Your cart is empty.
Your cart is empty.
Vtec Solenoid Gasket Kit for Spool Valve
- ☑Direct Replacement
- ☑High Quality Rubber Gaskets
- ☑ Complete Kit
- Compatible with Honda
- -V6 / 3.5L Engines
- -2005 - 2007 Odyssey (EX-L & Touring)
- -2006 - 2008 Pilot (2WD models only!!)
- -2005 - 2007 Accord Hybrid
- Package Includes:
- -Main gasket with filter screen
- -Midle valve gasket
- -O'ring seal for Oil Pressure Switch
- -3x O'rings for the variable timing solenoid
- INSTALLATION:
- ⦿ Clean the whole valve before Install the new seals
- ⦿ Don't Use Liquid / Silicone or Rtv Seals
- ⦿ Replace all Seals at the same time
- ⦿ Lubricated all seals with Engine Oil before installation to prevent damage
- IMPORTANT NOTE:
- Will not work for valves that have used Silicone or RTV seals before
- This is very important, if you have used Those liquid seals before we suggest to get a different clean valve
- it will Save your time and money $$$$$
- Professional Installation is highly recommend
- This is an aftermarket replacement product produced by R20 Racing We have no affiliation with or endorsement from any of the manufacturers mentioned
Britaney
2025-08-13 10:14:12
Gaskets are still holding up. I purchased this a few months ago. They have not leaked, fits perfect. Worth the money as opposed to a physical major auto parts around my area. Easy to install and does it's job as long as you know what you're doing and install it correctly with gasket sealer as well.
Shawn
2025-08-08 16:30:05
Exact fit as described. Saved from having to buy new vtec solenoid. The middle seal only comes with assembly from dealer. Money saver.
Customer
2025-08-06 12:04:59
The media could not be loaded.
Timothy L.
2025-07-01 14:12:04
Perfect fit
concept77
2025-06-28 16:54:04
Decent quality
QualityForLess
2025-06-09 12:54:57
There are two seals and o-rings for the solenoid.The seal that goes inside the component - which was where I had the leak worked! This one is not available from Honda - they want you to purchase the unit not replace the seal. We also tried the seal between the unit and the engine - the engine threw codes and complained of low oil pressure - then idled at 3500 rpm … a definite no go. The seal between the unit and the engine is available from Honda - used that and it worked great. Also replaced the o-rings on the solo iOS but not with the ones in this kit as they did not fit correctly - maybe two were the correct size but we went with a trial and error fit based on solo iOS and making sure each one fit the slot and had slight resistance when inserting the solenoid into the housing.So to summarize - the critical internal to part seal in this kit worked for us - the one connecting to the engine required the OEM seal and o-rings came from a multi-kit and not the ones you get here.I am pleased that the one seal worked as there is no EOM option - hope this review helps you
Lizzeth Reyes
2025-03-14 10:37:26
Los empaques estaban muy grueso para la valvula y lo quebró. Ahora salió más caro el remedio que la enfermedad.
H Schmieder
2025-02-14 18:20:45
Does not fit properly at the screen. Caused pressure to be incorrect and put vehicle into limp mode.
MAR
2025-01-07 11:03:46
Worked as expected. Although I would recommend using the original metal screen from your OEM gasket instead of the ine supplied with this product.
Recommended Products
$48.55
$ 21 .99 $21.99