads and 10 x 1 is not included in most tap and die sets. This set is inexpensive and is fully useable for light use. Beware, you may need to buy a die handle as it needs a 30mm handle
Liz
2025-05-27 16:05:03
Had it for a couple months - I use it fairly seldomly as it’s an odd size. Broke at a critical time. Even with a tap drill size larger than what’s required. Stuck waiting for a new one.
John Kessler
2025-05-20 15:26:53
Just as expected this combo was not included in the tap and die set I own and of course I needed it one day. This set is of good quality and works great. We’ll worth the money.
kludge
2025-05-16 12:28:07
Works for what I needed.
Dane
2025-05-02 12:33:04
Needed a tool, couldn’t find in town quick enough, this worked great to tap the brake line on my Buick encore
A.J.M.
2025-03-31 10:59:54
En ves de poner macho y hembra separadamente en propias bolsas, pusieron los dos en una bolsa poniendo eso en secunda bolsa. Cada profesional sabe que los cortantes son muy fines y sensibles y que hay que proteger los machos de otras piezas de metal para que no choquean, dañando los cortes. Regrese el producto sin abrir le y recomiendo al vendedor de poner las dos piezas en boldas separadas.
Kboy
2025-02-28 18:34:18
everything is good.
adrien
2025-01-15 14:03:57
Bien
Patrik Stewart
2025-01-12 18:57:51
Very good...good product