Your cart is empty.
Your cart is empty.Product Description
Get the job done right with VEVOR pallet forks!
Once connected to your forklift or tractor, our pallet forks become a natural extension of your equipment, seamlessly integrated for optimal performance.
Our clamp on pallet forks prioritize your safety with multi-protection and a sturdy design that maximizes stability and safety during use.
With adjustable spacing between forks, our tractor forks can easily handle a wide range of loads with precision.
Our bucket forks boast a generous weight capacity to accommodate all your heavy lifting needs, whether you're dealing with standard or unconventional loads.
Effortlessly connect and disconnect our heavy-duty pallet forks from your tractor or skid steer, just like any other tool in your toolkit.
Jlarson
2025-07-30 12:24:52
We purchased these for our medium duty farm tractor in order to load a truck. They are sturdy and easy to assemble and unassembled. We keep them standing in the corner of a small building while not in use so they don't get weathered and rusty. Adjustable t-bolt on the cross bar immediately broke so I replaced that with a 14mm bolt. Just remember that these extend off your existing bucket so you lose a lot of lift strength. Our tractor that can usually pick up 1500lbs at 6' got cut back to 988lbs at same height due to the load being so far out. Still works for me though. It'll pick up a round bale with no problem. Better than a spear.
Rebecca C.
2025-07-16 10:08:27
We have purchased multiple products from Vevor and these forks are no exception to the quality. For the price we couldn't believe the durability and weight of these when they came. Easy to install and remove. We use these extensively on our farm with zero bucket damage. Everything from moving large pallets to moving hay bales, never one problem with stability or functionality. The design will allow use on multiple size buckets. Fit our 60-in perfectly. Well pleased!
Texas Bill
2025-06-17 20:50:29
I bought these clamp on bucket forks specifically to use as brush forks for moving and stacking brush on a fence line clearing project and they have been a welcome, inexpensive labor saver for that. I considered the shorter four-tine type debris attachments but preferred these longer forks for the extra reach. By curling the bucket up/back, much of the weight rides closer to the bucket itself in kind of a cradle between the forks and a backstop that I made to fit in the provided upright slots. However, by using the backstop slots the reinforcing chain slots are not open for heavier flat-carry loads. Oh well, the bucket I'm using is fairly heavy duty and haven't noticed any bending so far under modest loads, and I plan to keep it that way. Also, having enough rear counterweight on the tractor is important for safety since the load is farther out front. My main complaints are that I'm having to re-tighten the clamps regularly (with a short piece of cheater pipe for enough leverage) and I'm concerned about the threads stripping out over time. Also, the forks will move out of alignment fairly easy if much side pressure is applied. The middle stabilizer bar does help somewhat to keep the forks aligned but the wing-nut set screws are dinky and also need periodic re-tightening.I did consider a set of dedicated quick-attach pallet forks but just wouldn't use them enough to justify the cost difference and actually need the extra forward reach that these forks provide. So, by keeping these clamp-ons tight, going slow and deliberate, and approaching the loads as straight-on as possible, I've been able to move/stack more brush for burning faster than my back could ever tolerate. Your needs may differ, good luck!
Catnar
2025-06-07 16:00:23
My husband wanted these to help move some things around outside. He actually connected his to an old tractor bucket so he doesn’t have to take them off and put back on since he’s got 2. Made it easy to move a small storage container, and especially great for gathering up tree limbs after a storm. Very reasonably priced and sturdy. An inexpensive option to make your tractor have pallet forks.
Wally Wallstead
2025-05-31 16:24:15
These forks are very easy to install, great for saving your back on, lifting all types of objects, not just Pallets, the only negative thing I see, is the clamps loosen up, and the forks can shift to the side, but other than that, they are great, use them on the ranch all the time.
Phillip Adkins
2025-04-23 17:10:56
Excellent for my tractor. Easy to use. Life saver equipment. I would highly recommend.
Andy Evans
2025-04-16 14:30:37
If you need forks for causal use these are well made, quite heavy with good welds and power coating. The price you cannot beat, there are not solid blade but tube and quite this with small taper at end. Getting them to clamp tight on the bucket is quite an issue and mine keeps coming loose, need to get a wrench or bar and murder them down. These are not a good idea on a lighter, thiner bucket. Spreader bar could do with lock not on both forks. Biggest issue is that from the drivers seat, with forks near the ground you cannot see the end of the forks, so either goes, get off, adjust and guess again or have another person to guide you. Those with out a quick connect they are fine or the only real alternative. If you have quick connect then fork out (sic) for the real thing at $800+...you choice
betty jo getsy
2025-03-23 13:33:48
I received the forks yesterday and this morning put them on my tractor to move a few small item only around 200lbs and the stabilizer bar broke at the weld immediately. I’ve contacted vector and will update my review depending on how they deal with this issue.I contacted Vevor and the will be sending a replacement stabilizer bar
Ignacio R.
2025-03-03 17:05:11
Aún no las probé con cargas pesadas pero aparentemente parece que van a cumplir con mis necesidades (cargar al máximo 400 kg)
Jamie b.
2025-01-27 15:19:29
The cross bar broke at the weld the first time I used them, not heavy duty at all
Customer
2025-01-17 18:17:58
These are easy to set up and seem very strong. The instructions for installation are not detailed enough to show how the pressure plates are positioned on the front loader bucket so the screw’s don’t skid off sideways when they are tightened but a bit of thought will soon get them set to the lip of the bucket so they can’t slip.
Handyman
2025-01-11 15:25:16
It’s easy to install but to high to get easy under the Pallet
Customer
2024-12-21 11:23:35
I dont know about lifting 2000lbs with them but I lifted 600lbs on a pallet with no issues. I also place them on the outer edges of my loader bucket and strap a 4x8 plywood sheet to it and use it for clearing up brush around my property instead of using a trailer, its a lot easier to dump and load!
Recommended Products