Your cart is empty.
Your cart is empty.The VideoSecu projector ceiling mount is attractive and light weight. Durable black finish comes with the latest design in safety, flexibility and value for many of today's most popular LCD projectors for home or office. This projector mount is weight tested at 22lbs and designed with adjustable arms to fit most projector brands with mounting ranges less than 16". The PJ1B is 5.5 inch height. The mount features include +/-20 degree tilt, 45 degree pan, 90 degree swivel and +/-15 degree roll. How can I determine if this mount will fit my projector? Projectors may have 3 or 4 threaded holes for ceiling mount. First make sure that the projector does not exceed the 22lb weight limit. Next, find out the maximal diagonal of the holes. It should not be over 16". In other words, if the maxim distance of any 2 holes (especially diagonally) is not more than 16", then the mount should fit fine.
deirdrebeth
2025-07-20 14:03:58
This is by far the least expensive unit - and it does everything and more. It's articulated in all four directions. It's got double screws on each side so when they're all locked down it's very sturdy. It has every bit you need, including 4 different sizes of bolts to go into your projector, and 3 different parts to attach to the center (short, long, and extenders so you can attach each leg anywhere from about 2" to a good 7" long).We've got one bolted to a shelf and the projector is above it, and one bolted to the ceiling joist and the projector hanging below. Both projectors are nice and steady, and when I had to turn them to connect HDMI, etc they rotated right back to where they were supposed to be.100% worth the money, you will not be disappointed.The instructions are a bit odd, so I mostly just figured it out on my own.
Brianstech
2025-07-15 12:54:30
It was back around 2010 when I ordered a VideoSecu wall mount for my TV, and I was highly impressed with the quality. It was only about $25, way cheaper than most other options at the time.So I recently bought an Epson EF11 laser projector for my basement home theater, and needed a good ceiling mount.Well, once again a VideoSecu product showed me how they go out of their way to make quality items for dirt cheap. I mean this new mount was only thirteen dollars!It came boxed very well with many many pieces included for a multitude of mounting options, and even had the right size and length of screws to fit my Epson. It only took a little time to work out a configuration to fit the projector utilizing three short arms.For my $13 I got a solid mount with high adjustability, and it even looks good.*This was NOT part of a promotion.*
Jamie
2025-06-07 12:33:23
simple. does what you expect. can slip if not tightened up very well
Brian M.
2025-04-16 14:20:31
Highly recommend this for its sturdy build and it comes with all the options for the different type of projectors you might need mounted. My only complaint is they should include a list that shows which screws and bolts and parts in the pouches are which. They are each labeled on their pouches with a letter, it would have been helpful to have a sheet that explained which letter corresponded with which piece. Pretty easily figured out, though.
EXNO
2025-04-15 12:24:14
For $9.99, this projector works good. I have a heavy 16 pound theatre room projector, and this mount holds it secure and firm. I wasn't expecting to much from this mount since it is $9, but it has went way beyond my expectations. You cannot go wrong with this small ceiling mount. I cannot compare it to a more expensive one, since this is the only one I have purchased. But it does not shake or wabble. Everything is tight and firm.
Papa Skittlz
2025-03-25 12:31:10
This went together really easily. I mounted mine to the iRulu BL20 projector. Comes with a shorter set of feet used to attach to the projector which I needed. I had to order a second one since the first one came without four needed washer/nuts and the company wanted pictures of the parts I got and descriptions and it seemed like it would take forever which was way unnecessary so I just ordered a second one with the intention of returning the first one. However, I decided to keep the first one and mounted the "ceiling" part to a piece of plywood as a base and now can move the projector from the ceiling to the base and have the same adjustment capabilities for outside viewing which makes it really nice. No more stacking things on the table to get it right. Very simple and inexpensive mounting solution.
dfuknb
2025-03-07 12:42:41
This is holding up my projector as solid as any other heavy duty expensive name brand amount would do. It came with more screws and options than I needed and can practically hook up to any projector for device easily. I highly recommend buying this mount. You don't need anything more than this unless you have a tall ceiling and need a longer rod. If that's the case I'm sure you can custom make a ride and attached both beans to the rod for a lot cheaper than anything else you'll find on the market. The projector hangs about 8 inches from the ceiling just to give you an idea. You can't beat it for the price or quality.
Double J
2024-12-21 14:23:59
This was a super buy! Works perfect for our new Epson Home Theater Projector. It took less than 10 minutes to set everything up on the projector and another 10 minutes to mount and adjust. You cannot go wrong with this mount. Glad we chose this vs a $100 mount. Great quality as well.
Crazy
2024-12-16 13:38:35
Bon produit fonctionne bien
Recommended Products
