Your cart is empty.
Your cart is empty.Product Description
CART-PC03P
Adjustable PC Cart with Storage
Whether you have an oversized gaming PC that isn’t compatible with most mounts, or a desk that doesn’t support the weight of a large-mounted PC, this cart lets you display your computer or other electronic devices beside or underneath your desk!
Aesthetic Appeal
Complements most environments with a sleek, modern appearance.
Organize your workspace & keep your PC off the floor
COMPATIBILITY
- Fits: Most computer cases on the market (including full tower ATX cases)
- Weight Capacity: 176 lbs (88 lbs per shelf)
Tronner
2025-09-05 16:20:24
It's a good thing the item comes with a neoprene mat!The item turns out to be very easy to put together with the caveat that when assembling the frame, half of the screws are slightly longer than the others and if they're screwed in on the wrong step they're puncture through to the visible surface of the cart.Is this my fault - sure! It seems it could have been avoided by using parts that either required the same length screw for both parts of the frame construction or clearly marked/painted differently as the size is not tremendously apparent. One turn of the allen wrench too far and they puncture through the top. As it is, I have to place the neoprene mat on the top shelf to avoid the unsightly particle board.Absent that, the product was pretty easy to assemble and seems solid. I thought I had an oversized desktop and this will accommodate what I have and more.
Dana
2025-08-29 12:09:05
The Vivo PC tower case is sturdy and super easy to assemble. I liked that the tower case is adjustable to accommodate for the width of a PC tower, this tower case has wheels, which ensures the PC is not close to whatever surface you have your PC on and that is a bonus. I would purchase another tower case in a heartbeat! Worth every penny.
Toonces
2025-08-04 14:51:02
I quite like this stand. While not anything earth-shattering, it fulfills its purpose nicely at an ok price point, and it's easy enough to build. The included top mat is a nice touch as well.The real selling point to me was its width-- many PC stands simply aren't wide enough to accommodate wide, dual chamber cases. This one does a fine job of that.Assembly tip: pay close attention to which screws you use in a given position. The instructions & packaging are weak in this area. There is one longer screw that should be used where the two support rods cross, but if you're not paying attention you could wind up using that screw elsewhere and causing yourself a problem.It's not an awesome value at the price, but it's reasonably sturdy and it's wide enough for bigger cases. Minus one star for less-than-clear build instructions. At this price point the positions of the hardware should be more clearly marked on the packaging to facilitate error-free assembly.Still, I think I'd buy one again, and that pretty much says it all.
Cool Grandma
2025-07-01 10:21:09
Easy set up when I followed the directions. It’s the perfect solution for keeping my tower off of the ground and underneath my desk which provides me with additional space.
Tina
2025-06-29 13:58:07
This means the APC battery backup and the HP admittedly narrow PC can he held together as the unit they are. And there is 3/8 airspace to spare. This means I can use the bumper pads provided to separate the PC and the APC UPS by 3/8 of an inch so they don't warm from each other. The important point here is that the stand is still sturdy at the widest open separation. As to assembly, quite obvious to the eye so no need to consult the instructions. A flat wrench is provided. The plastic wing nuts are easy. The wheels look a bit small but as this stand is not likely, once in place, to move much, OK. Wheels bolt into nicely pre-drilled and machined sockets so no nuts needed. Fit and finish is very satisfactory. Net: Gonna buy another right now.
Customer
2025-06-23 14:40:26
The strengths of this unit overwhelmingly overcome the modest challenge of tightening the carriage bolts/knobs located UNDER the stand:1. Strong steel frame; precision cut. All parts appear well built.2. Immaculately painted--this is a simple but attractive stand.3. Directions are relatively clear; all necessary pieces supplied.4. Casters SCREW INTO FRAME! I spend 30 minutes fussing with casters on a large paper shredder which merely rest upon the cylindrical posts sticking out from the bottom of the frame.5. Simple, but effective, cushions supplied to prevent paint damage to two sides of frame.I bought this because I believed it would prove a cost-effective, solid stand for a rather expensive desktop. The unit is kept OFF THE FLOOR; can be readily moved for cleaning purposes; and is likely to prove durable over time. I was fortunate, and my selection is extremely pleasing--both visually and functionally. Unreservedly recommended.
Amanda Hut
2025-06-14 18:22:04
Want to wheel around the tower to work on plug-ins on back? This be great.Have carpet that is anything other that tight woven pile? The caster will probably work for you. I have low pile carpet and casters don't roll.Want just something to get it up off the floor without plans to wheel it around? This be fore you.Reason of my return is my husband's desire of "have casters it should work. Plus the sides get in the way if I need to work on something in the tower. So I'd have to pull out the system THEN lift tower out of the stand to work on it. Not pratical."He's a hard critic woth a point. Reason of getting this was to assist him from his complaint of sliding the tower in and out from working on it across the carpet. Solution was adding longer legs under tower - gave him something to hold on to when pulling it out, as well as additional airflow through bottom (slot sitting on carpet).
Roger Mtz
2025-04-28 18:13:38
Lo compre para un subwoofer de 8 Pulgadas de la marca Klipsch y quedo excelente, es fácil de mover además de que las ruedas cuentan con freno, los materiales son de excelente calidad y es fácil de armar y usar.
Derrald Dunkley
2025-04-09 11:44:10
Product arrived missing a small screw for the cross brace which did not hinder the assembly of the stand. I notified customer support and they responded within 8 hours of my email. The product is very easy and quick to assemble. It’s very sturdy as well.
Dahlia
2025-04-08 15:29:12
Fits CPU perfectly and great price
kc
2024-12-23 18:09:36
looks flimsy but supports a very heavy pc without issues
Arturo Fdez-Pacheco Conesa
2024-11-26 12:05:50
Muy solido y pesado para poder soportar la CPU.
Recommended Products