Your cart is empty.
Your cart is empty.Product Description
VEVOR Magnetic Drill Press
Our portable mag drill is your perfect choice for tight spaces. Its lightweight design allows for easy handling and maneuverability even in limited spaces, making it easy to transport and move.
With a maximum core drilling diameter of Φ1.4 in / Φ35 mm and a maximum core drilling depth of 1.8 in / 45 mm, our mag press is ideal for processing thick metal materials. Its powerful cutting capability reduces the need for multiple drilling, making it more efficient.
The handle is easily detachable, allowing you to carry it to different work sites or store it in limited spaces. Designed with a lever principle, the magnetic drill provides a more comfortable and labor-saving use, reducing fatigue during operation.
The cooling device effectively lowers the temperature of the drill bit and the machine body during operation, maintaining the stability and reliability of the mag drill press during prolonged use. This extends the lifespan and saves on maintenance and replacement costs.
With a 10000N magnetic force, the portable drill press can be firmly fixed to the material surface, preventing movement or loss of control during operation, thus enhancing precision and safety.
1.6" Mag Drill 11 Bits
VEVOR Mag Drill Press
2'' (50mm) | Max Boring Diameter | 1.6'' (40mm) |
13000N (2922lbf) | Magnetic Adhesion | 13000N (2922lbf) |
810 RPM / 1400W | Spindle Speed /Power | 810 RPM / 1300W |
| | Tapping | |
| | 10-Speed Adjustment | |
| | Quick Change Chuck | |
| | Twist Drill Chuck | |
2'' (50mm) | Max Boring Diameter | 2'' (50mm) |
13000N (2922lbf) | Magnetic Adhesion | 13000N (2922lbf) |
810 RPM / 1400W | Spindle Speed /Power | 500 RPM / 1550W |
| | Tapping | |
| | 10-Speed Adjustment | |
| | Quick Change Chuck | |
| | Twist Drill Chuck | |
2'' (50mm) | Max Boring Diameter | 1.6'' (40mm) |
13000N (2922lbf) | Magnetic Adhesion | 13000N (2922lbf) |
810 RPM / 1400W | Spindle Speed /Power | 700 RPM / 1300W |
| | Tapping | |
| | 10-Speed Adjustment | |
| | Quick Change Chuck | |
| | Twist Drill Chuck | |
2'' (50mm) | Max Boring Diameter | 1.38'' (35mm) |
13000N (2922lbf) | Magnetic Adhesion | 11000N (2422lbf) |
810 RPM / 1400W | Spindle Speed /Power | 650 RPM / 1400W |
| | Tapping | |
| | 10-Speed Adjustment | |
| | Quick Change Chuck | |
| | Twist Drill Chuck |
- 2" Mag Drill 6 Bits
- 2" Mag Drill Press
- 1.6" Mag Drill 2 Bits
- 1.38" Low Mag Drill Press
RB
2025-09-03 10:58:51
This mag drill is one heckuva machine... especially for the money! It is heavy, but the electromagnet holds very well. I bought this to drill thru frame rails to install an old plow on an old truck. It worked great! My only negative thought is that it runs a little on the fast side for drilling steel, but it works great with adequate drilling/cutting oil and a little patience when drilling with larger bits. All in all a great addition to my shop! RB
LaDon Catrett
2025-06-21 11:44:59
For all those complaining about it not sticking, you get what you pay for. I use it every day for commercial trailer repair and it works like a charm. NO problems at all.
Douglas
2025-06-12 14:02:28
Overall fit and finish, quality and performance, IMHO, is unexpectedly good. Arrived a day early and in perfect condition. Electro magnets are very strong as is the drill motor (single speed of 500 rpm is a bit faster than what is always desired). Very little runout with the Jacobs Chuck. Overall quill travel and slack is also good. (It would be easier to use if there was a spring loaded quill lock.) Overall a very good bargain for a metal working hobbiest (sic?) and highly recommended.
Rob Quartermain
2025-06-02 13:44:59
This is what I received today. There was also damage to the side but it’s a little hard to see in the photo no I would not recommend and I am not happy.
Brian
2025-05-13 15:41:49
Excellent drill, stays put and works great. Be careful the bits you order, it makes a difference.
Mark Smith
2025-04-27 13:15:26
Bought this to drill holes in I-beams using an annular bit. First off, no directions for anything, so don't bother looking. Simple enough to figure out if you've used one before. Not too impressed with the cheap plastic wire protector around the wires going into the drill motor head assembly. Makes a person wonder how cheaply made all the other internal components are that you can't see. Not included with the drill is the MT-2 taper 3/4" Weldon Shank adapter - $47.99 on Amazon. Also not included is an MT2 drift pin. You'll need this to change between chucks if you want to use both standard drill bits and high speed annular cutters. You can get a set on Amazon (HHIP 3900-0265 4-Piece Drift/Center Key Set (Mt 1-2-3- and 4/5/6)) for $17.10. Throw in another $80 to $200.00 for the annular drill bits, and your bargain mag drill is now up to costing you somewhere between $380 to $500.00!
John Spooner Jr
2025-04-23 10:09:52
Works great, wish I had this sooner! Well worth the money
Earlyn K Bowers
2025-01-13 11:10:28
The drill itself is very good. I did make the mistake to not realize it is 50 HZ not 60 hz. Blows fuses constantly. and the chuck that comes with it wobbles.
denis plourde
2024-12-24 17:01:16
après l'avoir essayer sur plusieurs trous l'aiment est puissant et le perçage aussi possède une bonne puissance
thomas
2024-12-11 14:03:27
a low budget item and work well for lighter jobs
DKB
2024-12-05 15:51:53
Great drill! Easy to setup. I’ve drilled 5/8†holes in 1/2†steel plate with no pilot hole. If you push hard on the handle you can disengage the magnet base but it holds fine for normal drilling. Would be nice to have a variable speed for the larger bits.
Alex shoja
2024-12-01 12:03:32
they didn't have in stock, after placed order they told me they have to bring from china , and i canceled the order
Recommended Products