Shopping Cart

Your cart is empty.

Your cart is empty.

VacOil® FF Grade Vacuum Pump Flushing Fluid | 1 Gallon for Edwards, Welch, Leybold, Agilent, Used for Internal Cleaning of Particles & Increase Vacuum Pump Life

Free shipping on orders over $29.99

$45.00

$ 23 .99 $23.99

In Stock

About this item

  • VacOil FF Grade vacuum pump flushing fluid is designed to assist in the internal cleaning of particles and sludge build-up in mechanical vacuum pumps. Using FF Grade Flushing Fluid as part of your regular pump maintenance will ensure your vacuum pump is free of contaminants. Low viscosity helps free contamination from internal parts and discharge it through the drain valve.
  • VacOil FF Grade of flushing fluid oil is used between oil changes to assist in the internal cleaning of the particles and sludge buildup in the vacuum pump.
  • Its low viscosity helps it free contamination from internal parts allowing it to be flushed from the pump through the drain plug.
  • VacOil FF Grade is compatible for use with all other hydrocarbon oils.
  • Each cap is induction sealed to lock out moisture and contaminants.
  • Extend pump life through regular use after every oil change.



Product Description

19 Grade Oil

VacOil FF Grade Vacuum pump flushing fluid is designed to assist in the internal cleaning of particles and sludge build-up in mechanical vacuum pumps. Using FF Grade Flushing Fluid after changing your oil as part of your regular pump maintenance will ensure your vacuum pump is free of contaminants. Low viscosity helps free contamination from internal parts and discharge it through the drain valve.

VacOil vacuum fluids are superior quality molecularly distilled vacuum pump oils engineered to perform and provide the ultimate protection from wear that causes pump repairs and pump failures. Lab tests reveal superior performance such as viscosity change and sediment weight when tested against competitive brand oils, outlasting and outperforming other vacuum oils.

Specifications

  • Vapor Pressure @ 25°C: 1x10-4 Torr
  • Viscosity @ 40°C: 26 cSt
  • Flash Point: (COC): 180°C 356°F
  • Pour Point: -12°C
  • Specific Gravity @ 22°C: .86 g/ml

Why choose VacOil FF Grade Flushing Fluid?

  • VacOil FF Grade of flushing fluid oil is used between oil changes to assist in the internal cleaning of the particles and sludge buildup in the vacuum pump.
  • Its low viscosity helps it free contamination from internal parts allowing it to be flushed from the pump through the drain plug.
  • VacOil FF Grade is compatible for use with all other hydrocarbon oils.
  • Each cap is induction sealed to lock out moisture and contaminants.

Applications

  • Flushing fluid for all types of mechanical pumps using hydrocarbon fluids.

Brand Equivalents

  • Inland FF-10
  • CVP 170
  • TKO-FF

Benefits

  • Lower viscosity frees contamination from internal parts
  • Extend pump life through regular use after ever oil change

Tina Teimouri
2025-07-05 16:59:29
My machine had gotten really rusty. It took three times but I followed the directions and finally it was flushing more clear. I think it saved my machine. I was ready to throw it out
Heather
2025-06-12 17:12:25
Opened and taped closed. It was full...but mineral oil is moisture sensitive.
U. B.
2025-04-18 18:07:52
This product saved the life of my pump.
Onkar Singh
2025-04-11 13:20:31
Love this stuff I actually will use this in the vacuum pump as a regular oil cause this will bring it below 10 and that's amazing I have other brands vacuum oil that can't even pull below 20 but this is just a flushing oil and will pull below 10 I will try theirs vac 19 and vac 20 only thing that comes close are the jb industries vacuum oil and the yellow jacket now have to make sure that the oil will get yellow overtime any vacuum pump oil due to it's ability to absorb moisture so they will turn yellow but usually a good oil is clear like water I also have the robinair as well have to try that though im a HVAC tech and love playing with my toys and try different things.
Chelsea & TR Hartley
2025-01-01 11:20:49
I've only used the product once to clean my Robinair that I use for Wood Stabilizing and it worked tremendously. My pump sounds and acts like brand new. I was having vane sticking issues prior to this purchase. I highly recommend this product for decontaminating your pump after heavy use. I will buy again when this gallon is gone!
Recommended Products

$15.00

$ 6 .99 $6.99

4.7
Select Option

$14.69

$ 7 .99 $7.99

4.3
Select Option

$156.88

$ 72 .99 $72.99

4.9
Select Option

$14.99

$ 7 .99 $7.99

5.0
Select Option

$41.57

$ 19 .99 $19.99

4.4
Select Option