Your cart is empty.
Your cart is empty. This is an RTL-SDR blog V4 software defined radio receiver with RTL2832U ADC chip, R828D tuner, 1PPM TCXO, SMA F connector, built in HF upconverter, improved filtering, and aluminium case with passive cooling. Tunes from 500 kHz to 1.766 GHz with up to 3.2 MHz (2.4 MHz stable) of bandwidth. Can be used with free software like SDR#, HDSDR, SDR-Radio, GQRX or SDR Touch on Android. Works on Windows, OSX, Linux, Android and computers like the Raspberry Pi.
This model has several improvements over other brands. It uses the R828D tuner, a 1PPM TCXO, better components, has a built in HF upconverter, a redesigned lower noise PCB, cooling improvements, additional filtering, extra ESD protection and an SMA F connector. It also has a software activatable bias-tee for powering LNA's and active antennas.
This is a bundle which includes the main dongle and also our multipurpose dipole antenna kit. The antenna kit is great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions.
The RTL-SDR Blog V4 requires a driver update. Please follow the installation manual carefully! Reviewers that mention receiving no signals have not followed the instructions! Please feel free to contact us via Amazon messaging for technical support - we're happy to help.
Gengen
2025-08-23 12:54:09
The RTL-SDR Blog V4 comes highly rated from a number of sources on-line and for good reason. It is a very versatile SDR, supported by most available SDR software. The antenna accessories work well too.You may want two of these to work with SDRTrunk.
Customer
2025-07-22 21:10:06
Nice included kit pieces to get started and try it out. Obviously needs longer, bigger antenna to start getting serious but upon first install was able to get AM/FM and FM-HD stations around Atlanta. Got a few other close bands but need bigger (and outdoor) antenna to make it happy. Get and burn the PiSDR-Image, makes it very simple for RPi use. (Pi4 or higher recommended)
Mister Trickey
2025-07-15 17:57:02
I bought RTL-SDR Blog receiver as an affordable intro to Software Defined Radio. - In my exploration of the hardware, I find capable electronics in a quality metal enclosure, for under $100 including antenna kit. This appeals to my sense of frugality as I can begin learning SDR basics with the affordable RTL-SDR Blog receiver. Affordability makes this receiver ideal for beginners learning SDR hardware and software. I recommend the kit antenna, which is worth the extra expense to quickly get started receiving signal. Also, the telescoping dipole antenna design makes it easy to adjust the length of the antenna to better receive specific frequencies. From my experience so far, I do recommend the RTL-SDR Blog receiver to novices entering the hobby, as well as anyone seeking affordable intro SDR equipment. This SDR receiver will likely require some time to learn the basics and configure to your needs. It is not something that is 'plug-&-play' as much as hardware that requires proper installation, and configuration for specific purposes. Buy the RTL-SDR Blog receiver to get started on an SDR learning journey, but expect to invest time learning some necessary basics before use.I find this device a good deal for learning to use current SDR hardware and software. - As an absolute novice, I invested in the RTL-SDR Blog receiver to learn as much as I can about SDR. I chose this as an affordable way to begin learning, and discovered an enthusiastic community of users. This SDR device seems enormously popular with the amateur hobbyist community, with active forums, topical video and web sites.SDR hardware is not 'plug-&-play,' so realistically, expect to invest some time into learning basic setup, device drivers, software configuration. If approached with patience and curiosity, this device is an ideal first SDR.The antenna kit is convenient, and worth the extra cost. I had the antenna assembled, mounted, and attached to the RTL-SDR Blog receiver in less than 10 minutes.I recommend the RTL-SDR Blog receiver to amateurs, hobbyists, and others interested in affordable SDR learning. It is not a, 'plug-&-play' device so expect to invest time in learning hardware, software, and exploration of SDR in general. I have found the hardware is simple to attach to my PC, however software can present learning challenges and opportunities for the curious.
rhawkman
2025-06-16 09:35:30
Great idea and if it worked better it would be awesome. Wouldn't work with airspy or SDR++ but got it to work with SDR console software. I live in the country and it isn't very sensitive. Probably need a good external antenna. Also make certain your PC has every possible update or it won't work. It's cheap tho
Customer
2025-05-26 11:54:16
The media could not be loaded.
ALB
2025-05-13 10:53:30
Set up a bit. I am rusty on PC skills, first use of Win11. Did exactly as the user guide said, and had it working as intended. Nice kit. Everything to get started. Downloads from matched, trusted sources. I am a Tech level amateur operator so have some basic understanding. No excess heat from the " dongle".
Todd
2025-05-04 13:09:18
Excellent SDR. Easy to install, works like a charm. Can't beat the price.
william cutright
2025-02-16 15:41:35
perfect product for what I needed. very difficult to figure out and you need a good antenna
Dr Jorge
2025-01-29 10:46:10
No es lo que esperaba porque con esa antena no capta nada
NetGifted
2025-01-15 12:04:02
I really like this radio. The software is very buggy but it's free and it just works. I had a problem on a mini PC with Bluetooth stopped working and had to reinstall WIndows 11. Not a problem with the dongle just a driver issue. There are no clear instructions on how to make this work. A few youtube videos but overall this is the best value for anyone interested in HAM Radio, I also use it for FM radio in my home office.
Kunde
2025-01-07 21:11:50
Der RTL-SDR Blog V4 ist einfach fantastisch! Dieser SDR-Stick hat meine Erwartungen bei Weitem übertroffen. Der Empfangsbereich von 500 kHz bis 1,766 GHz macht es unglaublich spannend, das elektromagnetische Spektrum zu erforschen und herauszufinden, was alles um einen herum „durch die Luft schwirrt“. Besonders beeindruckend finde ich den integrierten HF-Upconverter, der den Empfang im Kurzwellenbereich deutlich verbessert, und die softwaregesteuerte Bias-Tee-Funktion, die externe Antennen mühelos versorgt.Die Verarbeitung ist hochwertig, das Aluminiumgehäuse sieht nicht nur gut aus, sondern hält den Stick auch angenehm kühl. Egal ob Flugfunk, Amateurfunk oder andere Signale – der V4 macht einfach Spaß und eröffnet unendlich viele Möglichkeiten. Für alle, die sich für Funktechnik begeistern, ist dieser Stick ein absolutes Muss!
Ismaila Sall
2024-12-13 18:33:28
Excellent
chris
2024-11-26 14:20:42
If you’re buying this then you probably know what you want but in a nutshell this single works well with almost all operating systems and SDR applications. I was impressed with the included accessories. Easy to set up. Good value for money. Stays fairly cool during operation with its metal casing. Good reception, better than my handheld scanner in the same location.
Recommended Products
$159.95
$ 77 .99 $77.99